433-1110-000XL DIALIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
pRobust High Flux LED Technology pIdeal for Solar and Battery Application When Used With LED Driver Provided by Others pLong Life pStandard 8” and 12” Modules pFully Sealed Module pIncandescent Appearance pAbrasion Resistant Lens Coating pEasy to Install into Existing Signal Enclosure speCifiCations pConstant current DC drive source required (provided by others) pQuick connect terminals with spade / tab adapters pColored Wire - Positive, White Wire - Negative pOperating Temperature Range: -40°C to +74°C pVibration resistant to Mil-Std-883, Test method 2007 pMoisture Resistant per MIL-STD-810F, Method 506.4 for rain and blowing rain 8” (200 mm) signal modules with no internal driver CirCuit * Measured at peak intensity point, when driven at the above specified max input drive current. Part Number Color Lens Type Min Luminous Intensity* (cd) Dominant Wavelength (nm) Max Input Drive Current (mAmps) 433-1110-000XL Red Tinted 165 625 375 433-3130-900XL Yellow Tinted 410 590 520 433-2120-000XL Green Tinted 215 500 600 433-2170-000XL Green Clear 215 500 600 12” (300 mm) signal modules with no internal driver CirCuit Part Number Color Lens Type Min Luminous Intensity* (cd) Dominant Wavelength (nm) Max Input Drive Current (mAmps) 433-1210-000XL Red Tinted 365 625 340 433-3230-900XL Yellow Tinted 910 590 520 433-2220-000XL Green Tinted 475 500 345 433-2270-000XL Green Clear 475 500 345 LED Traffic Modules for use with External Constant Current DC Drive Applications Caution: These Dialight LED traffic signal modules do not contain any internal LED Driver circuitry that would limit the current to the LEDs. These LED modules must be driven with a customer supplied constant current source . Failure to drive these LED modules from a constant current source or exceeding the drive current specification for the devices can result in catastrophic failure of the LEDs. Since LED drive current is a function of the system design, LED product warranty is assumed by the system designer / supplier. MDTS433EC001_A Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/ MDTS433EC001.pdf www.dialight.com