450T1M1R252A2A1

450T220R103B1A1 CTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

Standard – Linear,10% Audio and 10% CCW Audio Special – Consult CTS Rotational Angle Standard Construction Total Rotation: with rotary switch — 320 ° ± 5° Total Rotation: without switch or with push-pull or push-push switches — 300 ° ± 5° Vernier Adjust Construction Effective Rotation With or without switch — 300 ° (approximate) Special angle available — consult CTS Bushing Information Diameter: EIA Standard 3/8"-32 UNEF-2A thread. Standard length: 3/8 " or 1/4 " (9.53mm or 6.35mm) Special length available upon request Metric bushing available upon request All models of 450 series pot. are now RoHS compliant except 040 and 041 push-push power switches. The two models of power switches are RoHS compliant available upon request. Special: ±10% Shaft Rotational Angle VA-450 – 3700° – 10 turns1/4 5VA-450 – 2000° – 5 turns1/2 1 - 9 01/25/07 CTS Electronic Components www.ctscorp.com RoHS Compliant © 2007 CTS Corporation. All rights reserved. Information subject to change.

Electrical and Mechanical Specifications (continued) Shaft Information Molded Shafts — Length : available up to 11/2" (38.1mm) in 1/8" (3.2mm) increments Special — Some molded shaft designs available up to 2" (50.8mm). Consult CTS Diameter : Color : Metal Shafts : Aluminum standard Length : Special — Consult CTS Diameter : Special — Consult CTS Metal Tubing Shafts — Length : Special — Consult CTS Outside Diameter : Rear Extended Shafts — 265" (6.73mm) or .250"(6.35mm) Metal or molded rear extended shafts available. Typical Constructions The following is basic information on the most common CTS 15/16" (24mm) diameter composition variable resistor constructions supplied to our customers. Space limitations prohibit showing the virtually thousands of additional constructions fabri- cated to exacting customer specifications. For your special applications the CTS engineering staff is at your disposal for designing the best and most economical construction to meet your requirements. Vernier Constructions This construction is designed for fine tuning applications. It provides precision adjustments in 3700° (10 turns) or 2000° (5 turns)1/21/4 Long Life Construction This construction provides an extended life of 250,000 cycles (with a limited rotation angle) and is available with resistance ranging from 10K ohms to 5 megohms, linear taper only. Consult CTS for other tapers. Locating Lugs (Bushing Mounted Style) Standard Position : Left side with terminals facing inward Available : No lug, right lug or two lugs with terminals Standard — Round, Flatted & knurled shafts Diameter over knurl — Colors are available. Standard — Up to 3" in 1/8" increments. Standard — .250" (6.35mm) Standard — Up to 3" (76.2mm) facing inward 2 - 9 CTS Electronic Components www.ctscorp.com 01/25/07© 2007 CTS Corporation. All rights reserved. Information subject to change.

TGC SPST 6 amps @ 125 volts AC Rotary UL & CSA Recognized Actuating angle – 20˚ Actuating Torque – 7 to 17 in. oz. (504 to 1225 gf-cm) FR-GC SPST 3 amps @ 125 volts, Rotary 1 amp @ 250 volts AC UL Recognized GC SPST 5 amps @ 20 volts DC Rotary (Automotive) Actuating angle – 20˚ Actuating Torque – 7 to 17 in. oz. (504 to 1225 gf-cm) Contact Series Arrangemen t Electrical Ratin g Outline Drawing DIMENSION: mm inch POWER SWITCHES HOLES 2.39/.094x3.18/.125 SWITCH TERMINAL .515 6.7 Ø23.4 13.1 .250 6.4 .265 .921 Ø23.4 .921 .515 13.1 SWITCH TERMINAL HOLES 2.39/.094x3.18/.125 6.4 .250 6.7 .265 SWITCH TERMINAL 13.1 .515 6.4 .250 6.7 .265 Ø23.4 .921 HOLES 2.39/.094x3.18/.125 TV-023 SPST TV-5 rating Actuating angle – 20˚ Actuating Torque – 10 to 20 in. oz. (720 to 1441 gf-cm) DIMENSION: mm inch DIMENSION: mm inch Rotary UL & CSA Recognized 3 - 9 CTS Electronic Components www.ctscorp.com 01/25/07© 2007 CTS Corporation. All rights reserved. Information subject to change.

