45010 DESCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 DATE: June 2017 © 2017 DESCO INDUSTRIES INC. Employee Owned STATFREE J™ DRAWING PM-114 STATFREE J ™ DISSIPATIVE SHOCK RESISTANT FOAM RUBBER, 0.125" (3.2MM) Specifications Standard Document Meets Requirements of: ANSI/ESD S20.20 Worksurface Electrical Properties Typical Values Test Procedures/Method Color Dissipative Layer Rtt Resistance: 1 x 106 to < 1 x 109 ohms ANSI/ESD S4.1 and ESD TR53 Rtg Resistance: 1 x 106 to < 1 x 109 ohms ANSI/ESD S4.1 and ESD TR53 Physical Properties Construction: Cellular foam rubber Thickness: 0.125" (3.2mm) ±10% Surface*: Textured surface Hardness: 45 Shore “A”, per ASTM-D412 Weight: 0.28 lbs. per square foot Density: Average - 24 lbs. per cubic foot Corner Radius: 0.75" Tensile Strength (Machine Direction) 70 PSI Tensile Strength (Cross Machine Direction) 45 PSI Tensile Strength Die “b” (Machine Direction) 20 PSI Tensile Strength Die “b” (Cross Machine Direction) 15 PSI Black Made in the United States of America STATFREE J™ DISSIPATIVE FOAM RUBBER Specifications and procedures subject to change without notice. RoHS 3, REACH, and Conflict Minerals Statement See the Desco Industries RoHS 3, REACH, and Conflict Minerals Statement: http://www.descoindustries.com/ROHS.aspx See the Desco Limited Warranty: http://desco.descoindustries.com/Limited-Warranty.aspx See the Desco Disclaimer: http://desco.descoindustries.com/Disclaimer.aspx Grounding & Cleaning If the material is used on top of an already properly grounded surface, grounding hardware may not be necessary. Where no properly grounded surface is available, grounding hardware is required to provide a path-to-ground. Rtg compliance verification measurements must be made as outlined in ESD TR53 with a surface resistance meter. See Tech Bulletin TB-7000 for Reztore ® Surface & Mat Cleaner Application Instructions. 0.125" Pebble Embossed Surface Tolerances: Width ± 0.250" Length ± 0.250" every 1 linear foot of running material. Thickness ±10% Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical, allow the material to condition for at least 4 hours before cutting to size. Always using care trim with a sharp knife or razor blade. *Color and texture may vary between lots and mills. For product listings, Click Here Limited Lifetime Warranty: Desco warrants for one year that Statfree ® matting products will be free of defects in materials and workman ship and will guarantee dissipative/ conductive mat properties for the life of the mat. Damage to matting caused by misuse of any kind, including using inappropriate cleaners is not covered by Desco Limited Warranty.