4492W

4492W 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

December, 2014 3M™ Double Coated Polyethylene Foam Tape 4492W Product Description 3M™ Double Coated Polyethylene Foam Tapes 4492W combine a conformable closed cell foam with a high strength acrylic adhesive that provides good initial tack and oers high ultimate adhesion to a wide variety of surfaces.

3M™ Double Coated Polyethylene Foam Tape 4492W Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Physical Properties Property Values Attribute Modier Thickness: Nominal 0.8 mm 31 mil Thickness Tolerance 0.6 to 1 mm 25 to 45 mil Adhesive Type 430 (Acrylic Adhesive) Adhesive Carrier Closed Cell Crosslinked Polyethylene Foam Foam Color White Foam Density 95 kg/m³ 6 lb/ft³ Liner Paper Liner Color Tan Primary Liner Thickness 0.08 mm 3 mil Typical Performance Characteristics Table continued on next page PropertyValues MethodAttributeModierDwell/CureTime Notes DwellTimeUnits TempC TempF EnvironmentalConditionSubstrateBacking Normal Tensile 415 kPa 60 lb/in² ASTM D897 Overlap Shear Strength 380 kPa 55 lb/in² ASTM D1002

3M™ Double Coated Polyethylene Foam Tape 4492W Typical Performance Characteristics (continued) PropertyValues MethodAttributeModierDwell/CureTime Notes DwellTimeUnits TempC TempF EnvironmentalConditionSubstrateBacking UV ResistanceNo apparent degradation when exposed for seven days in U.V. chamber. Cold Flex @ -20°F (-30°C) No cracking when exed around a 1/4 in (6.4 mm) mandrel. 90° Peel Adhesion 128 oz/in 14 N/cmASTM D3330 72 12 in/min (300 mm/min) hr 22C 72F 52%RHStainless Steel 2 mil PET Relative High Temperature Operating Ranges Test Condition 82 °C 180 °F Short Term (minutes, hours) 70 °C 158 °F Long Term (days, weeks) Property: Relative High Temperature Operating Ranges

3M™ Double Coated Polyethylene Foam Tape 4492W Typical Performance Characteristics (continued) Static Shear Test Condition 1000 g Room Temperature 500 g @ 49°C (120°F) 250 g @ 70°C (158°F) Property: Static ShearMethod: ASTM D3654notes: 1/2 in.² (3.23 cm²), will hold weight listted for 10,000 minutes Solvent Resistance No apparent degradation when exposed to splash testing of typical hydrocarbon solvents. (Splash testing cycle - 20 seconds submersion, 20 sec. air dry, 3 cycles) Available Sizes Property Values Notes Standard Roll Length 65.8 m 72 yd Maximum Length 160 m 175 yd Normal Slitting Tolerance ±0.8 mm ±1/32 in Handling/Application Information Application Ideas

• The foam construction makes these products ideal for many joining, mounting, gasketing, and sealing applications involving irregular surfaces. • 3M™ Double Coated Polyethylene Foam Tapes 4492 and 4496 are formulated for more demanding indoor and moderate outdoor general purpose mounting and joining applications. • Application ideas for these tapes include: – Signs, Nameplates and Plaques – Point of Purchase and other Displays – Plastic Hooks, Racks and Dispensers – Wire and Cable Clips – Appliance, Display Case and Electronic Equipment Trim Application Techniques

Table continued on next page 3M™ Double Coated Polyethylene Foam Tape 4492W Handling/Application Information (continued) Application Equipment To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality. To learn more about working with pressure-sensitive adhesives please refer to technical bulletin, Lamination Techniques for Converters of Laminating Adhesives (70-0704-1430-8). For additional dispenser information, contact your local 3M sales representative, or the toll free 3M sales assistance number at 1-800-362-3550. Storage and Shelf Life Product retains its performance and properties for 24 months from date of manufacture when stored in original cartons at 70°F (21°C) and 50% relative humidity. Trademarks 3M is a trademark of 3M Company. References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Double-Coated-Polyethylene-Foam-Tape-4492/?N=5002385+3293242406&rt=rud Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=4492W 4462W 4462B 4466W 4466B 4492W 4492B 4496W 4496B Relative High Temperature Operating Ranges (°C) Test Condition: Short Term (minutes, hours) 70 70 70 70 82 82 82 82 Relative High Temperature Operating Ranges (°C) Test Condition: Long Term (days, weeks) 49 49 49 49 70 70 70 70 Liner Color Attribute Modier: Primary White White White White Tan Tan Tan Tan Adhesive Type 745 (Rubber Adhesive) 745 (Rubber Adhesive) 745 (Rubber Adhesive) 745 (Rubber Adhesive) 430 (Acrylic Adhesive) 430 (Acrylic Adhesive) 430 (Acrylic Adhesive) 430 (Acrylic Adhesive) Adhesive Carrier Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam Foam Color White Black White Black White Black White Black

3M™ Double Coated Polyethylene Foam Tape 4492W Family Group (continued) ISO Statement Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M 4462W 4462B 4466W 4466B 4492W 4492B 4496W 4496B Liner Paper Paper Paper Paper Paper Paper Paper Paper This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.