Serie s Arrangemen t Electrical Ratin g Outline Drawing POWER SWITCHES 04 0 SPST 6 amps @ 125 volts AC Push-on Push-off Pretravel 13/64”(5.2,mm) Activating Force -2 to 5 lb (0.9 to 2.3 kgf) 04 1 SPDT 6 amps @ 125 volts AC Push-off Pretravel 13/64”(5.2mm) Activating Force -2 to 5 lb (0.9 to 2.3 kgf) 05 0 SPST 3 amps @ 125 volts AC Rotary (Shallow construction switch) U L & CSA Recognized 7 1 / 2 amps @ 20 volts DC (Automotive) Actuating angle – 25˚ Actuating Torque – 2 to 15 in. oz. (144 to 1080 gf-cm) FR-027 DPST 3 amps @ 125 volts, Rotary 1 amp @ 250 volts AC U L Recognized Actuating angle – 20˚ Actuating Torque – 10 to 20 in. oz. (720 to 1441 gf-cm) DIMENSION: m m in c h SWITCH TERMINAL Ø23.6 .687 .687 1 1.9 5.6 17.5 .469 .219 Ø17.5 .930 SWITCH TERMINAL Ø23.6 .687 .687 1 1.9 5.6 17.5 .469 .219 Ø17.5 .930 Ø2.4 5.6 9.5 7.14 .281 7.14 .281 0.4 .016 0.8 .031 .375 .219 .156 4.0 .016 0.40 .094 POLE #2 POLE #1 HOLES 2.39/.094 x 3.18/.125 SWITCH TERMINAL .921 .250 .265 .515 13.1 6.7 6.4 Ø23.39 Push-on 4 - 9 CTS Electronic Component s www.ctsc o r p . c o m DIMENSION: m m in c h DIMENSION: m m in c h DIMENSION: m m in c h 01/25/07 © 2007 CTS Corporation. All rights reserved. Information subject to change.

FR-02 8 SPDT 3 amps @ 125 volts AC Rotar y U L Recognized Actuating angle – 20˚ Actuating Torque – 10 to 20 in. oz. (720 to 1441 gf-cm) TV-02 0 DPST Pole #1, TV-1 rating Rotar y UL & CSA Recognized Actuating angle – 20˚ Actuating Torque – 10 to 18 in. oz. (720 to 1297 gf-cm) Contact Serie s Arrangemen t Electrical Ratin g Outline Drawing TV-02 1 SPDT TV-4 rating Rotar y U L Recognized Actuating angle – 20˚ Actuating Torque – 10 to 18 in. oz. (720 to 1297 gf-cm) FR- K SPST 3 amps @ 125 volts AC Pull-o n UL & CSA Recognized Push-off Pretravel - 5 / 32” (3.97mm) Actuating force - 7 to 16 oz. - Single section control (200 to 1000 gf) 7 to 20 oz. - Tandem control (200 to 1250 gf) DIMENSION: mm in c h POWER SWITCHES SWITCH TERMINAL 13.1 .515 6.4 .250 6.7 .265 Ø23.4 .921 HOLES 2.39/.094x3.18/.125 POLE #1 POLE #2 SWITCH TERMINAL 13.1 .515 6.4 .250 6.7 .265 Ø23.4 .921 HOLES 2.39/.094x3.18/.125 POLE #1 POLE #2 SWITCH TERMINAL 13.1 .515 6.4 .250 6.7 .265 Ø23.4 .921 HOLES 2.39/.094x3.18/.125 POLE #1 POLE #2 HOLES 2.39/.094 X 3.18/.125 SWITCH TERMINAL 6.8 10.2 20.65 16.3 9.5 .813 .641 .375 .266 .406 .328 8.33 Pole #2, TV-3 rating 125 volts AC 5 - 9 CTS Electronic Component s www.ctsc o r p . c o m DIMENSION: mm in c h DIMENSION: mm in c h DIMENSION: mm in c h 01/25/07 © 2007 CTS Corporation. All rights reserved. Information subject to change.

