DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
DESCRIPTION
GENERAL TOLERANCE Basic materialProjection Drawing.- No. c Bounce 10ms max. 14-04-14 DaF d revised MatchCode 14-07-24 AL WS-TASU 4,7x3,5 mm side push tact switch with boss design, J-Bend SMD version 4363x30458xx 4363x30458xx.dft 10-03-22 Jelisarow 5:1 System :Solid Edge V20 WE eiCan CAD Würth Elektronik eiCan .x = +/- 0,2 .xx = +/- 0,15 SIZE 11-10-28 warning text a WJ This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. 12-06-06descriptionb WJ 10-03-22 Hsue remove Contact cladding 14-10-30 DaF Scale - 5:1 P.C.B. MOUNTING PLAN SCHEMATIC4 4,0 6,0 0,7 2,7 TECHNICAL CHARACTERISTICS SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 1OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Bounce: 10ms max. MATERIAL >Cover: Stainless Steel >Stem: PA46, UL HB >Frame: PA46, UL HB, color Black >Contact: Stainless Steel with silver >Terminal: Copper alloy with silver plating >Tape: Polyimide tape SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach PACKAGING INFORMATION >Tape & Reel 2,75 O 0,75 +0,1 - 0 3,5 4,5 ±0,2 2,6 1,4 1,65 0,5 0,2 0,2O 0,6O 4,7 5,5 ±0,2 3,7 1,7 0,6 2,75 1,0 PN Force Color of Stem Life cycle 436 353 045 816 160g ± 50gf White 200.000 436 333 045 822 220g ± 50gf Black 100.000 0,25 mm ± 0,1 Stroke