4066

HCF4066B STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

n 15V DIGITAL OR± 7.5V PEAK TO PEAK SWITCHING n 125Ω TYPICAL ON RESISTANCE FOR 15V OPERATION n SWITCH ON RESISTANCE MATCHED TO WITHIN 5Ω TYP . OVER 15V SIGNAL INPUT RANGE n ON RESISTANCE FLAT OVER FULL PEAK TO PEAK SIGNAL RANGE n HIGH ON/OFF OUTPUT VOLTAGE RATIO : 65dB TYP. at f IS= 10KHz, RL = 10KΩ n HIGH DEGREE OF LINEARITY : < 0.5% DISTORTION TYP . at fIS = 1KHz, VIS =5V pp, VDD -V SS > 10V, RL = 10KΩ n EXTREMEL Y LOW OFF SWITCH LEAKAGE RESULTING IN VERY LOW OFFSET CURRENT AND HIGH EFFECTIVE OFF RESISTANCE : 10pA TYP. at V DD -V SS = 10V, Tamb =2 5°C n EXTREMEL Y HIGH CONTROL INPUT IMPEDANCE (control circuit isolated from signal circuit 1012Ω typ.) n LOW CROSSTALK BETWEEN SWITCHES : 50dB Typ. at fIS= 0.9MHz, RL =1 KΩ n MATCHED CONTROL - INPUT TO SIGNAL OUTPUT CAPACITANCE : REDUCES OUTPUT SIGNAL TRANSIENTS n FREQUENCY RESPONSE SWITCH ON : 40MHz (Typ.) n QUIESCENT CURRENT SPECIF. UP TO 20V n 5V, 10V AND 15V PARAMETRIC RATINGS n INPUT LEAKAGE CURRENT II= 100nA (MAX) AT VDD = 18V TA =2 5°C n 100% TESTED FOR QUIESCENT CURRENT n MEETS ALL REQUIREMENTS OF JEDEC JESD13B ” STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES”

DESCRIPTION

The HCF4066B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4066B is a QUAD BILATERAL SWITCH intended for the transmission or multiplexing of analog or digital signals. It is pin for pin compatible with HCF4016B, but exhibits a much lower ON resistance. In addition, HCF4066B QUAD BILATERAL SWITCH FOR TRANSMISSION OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS PIN CONNECTION ORDER CODES PACKAGE TUBE T & R DIP HCF4066BEY SOP HCF4066BM1 HCF4066M013TR DIP SOP

the ON resistance is relatively constant over the full input signal range. The HCF4066B consists of four independent bilateral switches. A single control signal is required per switch. Both the p and n device in a given switch are biased ON or OFF simultaneously by the control signal. As shown in schematic diagram , the well of the n-channel device on each switch is either tied to the input when the switch is ON or to V SS when the switch is OFF. This configuration eliminates the variation of the switch-transistor threshold voltage with input signal, and thus keeps the ON resistance low over the full operating signal range. The advantages over single channel switches include peak input signal voltage swings equal to the full supply voltage, and more constant ON impedance over the input signal range. For sample and hold applications, however, the HCF4016B is recommended. INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION TRUTH TABLE SCHEMATIC DIAGRAM (1 OF 4 IDENTICAL SWITCHES AND ITS ASSOCIATED CONTROL CIRCUITY) PIN No SYMBOL NAME AND FUNCTION 1, 4, 8, 11 A to D I/O Independent Inputs/Out- puts 2, 3, 9, 10 A to D O/I Independent Outputs/ Inputs 13, 5, 6, 12CONTROL At oD Enable Inputs