DIMENSION: m m i n c h DIMENSION: m m i n c h MTG. SUR F ACE 12.7 MAX. 3/8-32NEF 0.8 .031 "L"± 0.4 "A"± .016 Ø23.8 .937 1 1.3 .445 .594 15.1 .781 19.8 MAX. .125±.005 3.2±0.13 .804 20.4 .438 1 1.1 CLEARANCE HOLE 10.41±0.08 .410±.003 1.57±0.08 2.08±0.08 4.16±0.08 .164±.003 .082±.003 .410±.003 10.41±0.08 1.57±0.08 .500 3/8-32 UNEF-2 A THRD. LOC. LUG 2.03 P ANE L PIERCING GEN. T OL. ±.002 ABOVE MTG. SUR F ACE 20.4 .804 Ø23.8 .937 1 1.3 .445 .080 5.97 .235 .235 5.97 4.70 .185 0.69 .027 2.08Ø (3) HOLES .082 MOUNTING SUR F ACE ±0.4 ±.016 ±0.8 ±.031 .594 X=17.48 Y=22.23 .688 .875 1.109 .875 Y=28.17 X=22.23 ±0.05 .125±.005 3.2±0.13 .438 1 1.1 T450 Metal Shaft, Bushing Mounting, Type "T" Solder Lug Terminals X450 / Y450 Metal Shaft, Bushing Mounting, Printed Circuit Type "X" Or "Y" Terminals " L " 15.1 “A” MTG. SUR F ACE 1 2 3 1 1.3 .445 Ø23.8 .937 ±0.8 ±.031 " L " ±0.4 ±.016 “A” 3/8-32 UNEF-2 A THRD. 9.9±0.4 .390±.016 .125±.005 3.2±0.13 .438 1 1.1 20.4 .804 .594 15.1 4.17±0.08 .164±.003 5.97±0.05 5.97±0.05 2.08±0.05 DIA. 3 HOLES .082±.002 CLEARANCE HOLE 1.57±0.08 .410±.003 10.41±0.08 .410±.003 2.08±0.08 .082±.003 16.15±0.05 .636±.002 DIMENSION: m m i n c h 6 - 9 CTS Electronic Compon e n t s www.c t s c o r p . c o m U450 Metal Shaft, Bushing Mounting, Printed Circuit Type "U" Termina ls 3 2 1 WIPER 1 3 CLOCKWISE CIRCUIT CCW CW 3 2 1 WIPER 1 3 CLOCKWISE CIRCUIT CCW CW WIPER 1 3 CLOCKWISE CIRCUIT CCW CW 01/25/07 © 2007 CTS Corporation. All rights reserved. Information subject to change.

DIMENSION: m m i n c h 15.1 20.4 1 1.3 Ø2.08±0.05-3HL'S 5.97±0.05 .636±.002 16.15±0.05 CLEARANCE HOLE 10.41±.008 .410±.003 1.57±0.08 5.6 "L"± 0.8 .031 .445 .220 .804 16.2 .594 .638 MAX 5.97±0.05 .082±.002 1.57±0.08 .410±.003 10.41±.008 4.16±0.08 .164±.003 2.08±0.08 .082±.003 MIN. .925 MAX. 23.5 3.96±0.05 .156±.002 .327 8.3 UPE450RE Rear Extended Metal Shaft, Twist Tab Mounting, Printed Circuit Type "U" Terminals MTG. SUR F ACE 3 2 1 1 1.3 .445 Ø23.8 .937 ±0.8 ±.031 " L " ±0.4 ±.016 “A” 3/8-32 UNEF-2 A THRD. 1 1.9±0.4 .469±.016 .125±.005 3.2±0.13 20.4 .804 .594 15.1 4.17±0.08 .164±.003 5.97±0.05 5.97±0.05 2.08±0.05 DIA. 3 HOLES .082±.002 CLEARANCE HOLE 1.57±0.08 .410±.003 10.41±0.08 .410±.003 2.08±0.08 .082±.003 16.15±0.05 .636±.002 DIMENSION: m m i n c h .438 1 1.1 V450 Metal Shaft, Busing Mounting, Printed Circuit Type “V” Terminal s DIMENSION: mm i n c h 12.7 MAX. 3/8-32 UNEF-2 A THRD. 0.4 "A"± .016 Ø23.8 .937 1 1.5 .453 .500 15.09 .594 ±.031 "L" ±0.8 .125±.005 3.2±0.13 1 1.1 .438 .594 15.1 MAX. 19.8 .781 20.4 .804 VA-T450 & 5VA-T450 Metal Shaft, Bushing Mounting, Type “T” Solder Lug Terminals, V ernier Adjust MTG. SUR F ACE CLEARANCE HOLE 10.41±0.08 .410±.003 1.57±0.08 2.08±0.08 4.16±0.08 .164±.003 .082±.003 .410±.003 10.41±0.08 1.57±0.08 7 - 9 CTS Electronic Compo n e n t s www. c t s c o r p . c o m 3 2 1 WIPER 1 3 CLOCKWISE CIRCUIT CCW CW 3 2 1 WIPER 1 3 CLOCKWISE CIRCUIT CCW CW WIPER 1 3 CLOCKWISE CIRCUIT CCW CW * Consult CTS for details 01/25/07 © 2007 CTS Corporation. All rights reserved. Information subject to change.

DIMENSION: m m i n c h DIMENSION: m m i n c h .937 Ø23.8 .804 20.4 3/8-32 UNEF-2 A THRD. 15.09 .594 ±0.4 ±.016 22.2 .874 " A " ±0.8 ±.031 1 1.1 .438 3.2±0.13 .125±.005 Ø23.8 MOUNTING SUR F ACE .937 3/8-32 UNEF-2 A THRD. 5.56 .219 5.16 .203 TR A VEL "L" ±0.8 12.7 ±.031 .500 MAX 1 1.89 .468 12.7 .500 1 1.1 3.15 .438 .124 1.57 .062 0.51 .020 TC2-450 Dual-section, Concentric Metal Shafts, Bushing Mounting, Type “ T” Solder Lug Terminals 040-TMG450 Metal Shaft, Bushing Mounting with Insulated Plate, Type “T” So lder Lug Terminals,

040 Switch

“L” ±0.8 ±.031 “l” MTG. SUR F ACE 22.2 "A" 1 2 3 6 5 4 (P) (R) CLEARANCE HOLE 10.41±0.08 .410±.003 1.57±0.08 2.08±0.08 4.16±0.08 .164±.003 .082±.003 .410±.003 10.41±0.08 1.57±0.08 .937 Ø23.8 ±0.4 ±.016 .874 3/8-32 UNEF-2 A THRD. 3.2±0.13 .125±.005 .804 20.4 1 1.1 .438 15.09 .594 * More multi-section models available, consult CTS for details ±0.8 ±.031 “L” T2-450 Dual-section, Metal Shaft, Bushing Moun t ing, Type “T” Solder Lug Terminals * More multi-section with concentric models available, consult CTS for details CLEARANCE HOLE 10.41±0.08 .410±.003 1.57±0.08 2.08±0.08 4.16±0.08 .164±.003 .082±.003 .410±.003 10.41±0.08 1.57±0.08 MTG. SUR F ACE 15.09 .594 .804 20.4 (2) HOLES CLEARANCE FOR BUSHING Ø3.58 1 1.10±0.05 1 1.10±0.05 Ø.141 * Refer to Ordering Information for switch details 8 - 9 CTS Electronic Compo n e n t s www. c t s c o r p . c o m DIMENSION: m m i n c h WIPER WIPER 6 4 1 3 CLOCKWISE CIRCUIT CCW CW WIPER WIPER 6 4 1 3 CLOCKWISE CIRCUIT CCW CW 1 2 3 6 5 4 1 2 3 WIPER 1 3 CLOCKWISE CIRCUIT CCW CW 6.35 .250 01/25/07 © 2007 CTS Corporation. All rights reserved. Information subject to change.

