4787 POMONA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 5/21/02 SY/EH/LS PomonaACCESS 90103 (800) 444-6785 or (425) 446-6010 Last saved by PN More drawings available at www.pomonaelectronics.com S:\\Engineering\\Release\\DataSheets\\FlukeDataSheet\\d_AI_4787_2_02.doc Page 1 of 2 Model 4787 & Assembly Instructions “N” Male Cable Plug Sales: 800 -490-2361 Fax: 888-403-3360 Technical Assistance: 800 -241-2060 FEATURES:
- Cable connection for RG 58 and 142, 223, 141 MATERIALS: Body and Fitting – Brass per QQ-B-626, Alloy 360, ½ Hard Center Contact – Gold Plated Brass per QQ-B-626, Alloy 360, ½ Hard Dielectric – PTFE Gaskets and Seals: Silicone Rubber Finish: Body and Fittings: Tarnish resistant Center Contact: Gold flash over silver plate per QQ-S-365 RATINGS: Nominal Impedance: 50 Ohms Dielectric Withstanding Voltage: 2500 VRMS, 1 Min., 60 Hz. ORDERING INFORMATION: Model 4787
All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 5/21/02 SY/EH/LS PomonaACCESS 90103 (800) 444-6785 or (425) 446-6010 Last saved by PN More drawings available at www.pomonaelectronics.com S:\\Engineering\\Release\\DataSheets\\FlukeDataSheet\\d_AI_4787_2_02.doc Page 2 of 2 Model 4787 & Assembly Instructions “N” Male Cable Plug Sales: 800 -490-2361 Fax: 888-403-3360 Technical Assistance: 800 -241-2060 FIGURE #1 A. Slide clamp nut, flat washer and Vee gasket over cable. B. Strip cable jacket to dimensions shown. FIGURE #1A C. Slide braid clamp over braid positioned with the inner shoulder against the cable jacket D. Fold braid over braid clamp. E. Strip Dielectric FIGURE #2 F. Solder center contact to cable center conductor. FIGURE #3 G. Slide clamp nut, flat washer and Vee gasket forward against braid clamp. A. Place connector body over end of cable, thread clamp nut into body and tighten.