TMS322512ALM TDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
(1/4) inductor_commercial_power_tms322512alm_en.xml Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230410 INDUCTORS Inductors for power circuits Thin-film metal magnetic material TMS-ALM series TMS322512ALM type ■FEATURES ◯ By using metal magnetic material with high Saturation magnetic flux density the excellent DC bias characteristics needed for inductors for power circuits can be achieved. ◯ With the same product shape and terminal structure as general chip parts it has excellent mounting stability characteristics an d can also be mounted to general-purpose land patterns. ◯ By using a closed magnetic circuit structure leakage flux is minimized. ■APPLICATION ◯ Industrial equipment, HDD, SSD, DVC, DSC, smart phones, mobile display panels, portable game devices, compact power supply modules, other ■PART NUMBER CONSTRUCTION ■CHARACTERISTICS SPECIFICATION TABLE * Rated current: smaller value of either Isat or Itemp. Isat: When based on the inductance change rate (30% below the initial L value) Itemp: When based on the temperature increase (temperature increase of 40°C by self heating) Measurement equipment * Equivalent measurement equipment may be used. TMS 322512 ALM - 1R0 M T AA Series name L×W×H dimensions 3.2×2.5×1.2 mm Characteristic type Inductance (µH) Inductance tolerance Packaging style Internal code L LMeasuring frequency DC resistance Rated current* Rated voltage Part No. Isat Itemp 0.10 ±20% 1 8 3 14 16 8.0 13 20 TMS322512ALM-R10MTAA 0.15 ±20% 1 9 5 12 14 8.0 11 20 TMS322512ALM-R15MTAA 0.22 ±20% 1 11 6 10 12 7.0 9.5 20 TMS322512ALM-R22MTAA 10 ±20% 1 360 305 1.6 1.8 1.2 1.4 20 TMS322512ALM-100MTAA Measurement item Product No. Manufacturer L 4294A Keysight Technologies DC resistance Digital Milliohm Meter Rated current Isat 4285A+42841A+42842C Keysight Technologies
(2/4) inductor_commercial_power_tms322512alm_en.xml Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230410 INDUCTORS TMS322512ALM type ■L FREQUENCY CHARACTERISTICS Measurement equipment * Equivalent measurement equipment may be used. ■INDUCTANCE VS. DC BIAS CHARACTERISTICS Measurement equipment * Equivalent measurement equipment may be used. Product No. Manufacturer 4294A Keysight Technologies Product No. Manufacturer 4285A+42841A+42842C Keysight Technologies Inductance(µH) 0.01 0.1 0.1 1 10 100 Frequency(MHz) R10 R15 R22 R33 R47 R68 1R0 1R5 2R2 3R3 4R7 6R8 100 DC current(A) Inductance(µH) 0.01 0.1 100 2 4 6 8 10 12 14 16 18 R10 R15 R22 R33R47 R68 1R0 1R52R2 3R3 4R76R8 100
(3/4) inductor_commercial_power_tms322512alm_en.xml Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230410 INDUCTORS TMS322512ALM type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN ■RECOMMENDED REFLOW PROFILE ■PACKAGING STYLE □REEL DIMENSIONS □TAPE DIMENSIONS □PACKAGE QUANTITY ■TEMPERATURE RANGE, INDIVIDUAL WEIGHT * Operating temperature range includes self-temperature rise. ** The storage temperature range is for after the assembly. 2.50±0.20 3.20±0.20 1.20max. 0.8 2.0 0.8 2.5 Natural cooling 10s max. 60 to 120s Preheating 30 to 50s Soldering 230°C 230°C 250 to 260°C 180°C 150°C Time Peak Temperature Type A B K TMS322512ALM 2.8 3.5 1.4 Package quantity 2000 pcs/reel Operating temperature range * Storage temperature range ** Individual weight -40 to +125°C -40 to +125°C 0.052g 1.0 ø180±2.0 2.0±0.5 ø13±0.2 ø21±0.8 ø60min. 14.4max. Dimensions in mm 8.4 +2.0 –0.0 8.0±0.2 1.75±0.1 4.0±0.1 4.0±0.1 2.0±0.05 B A 3.5±0.1 Dimensions in mm Sprocket hole 1.5 +0.1 CavityK 160min. Taping 200min. 300min.Drawing direction
(4/4) inductor_commercial_power_tms322512alm_en.xml Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230410 INDUCTORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products REMINDERS ○The storage period is within 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 20 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. ○ Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). ○ Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder te mperature and chip temperature does not exceed 150°C. ○ Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. ○ When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. ○ Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. ○ Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. ○ Use a wrist band to discharge static electricity in your body through the grounding wire. ○ Do not expose the products to magnets or magnetic fields. ○ Do not use for a purpose outside of the contents regulated in the delivery specifications. ○The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requir ements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious d amage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications , you are kindly requested to take into consideration securi ng protection circuit/device or providing backup circuits in your equipment.