MOUNTING STYLE “A” BUSHING LENGTH: 1/8" (3.2mm) INCREMENTS EXAMPLES: 2 – .250" (6.35mm) 3 – .375" (9.53mm) 1 – TWIST TAB MOUNT A – .250" (6.35mm) DIECAST B – .375" (9.53mm) DIECAST SHAFT LENGTH “L” FROM MOUNTING SURFACE 1/32" (0.8mm) INCREMENTS EXAMPLES: TERMINAL STYLE T – SOLDER LUG X – PC(.688"(17.5mm) HEIGHT) U – FORMED TO FRONT V – FORMED TO REAR O r dering Information T 2 20 R 1 0 3 B 1 RESIST TOL A – ±10% B – ±20% SHAFT TRIM R – ROUND F – FLATTED .375" X .156" (9.5mm X 4.0mm) K – KNURLE D S – S D SLOT .063" DEEP X .047" WIDE (1.6mm X 1.2mm) TAPER 1 – LINEAR 2 – 1 0% AUD 3 – 1 0% CCW AUD SPECIALS 1 – LEFT SIDE LUG * 4 – RIGHT SIDE LUG * 5 – NO LOCATING LUG RESISTANCE CODE EXAMPLES COD E RESISTANCE 501 500 OHMS 102 1K 252 2.5K 502 5K 103 10K 253 25K 503 50K 104 100K SWITCHE S FUNCTIO N CT S TYPE C – SPST ROTARY TGC D – DPST ROTARY 027 E – SPDT ROTARY 028 F – SPST PULL-PUSH FRK G – SPST PUSH-PUSH 040 H – SPDT PUSH-PUSH 041 K – NONE VERNI ER ADJUST 10 1/4 turns L – NONE 4 5 0 6 – BOTH SIDE LUG (.236"(6.0mm) DIA OVER KNURL 24 TEETH) Y – PC(.875"(22.2mm) HEIGHT) B – SPST ROTARY 050 (.240”-.246” Dia over knurl 24 teeth) M – .250" (6.35mm) MOLDED ME T A L SHAFT * MOLDED SHAFT ME T A L SHAFT MOLDED SHAFT A – NONE * AVAILABLE FOR MOLDED MOUNTING BUSHING * 0.014” shaft length reduced when molded mounting style applied * A vailable for non switch and rotary switche models 9 - 9 CTS Electronic Com p o n e n t s ww w . c t s c o r p . c o m 1 A DIMENSION: m m i n c h MOUNTING SURFACE 3/8-32 UNEF-2A THRD. 1 1.1 3.15 .438 .124 050-T450 Metal Shaft, Bushing Mounting, Solder Lug terminals, 050 Switch * Refer to Ordering Information for switch details WIPER 1 3 CLOCKWISE CIRCUIT CCW CW 1 1.3 1 2 3 0.4 5.6 9.5 Ø2.4 (4) 1 2 3 13.1 6.7 6.4 HOLES SWITCH TERMINAL 3.2±0.13 .125±.005 .804 20.4 15.09 .594 MOUNTING SURFACE ±0.4 ±.016 “A” ±0.8 ±.031 “L” Ø23.8 .937 .016 1.52 .060 .220 .374 .445 3/8-32 UNEF-2 A THRD. .094 (2) 12.7 .500 MAX CLEARANCE HOLE 10.41±0.08 .410±.003 1.57±0.08 2.08±0.08 4.16±0.08 .164±.003 .082±.003 .410±.003 10.41±0.08 1.57±0.08 1 1.1 .438 .804 20.4 15.09 .594 "L" ±0.8 ±.031 12.7 .500 Ø23.8 .937 Ø23.4 .921 .252 .264 .010 x .126 2.4 x 3.2 .516 TGC-TMG450 Metal Shaft, Bushing Mounting with Insulated Plate, Type “T” Solder Lug Terminals, TGC Switch WIPER 1 3 CLOCKWISE CIRCUIT CCW CW CLEARANCE HOLE 10.41±0.08 .410±.003 1.57±0.08 2.08±0.08 4.16±0.08 .164±.003 .082±.003 .410±.003 10.41±0.08 1.57±0.08 * Refer to Ordering Information for switch details DIMENSION: m m i n c h 6.35 .250 J – SPST FR-GC ROTARY VERNI ER ADJUST 5 1/2 turns 01/25/07 © 2007 CTS Corporation. All rights reserved. Information subject to change.