NTCLE203E3_V01 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

www.vishay.com Vishay BCcomponents Revision: 18-Sep-2020 1 Document Number: 29048 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTC Thermistors, Radial Leaded, Accuracy Line LINKS TO ADDITIONAL RESOURCES Notes (1) Response time in silicone oil MS200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 °C in air to 85 °C in oil. Thermal time constant by cooling from electrically pre-heated body (2) Valid for all types with the exception of the R25 values 12 k , 22 k and 470 k

FEATURES

  • Accurate over a wide temperature range (tolerance on B-value down to 0.5 %)
  • Good stability over a long life
  • Excellent price/performance ratio
  • Low heat conductivity through 0.4 mm Ni-leads
  • cULus recognized, file E148885  (UL category XGPU2/XGPU8)
  • Mounting: radial
  • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

  • Temperature measurement, sensing and control in industrial, consumer and telecom applications. For on-board sensing or accurate remote sensing

DESCRIPTION

These thermistors are made of NTC ceramic material. The device consists of a chip with two tinned nickel leads. The parts are coated and color ba nd marked. Tape and reel versions available on request. PACKAGING The thermistors are packed in cardboard boxes; the smallest packing quantity is 500 units. DESIGN-IN SUPPORT For complete curve computation, please visit: www.vishay.com/thermistors/ntc-curve-list/. MARKING The thermistors are marked with color bands on a gray epoxy base coating; see Dimensions and “Electrical Data and Ordering Information”. MOUNTING Important mounting and handling instructions: see www.vishay.com/doc?29222 By soldering in any position. Not intended for potting. Notes Preferred versions for new designs (1) Replace * in SAP by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 % (2) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 °C 2K to 470K  Tolerance on R B25/85-value 3528 to 4570 K Tolerance on B25/85-value ± 0.5 to ± 2.0 % Operating temperature range at: °CZero power dissipation (continuously) -40 to +125 Zero power dissipation (for short periods) (2)  150 Maximum power dissipation at 55 °C 100 mW Dissipation factor  in still air (for info) 2.2 mW/K Response time (1)  1.7 sThermal time constant  (1) 13 Mass 0.11 g 333DDD3 D 3D Models Design Tools Models Related Documents Available ELECTRICAL DATA AND ORDERING INFORMATION R25 () R25-TOL. (± %) B25/85 (K) B25/85-TOL. (± %) CODING (see dimensions) UL APPROVED SAP MATERIAL AND ORDERING NUMBER (1) II I Y / N RoHS COMPLIANT WITH EXEMPTION (2) RoHS COMPLIANT 2000 1, 2, 3, 5 3528 0.5 Orange Orange Y 202*B0 202*B0A 2700 1, 2, 3, 5 3977 0.75 Red Red Y 272*B0 272*B0A 4700 1, 2, 3, 5 3977 0.75 Green Green Y 472*B0 472*B0A 5000 1, 2, 3, 5 3977 0.75 Black White Y 502*B0 502*B0A 10 000 1, 2, 3, 5 3977 0.75 Blue Blue Y 103*B0 103*B0A 12 000 1, 2, 3, 5 3740 2 Yellow Yellow Y 123*B0 123*B0A 22 000 1, 2, 3, 5 3740 2 White White Y 223*B0 223*B0A 47 000 1, 2, 3, 5 4090 1.5 Black Black Y 473*B0 473*B0A 68 000 1, 2, 3, 5 4190 1.5 Grey Grey Y 683*B0 683*B0A 100 000 1, 2, 3, 5 4190 1.5 Brown Brown Y 104*B0 104*B0A 470 000 1, 2, 3, 5 4570 1.5 Violet Violet N 474*B0 474*B0A

www.vishay.com Vishay BCcomponents Revision: 18-Sep-2020 2 Document Number: 29048 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DERATING Power derating curve Note

  • Zero power is considered as measuring power max. 1 % of max. power LONG TERM STABILITY AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 °C) TYPICAL R

25 STABILITY

Typical curves valid for 2.2 k to 10 k TYPICAL ROOM TEMPERATURE STABILITY Typical curves valid for 2.2 k to 10 k DIMENSIONS in millimeters B max. T max. H 1 H2 max. L d F I II I II L TB d F 0 55 0 5158 04 - Tamb (°C) 100 P (%) 0.4 0.2 4103102 (%) Test Duration (h) Ave. Min. Max. -0.2 R R 0.05 -0.05 -0.1 104103102 Test Duration (h) (K) Ave. Min. Max.

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED