4515DO-DS3BK005DPL TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
/// MS4515DO 08/2018 Page 1
FEATURES
Inches H2O Pressure Ranges PCB Mountable Digital Output Barbed Pressure Ports
APPLICATIONS
Blocked Filter Detection Altitude and Airspeed Measurements Medical Instruments Fire Suppression System Panel Meter Air Movement/Environmental Controls Pneumatic Controls MS4515DO SPECIFICATIONS PCB Mounted Digital Output Transducer Combination Temperature and Pressure Pressure Ranges from 2 to 30 inches H2O I2C or SPI Protocol Differential & Gage Temperature Compensated 3.3 or 5.0 VDC Supply Voltage Low Power Option Available (standby < 1µA) The MS4515DO is a small, ceramic based, PCB mounted pressure transducer from TE Connectivity. The transducer is built using the latest CMOS sensor conditioning circuitry to create a low cost, high performance digital output pressure (14bit) and temperature (11bit) transducer designed to meet the strictest requirements from OEM customers. The MS4515DO is fully calibrated and temperature compensated with a total error band (TEB) of less than 1.0% over the compensated range. The sensor operates from single supply of either 3.3 or 5.0VDC and requires a single external component for proper operation. The rugged ceramic transducer is available in side port, top port, and manifold mount and can measure gage or differential pressure from 2 to 30 inches H2O. The 1/8” barbed pressure ports mate securely with 3/32” ID tubing.
/// MS4515DO 08/2018 Page 2 STANDARD RANGES (INCHES H2O) Range Gage Differential Option Availability
2 DS, SS, TP, MM -L
4 DS, SS, TP, MM DS, SS, TP, MM -L
5 DS, SS, TP, MM DS, SS, TP, MM -L
10 DS, SS, TP, MM DS, SS, TP, MM -F, -L, -M
20 DS, SS, TP, MM DS, SS, TP, MM -F, -L, -M
30 DS, SS, TP, MM DS, SS, TP, MM -F, -L, -M
See Package Configurations: DS= Dual Side Port, SS= Single Side Port, TP= Top Port, MM= Manifold Mount Only I2C Protocol is Available on “L” type Pin Styles; Reference Ordering Information for Details Pin Style “L” is only available SS and MM port types. Pin Style “C” is only available SS, TP and MM port types. BLOCK DIAGRAM
/// MS4515DO 08/2018 Page 3 ABSOLUTE MAXIMUM RATINGS Parameter Conditions Min Max Unit Notes Supply Voltage TA = 25 °C 2.7 5.5 V Output Current TA = 25°C 3 mA Storage Temperature -40 +125 °C Humidity TA = 25°C 95 %RH Non Condensing Overpressure TA = 25 °C, both Ports Not to Exceed 300 psi Burst Pressure TA = 25 °C, Port 1 psi See Table 1 ESD HBM -4 +4 kV EN 61000-4-2 Solder Temperature 250°C, 5 sec max. TABLE 1: BURST PRESSURE BY RANGE AND PACKAGE STYLE Style Port 002 004 005 010 020 030 Unit DS,MM Port 1 10 10 10 10 10 20 PSI Port 2 10 10 10 10 10 20 PSI SS,TP Port 1 10 10 10 10 20 PSI ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Mechanical Shock Mil Spec 202F, Method 213B, Condition C, 3 Drops Mechanical Vibration Mil Spec 202F, Method 214A, Condition 1E, 1Hr Each Axis Thermal Shock 100 Cycles over Storage Temperature, 30 minute dwell Life 1 Million FS Cycles MTTF >10Yrs, 70 ºC, 1.188 Million Pressure Cycles, 120%FS Pressure
/// MS4515DO 08/2018 Page 4 PERFORMANCE SPECIFICATIONS Supply Voltage1: 5.0V or 3.3 VDC Reference Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Output 51E 3AE0 Count Hex 1,2,3 1EB 3EB Span 31EA 3333 347A %Span 1,2,3 3852 3998 3AE0 Pressure Accuracy -0.25 0.25 %Span 2 Total Error Band (TEB) -1.0 1.0 %Span 3,7 TEB (4inH20 and Below) -2.0 2.0 %Span 3,7 Temperature Accuracy 1.5 ºC 4 Supply Current 3 mA 7 Load Resistance (RL) 10 kΩ Long Term stability (Offset & Span) ±0.5 %Span Compensated Temperature 0 +60 ºC 5 Operating Temperature -10 +85 ºC Output Pressure Resolution 14 bits Output Temperature Resolution 8 11 bits Update Time 0.5 ms 6 Start Time to Data Ready 8.4 ms 6 Weight 3 grams Media Non-Corrosive Dry Gases Compatible with Ceramic, Silicon, Borosilicate Glass, RTV, Gold, Aluminum and Epoxy. See “Wetted Material by Port Designation” chart below. Notes 1. Proper operation requires an external capacitor placed as shown in Connection Diagram. Output is not ratiometric to supply voltage. 