4539 ADAFRUIT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Half-Size Breadboard with Mounting Holes PRODUCT ID: 4539 This cute 3.2 ″ × 2.1″ (82 × 53mm) solderless half-size breadboard has four bus lines and 30 rows of pins, our favorite size of solderless breadboard for projects. You get a whoppin' 400 tie points ! Plug in a Feather or Metro Mini with the rest for sensors or buttons or even a little display. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm). You can also cut these in half with a saw to create 2 tiny breadboards, or "snap" these breadboards together ei ther way to make longer and/or wider breadboards. The board also has an adhesive backing and 8 mounting holes for M2 or #2 screws on a 1 cm pitch. This makes it super easy to mount the breadboard to a chassis for your next robot friend! (Just be sure to grab some M2 standoffs and/or screws) Note that you'll need an awl/screwdriver/tweezers to pop a hole thru the thin foam backing.
Dimensions: Weight: 36g https://www.adafruit.com/product/4539/4‐7‐20