4069UB

HCC4069UB STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

DESCRIPTION

.MEDIUM-SPEED OPERATION –tPHL ,tPLH = 30ns (typ.) AT 10V .QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE .STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS .5V, 10V, AND 15V PARAMETRIC RATINGS .INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE .100% TESTED FOR QUIESCENT CURRENT .MEETS ALL REQUIREMENTS OF JEDECTEN- TATIVE STANDARDN °13A, ”STANDARD SPE- CIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” The HCC4069UB (extended temperature range) and HCF4069UB (intermediate temperature range) are monolithic integrated circuit, available in 14-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4069UB consists ofsix COS/MOS in- verter circuits. Thisdeviceis intended forall general- purpose inverter applications where the medium-power TTL-drive and logic-level-conver- sion capabilities of circuits suchasHCC/HCF4049B Hex Inverter/Buffers are not required. EY (Plastic Package) F (Ceramic Frit Seal Package) (Micro Package) (Plastic Chip Carrier) ORDER CODES : HCC4069 UBF HCF4069UBM1 HCF4069UBE Y HCF4069UBC1 PIN CONNECTIONS

Symbol Parameter Value Unit V DD * Supply Voltage :HCC Types HCF Types – 0.5 to + 20 – 0.5 to + 18 V V V i Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA P tot Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package-temperature Range 200 100 mW mW T op Operating Temperature :HCC Types HCF Types – 55 to + 125 –4 0t o+8 5 T stg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sec- tions of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to V SS pin voltage. SCHEMATIC DIAGRAM OF ONE OF SIX IDENTICAL INVERTERS. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V DD Supply Voltage :HCC Types HCF Types 3t o1 8 3t o1 5 V V V I Input Voltage 0 to V DD V T op Operating Temperature :HCC Types HCF Types – 55 to + 125 –4 0t o+8 5 HCC/HCF4069UB

STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Value V I V O |IO |V DD T Low * 25 °CT High *Symbol Parameter Unit IL Quiescent Current HCC Types 0/ 5 5 0.25 0.01 0.25 7.5 µA 0/10 10 0.5 0.01 0.5 15 0/15 15 1 0.01 1 30 0/20 20 5 0.02 5 150 HCF Types 0/ 5 5 1 0.01 1 7.5 0/10 10 2 0.01 2 15 0/15 15 4 0.01 4 30 V OH Output High Voltage 0/ 5 < 1 5 4.95 4.95 4.95 V0/10 < 1 10 9.95 9.95 9.95 0/15 < 1 15 14.95 14.95 14.95 V OL Output Low Voltage 5/0 < 1 5 0.05 0.05 0.05 V10/0 < 1 10 0.05 0.05 0.05 15/0 < 1 15 0.05 0.05 0.05 V IH Input High Voltage 0.5/4.5 < 1 5 4 4 4 V1/9 < 1 10 8 8 8 V IL Input Low Voltage 4.5/0.5 < 1 5 1 1 1 V9/1 < 1 10 2 2 2 IOH Output Drive Current HCC Types mA HCF Types I OL Output Sink Current HCC Types 0/ 5 0.4 5 0.64 0.51 1 0.36 mA HCF Types 0/ 5 0.4 5 0.52 0.44 1 0.36 I IH,IIL Input Leakage Current HCC Types 0/18 Any Input µA HCF Types 0/15 15 ± 0.3 ±10–5 ± 0.3 ± 1 C I Input Capacitance Any Input 5 7.5 pF *T Low =–5 5 °Cf o rHCC device : – 40°Cf o rHCF device. *T High = + 125°Cf o rHCC device : + 85°Cf o rHCF device. HCC/HCF4069UB

DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb =2 5°C, CL = 50pF, RL = 200kΩ , typical temperature coefficient for all VDD = 0.3%/°C values, all input rise and fall time = 20ns) ValueSymbol Parameter Test Conditions V DD (V) Min. Typ. Max. Unit tPLH ,tPHL Propagation Delay Time 5 55 110 ns10 30 60 15 25 50 tTLH ,tTHL Transition Time 5 100 200 ns10 50 100 15 40 80 Typical Current and Voltage Transfer Charac- teristics. Minimum and Maximum Voltage Transfer Charac- teristics. Typical Voltage Transfer Characteristics as a Function of Temperature. Typical Output Low (sink) Current Characteristics. HCC/HCF4069UB

Typical Output High (source) Current Charac- teristics. Minimum Output Low (sink) Current Charac- teristics. Typical Propagation Delay Time vs. Load Capacit- ance. Minimum Output High (source) Current Charac- teristics. Typical Transition Time vs. Load Capacitance.Typical Propaga tion Delay Time vs. Load Capacit- ance. HCC/HCF4069UB

Typical Dynamic Power Dissipation/per Inverter vs. Frequency. Variation of Normalized Propagation Delay Time (tPHL and tPLH ) with Supply Voltage. Typical RC Oscillator Circuit.Typical Crystal Oscillator Circuit.

APPLICATIONS

High Input Impedance Amplifier. Input Pulse Shaping Circuit (schmitt trigger). HCC/HCF4069UB

Noise Immunity.Quiescent Device Current. TEST CIRCUITS Input Leakage Current. DYNAMIC ELECTRICAL CHARACTERISTICS AND WAVEFORMS HCC/HCF4069UB

Plastic DIP14 MECHANICAL DATA DIM. mm inch a1 0.51 0.020 B 1.39 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 2.54 0.050 0.100 P001A HCC/HCF4069UB

Ceramic DIP14/1 MECHANICAL DATA DIM. mm inch A 20 0.787 B 7.0 0.276 D 3.3 0.130 E 0.38 0.015 e3 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N 10.3 0.406 P 7.8 8.05 0.307 0.317 Q 5.08 0.200 P053C HCC/HCF4069UB

DIM. mm inch A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S8 ° (max.) P013G HCC/HCF4069UB

DIM. mm inch A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A HCC/HCF4069UB

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specificationsmentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronicsproducts are not authorized foruse ascritical componentsin life support devices or systems without express written approval of SGS-THOMSON Microelectonics.  1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A HCC/HCF4069UB