2. The maximum deviation from a best fit straight line (BFSL) fitt ed to the output measured over the pressure range at 25C. Includes all errors due to pressure non linearity, hysteresis, and non-repeatability. 3. Total pressure error band includes all accuracy errors, the rmal errors over the compensated temperature range and span and offset calibration tolerances. For ideal sensor output with respect to input pressure and temperature, reference Transfer Function charts below. TEB values are valid only at the calibrated supply voltage. 4. The deviation from a best fit straight line (BFSL) fitted to the output measured over the compensated temperature range. 5. For errors beyond the compensated temperature range, see Extended Temperature Multiplier chart below. 6. Start time to data ready is the time to get valid data after POR (power on reset). The time to get subsequent valid data is then specified by the update time specification. 7. This product can be configured for custom OEM requirements , contact factory for lower power consumption or higher accuracy. CONNECTION DIAGRAM Notes 1. Place 100nF capacitor between Supply and GND to within 2 c m of sensor.
/// MS4515DO 08/2018 Page 5 PRESSURE AND TEMPERATURE TRANSFER FUNCTION Sensor Output at Significant Percentages % of Count Output Type A (inH20) Output Type B (inH20) Digital Counts (decimal) Digital Counts (hex)
0 PMIN-(PMAX-PMIN)*10/80 PMIN-(PMAX-PMIN)*5/90 0 0X0000
5 PMIN 819 0X0333
10 PMIN 1638 0X0666
90 PMAX 14746 0X399A
95 PMAX 15563 0X3CCB
100 PMAX+(PMAX-PMIN)*10/80 PMAX+(PMAX-PMIN)*5/90 16383 0X3FFF
Temperature Output vs Counts OUTPUT (°C) Digital Count (decimal) Digital Counts (hex) -50 0 0X0000 0 511 0X01FF 10 614 0X0266 25 767 0X02FF 50 1023 0X03FF 85 1381 0X0565 150 2047 0X07FF
/// MS4515DO 08/2018 Page 6 EXTENDED TEMPERATURE MULTIPLIER CHART PACKAGE, PINOUT & PRESSURE TYPE CONFIGURATION 0.0 0.5 1.5 -10 2.0 0 10 20 30 40 50 60 80 70 90 1.0 2.5
/// MS4515DO 08/2018 Page 7 Pin Name Pin Function GND 1 Ground SUPPLY 2 Positive Supply Voltage SDA MISO 3 I2C Data SPI Data SCL SCLK 4 I2C Clock SPI Clock INT SS 5 I2C Interrupt SPI Chip Select 6-8 No Connection INT is not available for Pin Style “L” models Pressure Type Pmin Pmax Description Differential/ Bidirectional -Prange +Prange Output is proportional to the difference between Port 1 and Port 2. Output swings positive when Port 1> Port 2. Output is 50% of total counts when Port 1=Port 2 Gauge 0psiG +Prange Output is proportional to the difference between 0psiG (Pmin) and Port 1. Output swings positive when Port 1> Port 2. Prange is equal to the maximum full scale pressure specified in the ordering information. Standard Range (inH2O) by port style WETTED MATERIAL BY PORT DESIGNATION Material Style Port Ceramic Silicon Borosilicate Glass RTV Gold Aluminum Epoxy DS, MM Port 1 X X X X X Port 2 X X X X X X X SS, TP, SM Port 1 X X X X X X X "X” Indicates Wetted Material
/// MS4515DO 08/2018 Page 8 I2C INTERFACE I2C Interface Parameters Parameters Symbol Min Typ Max Units SCLK Clock Frequency FSCL 100 400 kHz Start Condition hold time relative to SCL edge tHDSTA 0.1 µs Minimum SCL clock low width 1 tLOW 0.6 µs Minimum SCL clock high width 1 tHIGH 0.6 µs Start Condition Setup time relative to SCL edge tSUSTA 0.1 µs Data hold time on SDA relative to SCL edge tHDDAT 0 µs Data setup time on SDA relative to SCL edge tSUDAT 0.1 µs Stop condition setup time on SCL tSUSTO 0.1 µs Bus free time between stop and start condition tBUS 2 µs 1 combined low and high widths must equal or exceed minimum SCL period
