420SS002M18

420AA002M08 GLENAIR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

www.glenair.com E-Mail: sales@glenair.comSeries 42 - Page 4 GLENAIR, INC.• 1211 AIR WAY• GLENDALE, CA 91201-2497• 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 CONNECTOR DESIGNATORS A-B*-C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 DIRECT COUPLING E (Table IV) F (Table IV) J (Table III) J (Table III) G (Table IV) H (Table IV)

420 F S 002 M 16 03-6

A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Cable Entry (Table V) Shell Size (Table I) Finish (Table II) B (Table I) B (Table I) 420-002 Sealtite™/Liquidtite Conduit Backshell Direct Coupling - Low Profile B (Table I) A Thread (Table I) STYLE 2 (STRAIGHT) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) Length * ** (Table V)N Wrench Flat (Table V) Sealtite/Liquidtite Conduit or Equivalent (Customer Furnished)O-Ring

www.glenair.com E-Mail: sales@glenair.comSeries 42 - Page 5 GLENAIR, INC.• 1211 AIR WAY• GLENDALE, CA 91201-2497• 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 TABLE IV: ELBOW DIMENSIONS G Max .709 (18.0) .734 (18.6) .990 (25.1) 1.090 (27.7) 1.325 (33.7) 1.827 (46.4) 2.027 (51.5) H Max 1.940 (49.3) 1.960 (49.8) 2.120 (53.8) 2.290 (58.2) 2.400 (61.0) 2.820 (71.6) 2.820 (71.6) E Max .630 (16.0) .692 (17.6) .848 (21.5) 1.036 (26.3) 1.130 (28.7) 1.317 (33.5) 1.348 (34.2) See inside back cover fold-out or pages 13 and 14 for Tables I and II. Elbow Size 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Sealtite is a trademark of Anaconda Corp. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. K DimensionConduit Size (Ref.) 1 1/4 1 1/2 Dash No. Max .504 (12.8) .642 (16.3) .840 (21.3) 1.066 (27.1) 1.410 (35.8) 1.600 (40.6) 2.045 (51.9) L Dimension Max .710 (18.0) .840 (21.3) 1.050 (26.7) 1.315 (33.4) 1.660 (42.2) 1.900 (48.3) 2.375 (60.3) M Max 1.155 (29.3) 1.282 (32.6) 1.531 (38.9) 1.781 (45.2) 2.218 (56.3) 2.468 (62.7) 3.031 (77.0) N Max Wrench Flat 1.000 (25.4) 1.125 (28.6) 1.375 (34.9) 1.625 (41.3) 2.062 (52.4) 2.312 (58.7) 2.875 (73.0) Min .484 (12.3) .622 (15.8) .820 (20.8) 1.041 (26.4) 1.380 (35.1) 1.575 (40.0) 2.020 (51.3) TABLE V: CABLE ENTRY Min .690 (17.5) .820 (20.8) 1.030 (26.2) 1.290 (32.8) 1.630 (41.4) 1.875 (47.6) 2.350 (59.7) F Max 1.870 (47.5) 1.930 (49.0) 2.130 (54.1) 2.320 (58.9) 2.470 (62.7) 2.620 (66.5) 2.710 (68.8) 420-002 Sealtite™/Liquidtite Conduit Backshell Direct Coupling - Low Profile Shell Size A-E-F J-H-L-S 1.180 (30.0) 1.180 (30.0) 1.180 (30.0) 1.180 (30.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.610 (40.9) 1.610 (40.9) 1.610 (40.9) 1.610 (40.9) D-B-G-K 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.750 (44.5) 1.750 (44.5) 2.190 (55.6) J Max - Conn. Designator TABLE III: FRONT ADAPTER C 1.735 (44.1) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6)