42510ESDA-TR1 EATON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
ESD suppressor four-channel
- Halogen free, lead free and RoHS compliant for global applications
- Ultra-low capacitance (0.1pF typical) ideally suited for protecting high speed data applications
- Provides ESD protection with fast response time (<1ns) allowing equipment to pass the IEC 61000-4-2 Level 4 test
- Four (4) channel array
- Zero signal distortion
- Low leakage current (<0.01µA typical) Pb HALOGEN HFFREE
Applications
- Digital video equipment
- Mobile phone
- GPS Antenna
- Bluetooth communication equipment antenna circuit
- IEEE-1394
- DVI
- HDMI Surface Mount Device Part Number Description 42510ESDA-TR1 5000 suppressors in paper tape on a 7 inch (178 mm) reel 4 2510 ESDA- TR1Part Numbering System: Four channel SIN 1 chip 2.5x1.0mm footprint size ESDA ESD Suppressor Tape and reel packaging code Design considerations
- Follow the soldering recommendations to avoid deforming product
- Do not use high temperature, high humidity or corrosive atmospheres (sulfide and chloride gas) that could damage the solderability
- Moisture Sensitivity Level (MSL) according to J-STD-020 standard: Level 2 (Floor Life 1 year under <30°C/65%RH conditions) Solderability requirement according to IPC/JEDEC J- STD-002C, Test D, Test B1
- Use Sn/Ag/Cu (96.5/3.0/0.5) or equivalent solder and activated flux #5 or equivalent. Environmental Specifications Characteristic Value Load Humidity +85 °C/90% RH with rated voltage for 1000 hrs Thermal Shock -40 °C to +85 °C, 30 minute cycle, 5 cycles Moisture Resistance Test J-STD-020 Standard: Level 2 (1 year floor life under 30 °C/65% RH conditions Operating Temperature Range -40 °C to +85 °C (-40 °F to 185 °F) Storage Temperature Range -55 °C to +125 °C (-67 °F to +257 °F) * Note, Capacitance measured with 1 Vrms Characteristic Value/Range Rated Voltage (max) 12 V Leakage Current (max @ 12Vdc) 0.01 µA Trigger Voltage (Vt) 300 V Typical Clamping Voltage (Vc) 30 V Typical Capacitance (Cp) @1MHz* 0.1 pF Typical Response Time <1 ns ESD Voltage Capability, IEC 61000-4-2 8 kV Contact Discharge Mode ESD Voltage Capability, IEC 61000-4-2 Air Discharge Mode 15 kV ESD Withstand Pulses 100 Times Minimal
1000 Eaton Boulevard
Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 4378 BU-SB10816 May 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. 42510ESDA-TR1 ESD suppressor four-channel Technical Data 4378 Effective May 2017 Soldering recommendations
- Compatible with lead and lead-free solder reflow processes
- Hand soldering - soldering tip should not directly touch part +280 °C max for 3 sec. max
- Peak reflow temperatures and durations: o IR Reflow = 260°C max for 20 sec. max o Wave Solder = 260°C max for 10 sec. max L W E T B CD Dimensions - mm CB D E L T W Recommended Pad Layout - mm GP P 1 X 1X Y 1Y Z Note: Print solder 0.01~0.015mm thick. 7RS7DSH Unit: mm AB C D E F L W Packaging-mm Supplied in tape and reel packaging, 5000 parts per seven inch (178 mm) reel per EIA Standard 481-1 Recommended IR Reflow Profile Circuit Schematic HDMI Application