/// MS4515DO 08/2018 Page 9 SPI INTERFACE SPI Interface Parameters Parameters Symbol Min Typ Max Units SCLK Clock Frequency FSCL 50 800 kHz SS Drop to First clock edge tHDSS 2.5 µs Minimum SCL clock low width @1 tLOW 0.6 µs Minimum SCL clock high width @1 tHIGH 0.6 µs Clock Edge to data transition tCLKD 0 0.1 µs Rise of SS relative to last clock edge tSUSS 0.1 µs Bus free time rise and fall of SS tBUS 2 µs @1 combined low and high widths must equal or exceed minimum SCLK period
/// MS4515DO 08/2018 Page 10 DIMENSIONS Dimensions are in INCHES [mm] Model: MS4515DO-DSvoixxxyP Model: MS4515DO-DSvoixxxyS
/// MS4515DO 08/2018 Page 11 Model: MS4515DO-SSvoixxxyP Model: MS4515DO-SSvoixxxyS
/// MS4515DO 08/2018 Page 12 Model: MS4515DO-TPvoixxxyP Model: MS4515DO-TPvoixxxyS
/// MS4515DO 08/2018 Page 13 Model: MS4515DO-SSvoixxxyL Model: MS4515DO-MMvoixxxyL
/// MS4515DO 08/2018 Page 14 Model: MS4515DO-MMvoixxxyP Model: MS4515DO-MMvoixxxyS
/// MS4515DO 08/2018 Page 15 Model: MS4515DO-SSvoixxxyC Model: MS4515DO-TPvoixxxyC
/// MS4515DO 08/2018 Page 16 Model: MS4515DO-MMvoixxxyC
/// MS4515DO 08/2018 Page 17 APPLICATION NOTES Measurement Specialties offers a comprehensive selection of product support documentation. MS45xx Series Application Note Bypass Capacitor Selection Pressure Hose Recommendations PCB Layout Recommendations Interfacing to MEAS Digital Pressure Modules I 2C or SPI Protocol Description Data Fetch, Measurement Request Commands Timing Diagrams Configuration, POR and Power Consumption Standard and Low Power Configuration Power On Reset (POR) Current Consumption by Sampling Frequency AVAILABLE OPTIONS Gel Coat (-F Option) The MS4515DO is designed for non-ionic and clean dry air applications. Select this option for added protection in high humidity or slightly corrosive environments with the application of a silicone gel elastomer to sensor and ASIC. For questions concerning media compatibility, contact the factory. Low Power (-L Option) Select this option for battery powered or handheld device applications. In this configuration, the sensor and calibration microcontroller are powered down, drawing a current of ~ 0.6uA (Vs=5.0 V DC). When the master sends a Read MR (measurement request) command (I2C or SPI); the sensor is “awaken” and begins the measurement cycle; data is then placed onto the output registers. The sensor and calibration microcontroller are powered down again, awaiting the Read DF (data fetch) command from the master.
/// MS4515DO 08/2018 Page 18
ORDERING INFORMATION
TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believe d to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligati ons shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity company Tel: +1 800-522-6752 Email: customercare.frmt@te.com EUROPE Measurement Specialties (Europe), Ltd., a TE Connectivity Company Tel: +31 73 624 6999 Email: customercare.bevx@te.com ASIA Measurement Specialties (China) Ltd., a TE Connectivity company Tel: +86 0400-820-6015 Email: customercare.shzn@te.com 4515DO – DS 3 B K 030 D P M Package Type SS Single Sideport DS Dual Sideport TP Top Port MM Manifold Mount Option Type [Blank] No Option F* Gel Coating L Low Power M* Gel Coat & Low Power Supply Voltage 3 3.3 VDC 5 5.0 VDC Pin Type P Thru Hole S J Lead L In Line C Castellation Output Type A 10% to 90% B 5% to 95% Interface Type I I2C (Addr. 0x28H) J I2C (Addr. 0x36H) K I2C (Addr. 0x46H) S SPI (Not available for ‘L’ pin Style) 0 I2C (Addr. 0x48H) : : 9 I2C (Addr. 0x51H) Pressure Type D Differential G Gauge Pressure Range [inH2O] 002 004 005 010 020 030 * Options available for pressure ranges ≥10inH2O