4568096 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■Smooth barrel, chrome-plated brass ■Ø 12.7 mm ■Housing, GD-Zn, chromated ■Admissible pressure static/dynamic 200/100 bar ■Magnetic-resistant (insensitive to magnetic DC and AC fields) ■DC 3-wire, 10…65 VDC ■NO contact, NPN output ■M12 x 1 male connector Wiring diagram Functional principle Inductive sensors detect metal objects contactless and wear-free. For this purpose they use a high-frequency electromagnetic AC field that interacts with the target. The sensors hosting a ferrite core coil generate the AC field through an LC resonant circuit.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 BI2-CRS524-AN4X2-H1141/S34 | 11/07/2023 15-18 | technical changes reserved Technical data Wire breakage/Reverse polarity protection yes / Complete Output function 3-wire, NO contact, NPN Switching frequency 0.03 kHz Mechanical data Design Smooth barrel, 12.7 mm Probe length 52.4 mm, probe length x Housing material Metal, 1.4305 (AISI 303) Active area material Plastic, PA12-GF30 Connector housing metal, GdZn, chromated Tightening torque fixing screw 7.3 Nm Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 Power-on indication LED, Green Switching state LED, Yellow Included in delivery 2 x socket head screw 1/4"-20 NPT, 5/8" long Pressure-resistant inductive sensors withstand high pressures which makes them perfectly suited for position control in hydraulic cylinders. Mounting instructions Mounting instructions/Description Distance D 2 x B Distance W 3 x Sn Distance T 3 x B Distance S 1.5 x B Distance G 6 x Sn Diameter active area B Ø 12.7 mm The mounting receptacle and the O-ring supplied with the sensor are approved for high static and dynamic pressure. To ensure that the application is pressure-resistant, the mounting surface must also be designed accordingly. Ensure that the mounting surface is dry and free of dust during installation. Please also consider that oil can be displaced from the hydraulic system when the sensor probe is introduced, in which case the mounting surface will be moistened. Should this occur, a proper seal will not be established. Recommended clearances:
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 BI2-CRS524-AN4X2-H1141/S34 | 11/07/2023 15-18 | technical changes reserved 0.64…1.19 mm to the hydraulic cylinder end position buffers being detected to allow for tolerances and wear. >2.8 mm to the hydraulic cylinder piston rod to ensure that the sensor output switches off.