7 VSS Negative Supply Voltage

14 VDD Positive Supply Voltage

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS

ELECTRICAL CHARACTERISTICS

(Tamb =2 5°C,Typical temperature coefficient for all VDD value is 0.3 %/°C) Symbol Parameter Value Unit V DD Supply Voltage -0.5 to +22 V V I DC Input Voltage -0.5 to V DD + 0.5 V II DC Input Current ± 10 mA PD Power Dissipation per Package 200 mW Power Dissipation per Output Transistor 100 mW Top Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Symbol Parameter Value Unit V DD Supply Voltage 3t o2 0 V V I Input Voltage 0 to V DD V Top Operating Temperature -55 to 125 °C Symbol Parameter Test Condition Value UnitVI (V) VDD (V) TA =2 5°C -40 to 85°C -55 to 125°C IL Quiescent Device Current (all switches ON or all switches OFF) 0/5 5 0.01 0.25 7.5 7.5 µA0/10 10 0.01 0.5 15 15 0/15 15 0.01 1 30 30 0/20 20 0.02 5 150 150 SIGNAL INPUTS (V IS) and OUTPUTS (VOS ) R ON Resistance V C =V DD R L = 10KΩ Return to (VDD -VSS )/2 VIS=V SS to VDD 5 470 1050 1200 1200 Ω10 180 400 500 500 15 125 240 300 300 ΔON ResistanceΔ RON (between any 2 of 4 switches) R L = 10KΩ ,V C =V DD Ω10 10 15 15 TDH Total Harmonic Distortion VC =V DD =5 V ,VSS = -5V VIS (p-p) = 5V, RL = 10KΩ (sine wave centered in 0V) fIS = 1KHz sine wave 0.4 % -3dB Cutoff Frequency (Switch on) V C =V DD =5 V ,VSS = -5V VIS (p-p) = 5V, RL =1 KΩ (sine wave centered in 0V)

40 MHz

-50dB Feedthrough Frequency (switch off) V C =V SS = -5V VIS (p-p) = 5V, RL =1 KΩ (sine wave centered in 0V) 1M H z

-50dB Crosstalk Frequency VC(A) =V DD = +5V VC(B) =V SS =-5 V VIS(A)= 5V (p-p) 50Ω source, RL =1 KΩ 8M H z tpd Propagation Delay Time (signal input to output) R L = 200KΩ, VC =V DD VSS = GND, CL = 50pF VIS= 10V square wave centered on 5V tr,tf= 20ns 20 40 ns 10 20 71 5 C IS Input Capacitance VC =V SS =- 5 +5 pFC OS Output Capacitance 8 C IOS Feedthrough 0.5 Input/Output Leakage Current Switch OFF VC =0 V VIS= 18V, VOS =0 V VIS =0 V ,VOS = 18V CONTROL (V C ) VILC Control Input Low Voltage  IIS <1 0µA V IS =V SS ,VOS =V DD and V IS =V DD ,V OS =V SS 51 1 1 V10 2 2 2 15 2 2 2 VIHC Control Input High Voltage 5 3.5 3.5 3.5 V10 7 7 7 15 11 11 11 II Input Leakage Current VIS <V DD VDD -V SS = 18V 18 ±10-5 ±0.1 ±1 ±1 µA Crosstalk (control input to signal output) V C = 10V (sq. wave) tr,tf= 20ns R L = 10KΩ 10 50 mV Turn - On Propagation Delay Time V IN =V DD, tr,tf= 20ns C L = 50pF, RL =1 KΩ 53 5 7 0 ns10 20 40 15 15 30 Control Input Repetition Rate VIS=V DD, VSS =GND R L =1 KΩ to GND C L = 50pF, VC = 10V sq. wave center on 5V tr,tf= 20ns VOS =1/2VOS at 1KHz MHz 10 9 15 9.5 C I Input Capacitance Any Input 5 7.5 pF Symbol Parameter Test Condition Value UnitVI (V) VDD (V) TA =2 5°C -40 to 85°C -55 to 125°C

TYPICAL APPLICATIONS (BIDIRECTIONAL SIGNAL TRANSMISSION VIA DIGITAL CONTROL LOGIC) TYPICAL APPLICATIONS (4-CHANNEL PAM MULTIPLEXER SYSTEM DIAGRAM)

C L = 50pF or equivalent (includes jig and probe capacitance) R L = 200KΩ R T =Z OUT of pulse generator (typically 50Ω ) WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle)

DIM. mm. inch a1 0.51 0.020 B 1.39 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 2.54 0.050 0.100 Plastic DIP-14 MECHANICAL DATA P001A

DIM. mm. inch A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S8 ° (max.) SO-14 MECHANICAL DATA PO13G

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.  The ST logo is a registered trademark of STMicroelectronics  2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom  http://w ww.st.com