4445R_10 API | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
MIL DASH # (Ref.) SRF MINIMUM (MHz)** DASH NUMBER* INDUCTANCE (µH) Q MINIMUM TEST FREQUENCY (MHz) DC RESISTANCE MAXIMUM (OHMS) CURRENT RATING MAXIMUM (mA) TOLERANCE SERIES 4445R 4445 Radial Toroidal Inductors Military Specification M S21423 (R ef.) M echanical C onfiguration U nits are radial leaded and encapsulated in an epoxy m olded package. Physical Parameters Inches M illim eters A 0.200 to 0230 5.08 to 5.84 B 0.190 to 0.210 4.83 to 5.33 C 0.090 to 0.110 2.29 to 2.7 9 D 0.090 to 0.110 2.29 to 2.7 9 E 1.00 M in. 25.4 M in. F 0.0185 to 0.0215 0.47 0 to 0.546 Operating Temperature –55°C to +125°C Current Rating at 90°C Ambient 35°C R ise Maximum Power Dissipation at 90°C 0.200 W Note Inductance m easured 0.25" from body. Weight Max. (Gram s) 0.5 * * Note Self R esonant Frequency (SR F) values above 250 M H z are calculated and for reference only. M arking 4445; dash num ber w ith tolerance letter; D elevan cage code (99800); date code (YYW W L). Note: An R after 4445 indicates a R oH S com ponent. Exam ple: 4445-01M 4445 -01M 99800 0828A Packaging B ulk only M ade in the U .S.A . RF Inductors 27 0 Q uaker R d., East Aurora NY 14052 • Phone 7 16-652-3600 • Fax 7 16-652-4814 • E-m ail: apisales@ delevan .com • w w w.delevan.com MS21423 (Ref.) – SERIES 4445 -01M -02M -03M -04M -05M -06M -07 M -08M -09M -10M -11M -12M -13K -14K -15K -16K -17 K -18K -19K -20K -21K -22K -23K -24K -25K 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2200 2200 2000 1800 1600 1500 1400 1300 1150 1000 900 800 7 50 7 00 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.030 0.040 0.040 0.050 0.060 0.07 0 0.080 0.100 0.120 0.150 0.200 0.250 0.300 0.350 0.400 1000 1000 1000 1000 900 800 7 50 7 00 650 600 550 500 450 400 350 320 300 280 260 240 220 200 180 160 150 150 150 150 150 100 100 100 100 100 100 100 100 7 0 7 0 7 0 7 0 ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% ± 10% 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.100 0.120 0.150 0.180 0.220 0.27 0 0.330 0.390 0.47 0 0.560 0.680 0.820 1.000 O ptional Tolerances: J = 5% H = 3% G (D ash 01-12 M in. Tolerance is ±5% ) *C om plete part # m ust include series # PLU S the dash # For surface finish inform ation, refer to w w w.delevanfinishes.com API_newlayouts_single:APIcatalog_newlayouts 8/24/10 3:42 PM Page 58