HFA1412 INTERSIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • This Circuit is Processed in Accordance to MIL-STD- 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
  • User Programmable For Closed-Loop Gains of +1, -1 or +2 Without Use of External Resistors
  • Standard Operational Amplifier Pinout

Applications

  • Flash A/D Driver
  • Video Switching and Routing
  • Pulse and Video Amplifiers
  • Wideband Amplifiers
  • RF/IF Signal Processing
  • Medical Imaging Systems PRELIMINARY June 1994 Pinout HFA1412/883 (CERDIP) TOP VIEW OUT1 -IN1 +IN1 +IN2 -IN2 OUT2 OUT4 -IN4 +IN4 +IN3 -IN3 OUT3 Spec Number 511114-883 File Number 3744

of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPL Y =±5V, AV = +1, RSOURCE = 0Ω , RL = 100Ω , VOUT = 0V, Unless Otherwise Specified.

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPL Y =±5V, AV = +1, RSOURCE = 0Ω , RL = 100Ω , VOUT = 0V, Unless Otherwise Specified.

  1. Output is short circuit protected to ground. Brief short circuits to ground will not degrade reliability, however continuous (100% duty cycle)

output current must not exceed 30mA for maximum reliability.

  1. Guaranteed from +IN Common Mode Rejection Test, by: +RIN = 1/CMSIBP .
  2. Guaranteed from VOUT Test with RL =5 0Ω , by: IOUT =V OUT /50Ω.

TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Table 2 Intentionally Left Blank. TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Table 3 Intentionally Left Blank. TABLE 4. ELECTRICAL TEST REQUIREMENTS

  1. PDA applies to Subgroup 1 only.

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPL Y =±5V, AV = +1, RSOURCE = 0Ω , RL = 100Ω , VOUT = 0V, Unless Otherwise Specified. All Intersil semiconductor products are manufactured, assembled and tested underISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.