4391 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • High current capacity
  • Snap–action switching
  • Normally open or closed
  • Automatic or manual reset
  • Hermetically sealed and back–filled with nitrogen
  • SPST or SPDT
  • Capacity optional overmold Dielectric Strength 1250 VAC, rms, 60 cycles for 1 minute Vibration Resistance Standard Construction : 5–500 Hz, 3G High Vibration Construction : 5–500 Hz. 5G Hermeticity 1 X 10-5 atm cc/second maximum Weight Without overmold : 21 grams (average) With overmold : 56 grams (average)

30 VAC/DC 125 VAC 250 VAC

10 4 2 100,000 11 6 3 50,000 12 8 4 25,000 13 10 5 10,000 14 12 6 5,000 PERFORMANCE CHARACTERISTICS Contact Ratings

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. TEMPERATURE Ambient Temperature Range Operating Temperature Range Non-Overmold: -65°F to 450°F (-53.9°C to +232.2°C) Silicone Overmold: -60°F to 400°F (-51.1°C to +204.4°C) Non-Overmold: 0°F to 450°F (-17.8°C to +232.2°C) Silicone Overmold: 0°F to 400°F (-17.8°C to +204.4°C) Standard Temperature Settings Operating Temperature SPST (Single Pole / Single Throw), Standard Vibration SPDT (Single Pole / Double Throw), High Vibration Differential Tolerance Differential Tolerance °C °F ± °C ± °F °C °F ± °C ± °F -18 to 93°C (0 to 200°F) 8 15 3 5 14 25 4.4 8 -99 to 149°C (210 to 300°F) 14 25 4 7 17 30 6 10 -160 to 177°C (325 to 350°F) 25 45 7 12 25 45 7 12 -191 to 232°C * (375 to 450°F) auto reset only 33 60 8 15 14 60 8 15 Standard temperature set points are at every 5°F degrees (for example, 320°F, 325°F, 330°F). Consult Sensata Technologies if a custom operating temperature range is required. * Available in automatic reset only

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. CONFIGURATIONS Our most common configurations and options are depicted below. Other styles are also available. TYPICAL MOUNTINGS

Rev:10/05/18 www.sensata.com Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 (508)-236-3287 klixon@sensata.com AUTHORIZED DISTRIBUTORS Flame Enterprises Bob Correa, Director of Product Management +1 (240) 236-9802 bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818- 700-2905 Fax: 1-818-407-5080 Peerless Electronics Steve Gunther, National Sales Manager +1 (516) 594-3509 sgunther@peerlesselectronics. com nysales@peerlesselectronics. com | Web Tel: 1-800-285-2121 Fax: 1-800-222-8096 Europe, Middle East & Africa Flame Enterprises Bob Correa, Director of Product Management +1 (240) 236-9802 bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818- 700-2905 Fax: 1-818-407-5080 CONTACT US WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury.