4710 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

3M™ Novec™ 4710 Insulating Gas 3M Science. Applied to Life.™ Product Description Not for specification purposes. All values @ 77°F unless otherwise specified Composition of 3M™ Novec™ 4710 Insulating Gas Chemical Formula (CF3)2CFCN 2,3,3,3-tetrafluoro-2-(trifluoromethyl)-propanenitrile 99.3 mole %, minimum Typical Physical Properties Not for specification purposes. All values @ 77°F unless otherwise specified 3M™ Novec™ 4710 Insulating Gas Molecular Weight (g/mol) 195 Flash Point (°F) Non-flammable Boiling Point (°F) 23.5 Freezing Point (°F) -180 Critical Temperature (°F) 235 Critical Pressure (psia) 363 Gas Density at 14.5 psia (lb/ft3) 0.49 Vapor Pressure (psia) 36.5 Dielectric Strength at 14.5 psia, disk electrodes, 0.1 in gap (kV) 27.5 Introduction 3M™ Novec™ 4710 Insulating Gas is a sustainable alternative to sulfur hexafluoride (SF6) for electrical equipment insulation and arc quenching applications. It offers excellent dielectric properties, a wide range of operating temperatures and significant reductions in environmental impacts compared to SF6. Novec 4710 gas is non- flammable and has a wide safety margin for workers when used as designed for intended applications. This SF 6 alternative also has important environmental properties such as low global warming potential (GWP) when mixed with inert gases and zero ozone depletion potential (ODP). Novec 4710 gas in pure form has a relative dielectric strength two times greater than SF 6 at a given pressure.

  • Excellent dielectric properties for medium and high voltage applications
  • Wide range of operating temperatures and environments
  • When used in a gas mixture, the greenhouse gas (GHG) impact can be reduced by up to 99% compared with SF6
  • Non-flammable
  • Non-ozone depleting
  • Wide safety margin for workers when used as designed for intended applications
  • Compatible with a wide range of equipment components Vapor Pressure (psia) Temperature (ºF) -40 100 120 140 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Vapor Pressure of Novec 4710 Insulating Gas compared to SF 6 Not for specification purposes. All values @ 77°F unless otherwise specified. Novec 4710 gas SF6 Vapor Pressure of Novec 4710 Insulating Gas compared to SF₆ Not for specification purposes. All values @ 77°F unless otherwise specified Dielectric Breakdown Voltage of Novec 4710 Gas/CO₂ Mixtures compared to SF ₆ (Uniform field using parallel disk electrodes with 0.1 inch gap) Not for specification purposes. All values @ 77°F unless otherwise specified. Dielectric Breakdown Voltage (kV) Pressure (psia) Novec 4710 gas 0 20 40 60 80 100 120 140 160 SF₆ 20 mole% Novec 4710 gas in CO 2 15 mole% Novec 4710 gas in CO 2 10 mole% Novec 4710 gas in CO 2 5 mole% Novec 4710 gas in CO 2 CO2 Dielectric Breakdown Voltage: Mixtures of Novec 4710 Gas in CO2 (Uniform field using parallel disk electrodes with 0.1 inch gap) Not for specification purposes. All values @ 77°F unless otherwise specified
  • Versatile insulating gas for medium and high voltage applications including gas insulated lines, gas insulated switchgear and circuit breakers
  • Mix with inert gases for electric power industry

applications

  • Wide range of applications Safety and Handling Before using this product, please read the current Safety Data Sheet (available at 3M.com/SDS or through your 3M sales or technical service representative) and the precautionary statement on the product package and labels. Follow all applicable precautions and directions. Environmental Properties 3M™ Novec™ 4710 Insulating Gas SF6 Atmospheric Lifetime (years) 30 3,200 Global Warming Potential (100-yr ITH, IPCC 2013 method) 2,100 23,500 Ozone Depletion Potential (CFC-11 = 1) 0 0 Dielectric Breakdown Voltage (kV) Pressure (psia) 0 5 10 15 20 25 Dielectric Breakdown Voltage Compared to SF 6 (Uniform field using parallel disk electrodes with 0.1 inch gap) Not for specification purposes. All values @ 77°F unless otherwise specified. Novec 4710 gas SF₆ Dielectric Breakdown Voltage of Novec 4710 Gas Compared to SF₆ (Uniform field using parallel disk electrodes with 0.1 inch gap) Not for specification purposes. All values @ 77°F unless otherwise specified

Electronics Materials Solutions Division 3M Center, Building 224-3N-11 St. Paul, MN 55144-1000 USA Web www.3M.com/novec Phone 1-800-810-8513 3M and Novec are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates. The 3M™ Novec™ Brand Family 3M™ Novec™ Engineered Fluids ■ 3M™ Novec™ Aerosol Cleaners ■ 3M™ Novec™ 1230 Fire Protection Fluid ■ 3M™ Novec™ Electronic Grade Coatings ■ 3M™ Novec™ Electronic Surfactants ■ 3M™ Novec™ Insulating Gases The Novec brand is the hallmark for a variety of proprietary 3M products. Although each has its own unique formula and performance properties, all Novec products are designed in common to address the need for smart, safe and sustainable solutions in industry-specific applications. These include precision and electronics cleaning, heat transfer, fire protection, protective coatings, immersion cooling, advanced insulation media replacement solutions and several specialty chemical applications. Safety Data Sheet: Consult Safety Data Sheet before use. Regulatory: For regulatory information about this product, contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M’s control and uniquely within user’s control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Please recycle. Printed in USA. ©3M 2017. All rights reserved. Issued: 5/17 12400HB 60-5002-0728-1 Materials Compatibility In practice, Novec 4710 gas differs somewhat in materials compared to SF6. While the product is compatible with most common metals, it can be affected by some of the components found in lubricating greases and the elastomers used in gaskets and o-rings. Many materials have been found to be compatible with the product. However, material compatibility is best evaluated using the specific materials of construction being considered for contact with the Novec 4710 gas. 3M research scientists are available to assist with material compatibility evaluations. Contact your local 3M sales representative for additional information. Regulatory Status Novec 4710 gas is a single constituent product and has been REACH registered (Annex VII) in Europe and TSCI registered in Taiwan. It is currently under TSCA research and development status in the United States (pre-manufacture notice (PMN) in progress). It has been approved for low volumes in Korea. Registration and notification are in progress in other regions and countries. Contact your local 3M sales representative for additional information.