4130-G211-K4M1-25A

4130-G211-K4M1-20A E-T-A | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

High Performance Thermal Circuit Breaker 4130-... www.e-t-a.de2249

Description

Ordering information

Single pole high performance thermal circuit breaker, with push-to-reset tease free, trip-free snap action mechanism (R-type TO CBE to EN 60934). Designed for threadneck panel mounting and for applications with a high fault current switching requirement. Approved to CBE standard EN 60934 (IEC 60934). Motors, transformers, solenoids, battery chargers, power supplies, appliances, machinery, extra low voltage systems. 4130-... Standard current ratings and typical internal resistance values Type No. 4130 single pole thermal circuit breaker Mounting G2 M12x1, knurled nut (bulk shipped with 5 pcs plus) G4 M12x1, hex nut and knurled nut (bulk shipped with 5 pcs plus) Number of poles 1 single pole, thermally protected Actuator configuration 1 black push button Terminal design K4 terminal M6x8 screw and washer bulk shipped Characteristic curve M1 medium delay Current ratings 20... 80 A 4130 - G2 1 1 - K4 M1 - 20 A ordering example Please be informed that we have minimum ordering quantities to be observed. For further details please see: http://www.e-t-a.de/ti_e Voltage rating AC 240 V; DC 50 V Current rating range 20...80 A Typical life AC 240 V: 20...70 A 100 operations at 2 x IN, inductive 500 operations at 2 x IN, resistive DC 50 V: 20...80 A 500 operations at 2 x IN, inductive Insulation co-ordination rated impulse pollution (IEC 60664) withstand voltage degree 2.5 kV 2 (reinforced insulation in the mounting area) Dielectric strength operating area test voltage AC 3,000 V Insulation resistance > 100 MΩ (DC 500 V) Interrupting capacity Icn 800 A Interrupting capacity (UL 1077) IN U N 20...80 A AC 240 V 1,000 A 20...60 A AC 120 V 3,500 A

80 A AC 120 V 2,000 A

20...50 A DC 50 V 3,500 A 60...80 A DC 50 V 2,000 A Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Vibration 8 g (57-500 Hz) ± 0.61 mm (10-57 Hz) to IEC 60068-2-6, test Fc 10 frequency cycles/axis Shock 25 g (11 ms) to IEC 60068-27, test Ea Corrosion 96 hours at 5 % salt mist, to IEC 60068-2-11, test Ka Humidity 240 hours at 95 % RH to IEC 60068-2-78, test Cab Mass approx. 55 g Current rating (A) Internal resistance (Ω) Current rating (A) Internal resistance (Ω) 20 < 0.02 40 < 0.01 25 < 0.02 50 < 0.01 30 < 0.02 60 < 0.01 35 < 0.02 70 < 0.01 35 < 0,02 80 < 0,01 Preferred types Preferred types Standard current ratings (A) 20 25 30 35 40 45 50 60 70 80 4130-G211-K4M1- x x x x x x x x x 4130-G411-K4M1- x x x x x x x x x Authority Standard Rated voltage Current ratings VDE IEC/EN 60934 AC 240 V DC 50 V

20 A…70 A

20 A…80 A

CSA C22.2 No 235 AC 240 V DC 50 V

High Performance Thermal Circuit Breaker 4130-... www.e-t-a.de 2249 The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section Technical information. Ambient temp. °F -22 -30 -20 +14 -10 +32 +73.4 +23 +104 +40 +122 +50 +140 +60 Dimensions Accessories LINE tightening torque max. 1.5 Nm 10.3 .406 2.52 17.2±0.5 .677±.020 23.8±0.5 .937±.020 ø6.6±0.1 1.97 13.5 .531 22.3 .878 max. 3.5 max. .138 .709 1.26 .472 .669 12.2-0.1 .480-.004 black screw M6x8 with washer tightening torque max. 2 Nm mounting holeD-shaped threadneck OFF ON M12x1 0.6±0.2 .024±.008 11.5-0.1 .453-.004 12 46 81 02 04 0 ... times rated current Trip time in seconds 10000 1000 100 0,1 350,8 23 °C 60 °C -30 °C Typical time/current characteristics LINE 1.18 .236 .197 operating area mounting area Intstallation drawing line 1 Internal connection diagram Separate hardware Hex nut Y 300 116 02 Hex nut with splash cover, black X 200 801 03 with O ring (IP66 /IP67) Hex nut with splash cover, transparent X 200 801 08 with O ring (IP66/IP67) M12x1 M12x1 Water splash cover, transparent with knurled nut and O ring (IP64) X 210 663 01 M12x1 2.5 Knurled nut Y 302 065 01 ø17 M12x1 3.2 0.5 x 45°SW14 .551 .098 .126 .669 .020 x 45° This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted.