DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
UNISONIC TECHNOLOGIES CO., LTD
4066 CMOS IC
www.unisonic.com.tw 1 of 7 Copyright © 2014 Unisonic Technologies Co., Ltd QW-R502-009.F QUAD BILATERAL SWITCH DESCRIPTION The UTC 4066 is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. FEATURES * Wide supply voltage range: 3V ~ 15V. * High noise immunity : 0.45VDD (typ.) * Wide range of digital and ± 7.5VPEAK analog switching * “ON” resistance for 15V operation : 80Ω * Matched ”ON” resistance : ∆RON=5Ω (typ.) over 15V signal input * “ON” resistance flat over peak-to-peak signal range * High “ON” / “OFF” : 65 dB (typ.) output voltage ratio @ f IS=10kHz, RL=10kΩ * High degree linearity: 0.1% distortion (typ.). @ f IS=1kHz, VIS=5Vp-p. * V DD-VSS=10V, RL=10kΩ * Extremely low ”OFF” : 0.1nA (typ.) * switch leakage @V DD-VSS=10V, TA=25°C * Extremely high control input impedance : 1012Ω (typ.) * Low crosstalk : -50dB (typ.) * between switches @ f IS=0.9MHz, RL=1kΩ * Frequency response, switch ”ON” : 40MHz (typ.) ORDERING INFORMATION Ordering Number Package Packing Lead Free Halogen Free 4066L-D14-T 4066G-D14-T DIP-14 Tube - 4066G-S14-R SOP-14 Tape Reel - 4066G-P14-R TSSOP-14 Tape Reel MARKING DIP-14 SOP-14 / TSSOP-14 U T C 4066G 2 3 4 5 671 91011121314 Date Code Lot Code
UNISONIC TECHNOLOGIES CO., LTD 2 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 0 0 9 . F PIN CONFIGURATION SCHEMATIC DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD 3 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 0 0 9 . F ABSOLUTE MAXIMUM RATINGS (VSS=0V, unless otherwise specified)) PARAMETER SYMBOL RATINGS UNIT Supply Voltage V DD -0.5 ~ +18 V Input Voltage V IN -0.5 ~ V CC+0.5 V Power Dissipation DIP-14 PD 700 mW SOP-14/TSSOP-14 500 Junction Temperature T J +125 C Storage Temperature T STG -40 ~ +150 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS (VSS=0V, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage V DD 3 ~ 15 V Input Voltage V IN 0 ~ V DD V Operating Temperature Range T OPR -40 ~ +85 C DC ELECTRICAL CHARACTERISTICS (VSS=0V, unless otherwise specified) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Quiescent Device Current I DD VDD=5V 0.01 1.0 μAVDD=10V 0.01 2.0 VDD=15V 0.01 4.0 SIGNAL INPUTS AND OUTPUTS Input or Output Leakage Switch “OFF” IIS V C=0 ±0.1 ±50 nA “ON” Resistance R ON RL=10kΩ~ (VDD-VSS/2) VC=VDD, VSS ~ VDD VDD=5V 270 1050 Ω VDD=10V 120 400 VDD=15V 80 240 ∆”ON” Resistance Between Any 2 of
4 Switches ∆RON RL=10kΩ~ (VDD-VSS/2)
VC=VDD, VIS=VSS ~VDD VDD=10V 10 Ω VDD=15V 5 CONTROL INPUTS Low Level Input Voltage V ILC VIS=VSS and VDD VOS=VDD and VSS IIS=±10μA VDD=5V 2.25 1.5 V VDD=10V 4.5 3.0 VDD=15V 6.75 4.0 HIGH Level Input Voltage V IHC VDD=5V 3.5 2.75 V VDD=10V (Note) 7.0 5.5 VDD=15V 11.0 8.25 Input Current I IN VDD-VSS=15V, VDD≧VIS≧VSS, VDD≧VC≧VSS ±10 -5 ±0.3 μA Note: Conditions for VIHC: (a) VIS=VDD, IOS=standard B series IOH. (b) VIS=0V, IOL=standard B series IOL
UNISONIC TECHNOLOGIES CO., LTD 4 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 0 0 9 . F AC ELECTRICAL CHARACTERISTICS (AC Parameters are guaranteed by DC correlated testing) (TA=25C, tR=tF=20 ns and VSS=0V unless otherwise) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT Propagation Delay Time Signal Input to Signal Output TPHL, TPLH VC=VDD, CL=50Pf (Figure1) RL=200k VDD=5V 25 55 nsVDD=10V 15 35 VDD=15V 10 25 Propagation Delay Time Control Input to Signal Output High Impedance to Logical Level t PZH, tPLZ RL=1.0kΩ, CL=50pF (Fig. 2, 3) VDD=5V 125 nsVDD=10V 60 VDD=15V 50 Propagation Delay Time Control Input to Signal Output Logical Level to High Impedance t PHZ, tPLZ RL=1.0kΩ, CL=50pF (Fig. 2, 3) VDD=5V 125 nsVDD=10V 60 VDD=15V 50 Sine Wave Distortion VC=VDD=5V, VSS= -5V RL=10kΩ, VIS=5VP-P, f=1kHz, (Fig. 4) 0.1 % Frequency Response -Switch “ON” (Frequency at-3dB) VC=VDD=5V, VSS= -5V RL=1kΩ, VIS=5Vp-p 20 Log10 VOS/VOS (1kHz)-dB (Fig. 4)
40 MHz
Feedthrough - Switch “OFF” (Frequency at –50 dB) VDD=5.0V, VCC=VSS= -5.0V, RL=1kΩ, VIS=5.0VP-P, 20Log10, VOS/VIS= -50dB, (Fig. 4)
1.25 MHz
Switches(Frequency at-50dB) VDD=VC(A)=5.0V; VSS=VC (B)=5.0V, RL=1kΩ, VIS(A)=5.0VP-P, 20Log10, VOS(B)/VIS (A)= -50dB (Fig. 5)
0.9 MHz
Crosstalk; Control Input to Signal Output VDD=10V, RL=10kΩ, RIN=1.0kΩ, VCC=10V Square Wave, CL=50pF (Fig. 6) 150 mV p-p Maximum Control Input RL=1.0kΩ, CL=50pF (Fig. 7) VOS (f) =1/2Vos (1.0kHz) VDD=5.0V 6.0 MHzVDD=10V 8.0 VDD=15V 8.5 Signal Input Capacitance C IS 8.0 pF Signal Output Capacitance C OS V DD=10V 8.0 pF Feedthrough Capacitance C IOS V C=0V 0.5 pF Control lnput Capacitance C IN 5.0 7.5 pF
UNISONIC TECHNOLOGIES CO., LTD 5 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 0 0 9 . F SPECIAL CONSIDERATIONS In applications where separate power sources are used to drive VDD and the signal input, the VDD current capability should exceed V DD/RL (R L=effective external load of the UTC 4066 bilateral switches).This provision avoids any permanent current flow or clamp action of the VDD supply when power is applied or removed from UTC 4066. In certain applications, the external lo ad-resistor current may include both V DD and Signal-line components. To avoid drawing V DD current when switch current flows into termi nals 1,4,8 or 11,the voltage drop across the bidirectional swith must not exceed 0.6V at TA ≤ 25°C, or 0.4V at TA >25°C (calculated from RON values shown). NO VDD current will flow through RL if the switch current flows into terminals2, 3, 9 or 10. AC TEST CIRCUITS AND SWITCHING TIME WAVEFORMS CONTROL VDD IN/OUT OUT/IN VSS
1 OF 4
1KΩ 50% VDD VDD VOL tPLZ Fig. 3 tPZL,t PLZ Propagation Delay Time Control to Signal Output VIS=0V tPZL VDD 50% tPZL tPLZVDD 90% 10% VDD VOL CL 50pF
UNISONIC TECHNOLOGIES CO., LTD 6 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 0 0 9 . F AC TEST CIRCUITS AND SWITCHING TIME WAVEFORMS(Cont.) VC(1)=VDD VOS(1) RL 1kΩ Fig. 5 Crosstalk Between Any Two Switches VIS(1) -5V VC(2)=Vss 5V VOS(2) RL 1kΩ -5V VIS(2)=0V CONTROL VDD IN/OUT OUT/IN Vss 2.5V VIS 0V -2.5V VDD VC VOS VC VOS RL 1kΩ VIS=VDD CL 50pF Fig. 7 Maximum Control Input Frequency VDD tF tF 90%50% 50% 10% 10% 1/f VOS 1kHz CONTROL VDD IN/OUT OUT/IN VSS
UNISONIC TECHNOLOGIES CO., LTD 7 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 0 0 9 . F TYPICAL PERFORMANCE CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.