465805000

465805000 CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A TP Series Tiny Pushbutton Switches Features/Benefits

• Subminiature size—capable of switching 1 AMP
• Vertical & right angle terminations
• PC & panel mount models
• Snap-in front panel mounting available
• Epoxy terminal seal-compatible with bottom wash cleaning
• RoHS compliant models available Typical Applications
• Telecommunications and networking equipment
• Computers and peripherals
• Instrumentation and controls Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 1 AMP @ 120 V AC or 28 V DC. See page A-19 for additional ratings. ELECTRICAL LIFE: TP11, TP21 MODELS: 60,000 make-and-break cycles at full load. TP12 MODELS: 30,000 cycles. CONTACT RESISTANCE: Below 20 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with Q, B, P , R or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Glass filled nylon 4/6 or 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0). PLUNGER: Thermoplastic polyester (UL 94V-0). CAP & FRAME: Nylon, black standard. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page A-19 for additional contact materials. CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page A-19 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to soldering and cleaning in Technical Data Chapter HARDWARE: Nut & Locking Ring: Brass nickel plated. Lockwasher: Steel, nickel plated. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-16 thru A-20. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function TP11 SPST Off-Mom. TP12 SPDT On-Mom. TP21 DPST Off-Mom. Actuator or Bushing SH .155" high plunger, threaded, .220" high bushing, flat SH8 .155" high plunger, unthreaded, .220" high bushing, round SH9 .155" high plunger, unthreaded, .220" high bushing, flat J81 Snap-in with frame LT .215" high plunger, threaded, .310" high bushing, flat LT9 .215" high plunger, unthreaded, .310" high bushing, flat MS9 .130" high plunger, .020" high bushing, round Terminations A Right angle, PC thru-hole C PC Thru-hole Z Solder lug AV Vertical right angle, PC thru-hole V3 Vertical mount, v-bracket W Wire wrap Cap Color

2 Black

1 White

P Gold, matte-tin Q Silver G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Models Available

Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection TP Series Tiny Pushbutton Switches SWITCH FUNCTION PANEL MOUNTING ACTUATOR—SNAP-IN FRONT MOUNT J81 SNAP-IN WITH FRAME DPST 1-3,4-6OPENMOM.OFFTP21DP SPST SPDT 1-3 2-3 OPEN 2-1 MOM. MOM. OFF ON TP11 TP12 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 SWITCH FUNCTION POS. 1 POS. 2 MODEL NO. NO. POLES DPST SPDT Part number shown: TP21SHZQE Terminal Nos. For Reference Only Terminal Nos. For Reference Only Omit terminal 2 for TP11 models. Part number shown: TP12SHZQE MOM. = Momentary All models with all options when ordered with G, Q or R contact material. C&K marking on opposite side C&K marking on opposite side NONE No Frame Color (J80 option) FRAME COLOR OPTION CODE Cap and Frame Finish: matte. Other colors available, consult Customer Service Center. NOTE: Available with Z, C, or W terminations. NOTE: Caps & frames available separately, see page A-20. ACTUATOR OR BUSHING CAP COLOR FRAME COLOR

Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection TP Series Tiny Pushbutton Switches TERMINATIONS PANEL MOUNTING 10-48 BUSHING 1/4 IN. BUSHING Without locking ring With standard locking ring Without locking ring With standard locking ring SP DP PC MOUNTING Omit center holes for TP1 1 models SP DPSP DP C PC THRU-HOLE W WIRE WRAPZ SOLDER LUG LT .215" HIGH PLUNGER, .310" HIGH BUSHING, THREADED LT9 .215" HIGH PLUNGER, .310" HIGH BUSHING, UNTHREADED MS9 .130" HIGH PLUNGER SH8 .155" HIGH PLUNGER, .220" HIGH BUSHING, UNTHREADED SH9 .155" HIGH PLUNGER, .220" HIGH BUSHING, UNTHREADED, FLAT SH .155" HIGH PLUNGER, .220" HIGH BUSHING, THREADED, FLAT Standard with Z, C, W terminations. Standard with A, AV, V3 terminations. Not available with Z terminations. Not available with MS9 bushing or P or R contact material. † Subtract .016 (0,41) for models with A, AV or V3 terminations. NOTE: Caps available for plunger options, see page A-20. NOTE: One mounting nut, locking ring and lockwasher supplied standard with 10-48 threaded bushings (two nuts with 1/4-40 bushings). Optional mounting nut and locking ring styles and finishes available separately , see section “Technical Data and Additional Hardware”.

Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection TP Series Tiny Pushbutton Switches TERMINATIONS PC MOUNTING TP11 Models: omit terminal 2. PC MOUNTING TP11 Models: omit hole 2. PC MOUNTING TP11 Models: omit terminal 2. PC MOUNTING TP11 Models: omit hole 2. AV VERTICAL RIGHT ANGLE, PC THRU-HOLE AV VERTICAL RIGHT ANGLE, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE NOTE: Terminal bend radii and lead-in manufacturing option. NOTE: Terminal bend radii and lead-in manufacturing option. TP12SH9ABE SPDT TP21SH9ABE DPST TP12SH9AVBE SPDT TP21SH9AVBE DPST

Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection TP Series Tiny Pushbutton Switches TERMINATIONS CONTACT MATERIAL SEAL PC MOUNTING TP11 Models: omit terminal 2. PC MOUNTING TP11 Models: omit hole 2. E EPOXY SEAL V3 VERTICAL MOUNT, V-BRACKET V3 VERTICAL MOUNT, V-BRACKET TP12SH9V3BE SPDT TP21SH9V3BE DPST * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.

3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with P , R, Q, B or G contact material are RoHS compliant. All models with all options when ordered with R, G, or Q contact material. B contact material standard with A, AV, V3 & W terminations. Q contact material standard with C & Z terminations P, R contact materials not available with Z terminations. OPTION CODE CONTACT MATERIAL TERMINAL PLATING RATINGS SILVER 5 GOLD 1 SILVER 4,5 GOLD OVER SILVER 2,3 GOLD 3 MATTE-TIN 6 GOLD 1 MATTE-TIN 6 LOW LEVEL/DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC OR DC MAX. 1 AMP @ 120 V AC OR 28 V DC. 0.4 VA MAX @ 20 V AC OR DC MAX. OR 1 AMP @ 120 V AC OR 28 V DC. B P Q G R

Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on TP Series Tiny Pushbutton Switches AVAILABLE HARDWARE .495 ± .505 (12,57 ± 12,83) .595 ± .605 (15,11 ± 15,37) .005 R. (0,13) MAX. TYP. .495 ± .505 (12,57 ± 12,83) .620 ± .625 (15,75 ± 15,88) .005 R. (0,13) MAX. TYP. PANEL MOUNTING For part numbers 432502263, 432602263 For part numbers 432702263, 432802263 .250 .120 .310 R.015.090 .065 ±.005 R.012 MAX. DRAFT 1.000° ( .301 ) 6X 45 ° X .010 CHAMFER OR .010 R. LEAD IN TUNNEL GATE AS CLOSE AS POSSIBLE TO THIS SURFACE. CAVITY ID P TYPICAL APPLICATION Cap, .100" DIA. Plungers Panel Inserts PART NO.

508101000 WHITE

508102000 BLACK

Material: Nylon Finish: Gloss Cap, .120" DIA. Plungers PART NO.

708901000 WHITE

708902000 BLACK

Material: Nylon Finish: Gloss Cap, .120" DIA. Plungers PART NO. 891D01000 WHITE 891D02000 BLACK Material: Nylon Finish: Gloss .047" (1,19) PANEL THK. PART NO. 432502263 .062" (1,57) PANEL THK. PART NO. 432602263 .090" (2,29) PANEL THK. PART NO. 432702263 .125" (3,18) PANEL THK. PART NO.

432802263 BLACK

PART NO. 894902000 BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.

476602000 BLACK

Cap, J81 option only PART NO.

484601000 WHITE

484602000 BLACK

Material: Nylon Finish: Gloss PART NO.

798201000 WHITE

798202263 BLACK

Material: Nylon Finish: Matte Cap, .100" DIA. Plungers (Recommended for S9 plunger) PART NO.

538701000 WHITE

538702000 BLACK

Material: Nylon Finish: Gloss Cap, .100" DIA. Plungers PART NO.

465801000 WHITE

465802000 BLACK

Material: Nylon Finish: Gloss NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”. Other cap colors available, consult Customer Service Center. Frames snap into panel opening and ar e independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. Third Angle Projection

Click to View Pricing, Inventory, Delivery & Lifecycle Information: C&K Components: TP11SHZBE TP12SH9AQE TP11SH8ABE TP11SH8CBE TP11SHZQE TP11SH9ABE TP11SH9CBE TP11SH9AVBE TP11SH8CQE TP21SHZQE TP11LTZQE TP12SH8AVQE TP12SH8AQE TP12SH9AVBE TP12SH8ABE TP12SH8AVBE TP12SHZQE TP12SH9ABE TP21SH8V3QE 465801000 432702263 432602263 465805000 432802263 465803000 TP11LTAVQE TP11J81ZBE12 TP11J81ZBE22 TP11J81ZQE22 TP11LT9ABE TP11LTAQE TP11LTAVBE TP11LTCBE TP11LTCQE TP11LTZBE TP11MS9ABE TP11MS9CBE TP11MS9V3BE TP11SH8AGE TP11SH8AQE TP11SH8AVBE TP11SH8V3QE TP11SH9V3BE TP11SHABE TP11SHCBE TP11SHCQE TP12LT9ABE TP12MS9ABE TP12SH8AGE TP12SH8CQE TP12SH9CBE TP12SH9V3BE TP12SHCQE TP12SHZBE TP21MS9ABE TP21SH8ABE TP21SH9ABE TP21SH9CBE TP21SHZBE TP12SHCBE