4685715 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■For C-groove cylinders without mounting accessories ■Optional accessories for mounting on other cylindrical housings. ■One-hand mounting possible ■Stable mounting ■Magneto-resistive sensor ■DC 3-wire, 11…30 VDC ■NO contact, PNP output ■Pigtail with M8 × 1 male connector Wiring diagram Functional principle Magnetic field sensors are activated by magnetic fields and are used, in particular, for the detection of the piston position in pneumatic cylinders. As magnetic fields can permeate non- magnetizable metals, they detect a permanent magnet attached to the piston through the aluminium cylinder wall.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 BIM-UNR-AP6X-0.6-PSG3M W/M | 11/07/2023 15-32 | technical changes reserved Technical data Tightening torque fixing screw 0.2 Nm Electrical connection Cable with connector, M8 × 1 Cable quality Ø 2 mm, Gray, Lif9Y-11Y, PUR, 0.6 m Core cross-section 3 x 0.08 mm Litz wire 40 x0.05 mm Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 Mounting on the following profiles Cylindrical design F Switching state LED, Yellow Included in delivery cable clip
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 BIM-UNR-AP6X-0.6-PSG3M W/M | 11/07/2023 15-32 | technical changes reserved Mounting instructions Mounting instructions/Description The sensor is mounted in the groove from above. Mount the sensors as follows using the patented wing screw: The wing screw features a left-hand female thread. Two small plastic lips keep the screw in position, ready-to-install. Turn the screw clockwise. The screw moves out of the thread and hits the upper grooves with the wings. The sensor is thus pressed down and locked. Use a 1.5 mm Allen key to fasten the screw with a quarter turn. A fixing torque of 0.2 Nm is sufficient for safe mounting without damaging the cylinder. Cable clips are included in the scope of delivery. They enable smooth cable routing in the groove. Mounting accessories for other cylinder sizes have to be ordered separately. Accessories KLR2-UNR 100000596 Mounting bracket for mounting magnetic field sensors on round cylinders ASB-4 6965104 Clip collar for mounting brackets for magnetic field sensors on round cylinders; cylinder diameter: 28… 39 mm; other lengths are available under designations ASB-1 to ASB-9