4066

MAX4066 MAXIM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

The MAX4066/MAX4066A quad, SPST, CMOS analog switches are designed to provide superior performance over the industry-standard devices. These new switch- es feature guaranteed operation from +2.0V to +16V and are fully specified at 3V, 5V, and 12V. Both parts offer 45 Ω on-resistance and 2 Ω channel-to-channel matching at 12V, plus 4 Ω flatness over the specified signal range. Each device is controlled by TTL/CMOS input levels and can be used as a bilateral switch or multiplexer/ demultiplexer. Low off leakage current (100pA for the MAX4066A) and low power consumption (0.5µW) make the MAX4066/ MAX4066A ideal for battery-operated equipment. These parts are also suitable for low-distortion audio applica- tions. Both devices are available in 14-pin DIP and SO packages, as well as a 16-pin QSOP. ESD protection is greater than 2000V per Method 3015.7. Battery-Operated Equipment Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Sample-and-Hold Circuits Communication Circuits ' Pin Compatible with 74HC4066 ' Guaranteed On-Resistance: 170Ω max (3V supply) 45Ω max (12V supply) ' Guaranteed Match Between Channels: 4Ω max (MAX4066) 2Ω max (MAX4066A) ' Guaranteed Low Leakage Currents: 1nA at +25°C (MAX4066) 100pA at +25°C (MAX4066A) ' Single-Supply Operation from +2.0V to +16V ' V+ to GND Signal Handling ' TTL/CMOS-Logic Compatible ' Low Power Consumption: 0.5µW ' Low Crosstalk: -86dB ' Low Off Isolation: -58dB ' Low Distortion: 0.03% ' Wide Bandwidth: > 100MHz MAX4066/MAX4066A Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches TRUTH TABLE ON/OFF CONTROL INPUT L H OFF ON STATE OF ANALOG SWITCH IN1 IN4 NO4COM2 NO2 COM1 NO1 TOP VIEW MAX4066 MAX4066A COM4 COM3 NO3GND IN3 IN2 DIP/SO IN1 IN4 NO4 COM4 N.C. COM3 NO3 NO1 COM1 N.C. NO2 COM2 IN2 IN3 GND MAX4066 MAX4066A QSOPN.C. = NO INTERNAL CONNECTION 19-0439; Rev 1; 3/96 PART MAX4066 CPD MAX4066CSD MAX4066CEE 0°C to +70°C 0°C to +70°C 0°C to +70°C TEMP. RANGE PIN-PACKAGE

14 Plastic DIP

14 Narrow SO

16 QSOP

Ordering Information continued at end of data sheet. * Contact factory for dice specifications. MAX4066C/D 0°C to +70°C Dice* For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800

Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS—Single +12V Supply (V+ = 12V ±10%, GND = 0V, VINH = 4.0V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. (Voltages referenced to GND) V Continuous Power Dissipation (T A = +70°C) Operating Temperature Ranges (Note 3) V+ = 12V, VCOM = 0V, VNO = 10V V+ = 12V, I COM = 2mA, VNO = 10V V+ = 12V, I COM = 2mA, VNO = 10V, 5V, 1V CONDITIONS nA -100 100 INO(OFF) NO or NC Off Leakage Current (Note 6) -6 6 -0.1 0.1 -1 1 Ω RFLAT(ON) On-Resistance Flatness (Note 5) V0V +VCOM, VNO Analog Signal Range Ω DRONOn-Resistance Match Between Channels (Note 4) 0.5 2 0.5 4 16 45 UNITSMIN TYP MAX (Note 2)SYMBOLPARAMETER TA = +25°C MAX4066 MAX4066ATA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX MAX4066 MAX4066A C, E M V+ = 12V, V COM = 0V, VNO = 10V TA = +25°C nA -100 100 ICOM(OFF) COM Off Leakage Current (Note 6) -6 6TA = TMIN to TMAX MAX4066 -0.1 0.1MAX4066A C, E -1 1 M V+ = 12V, V COM = 10V, VNO = 10V TA = +25°C nA -200 200 ICOM(ON) COM On Leakage Current (Note 6) -12 12TA = TMIN to TMAX MAX4066 -0.2 0.2MAX4066A C, E -2 2 M C, E 55 M On-Resistance RON Ω V+ = 12V, I COM = 2mA, VNO = 10V TA = TMIN to TMAX 75 Note 1:Signals on NO_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum current rating. ANALOG SWITCH

Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches ELECTRICAL CHARACTERISTICS—Single +12V Supply (continued) (V+ = 12V ±10%, GND = 0V, VINH = 4.0V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL MIN TYP MAX (Note 2) UNITS Input Current with Input Voltage High IINH -0.5 0.005 0.5 µA CONDITIONS IN = 5.0V, all others = 0.8V Input Current with Input Voltage Low Turn-On Time tON 25 100 ns Charge Injection (Note 3) VCTE 11 0 pCCL = 1.0nF, VGEN = 0V, RGEN = 0Ω , Figure 3 TA = +25°C TA = TMIN to TMAX 150VCOM = 10V, Figure 2 TA = +25°C TA = TMIN to TMAX 100VCOM = 10V, Figure 2Turn-Off Time tOFF 15 75 ns Power-Supply Range Signal = 0dbm, Figure 4, 50Ω in and outOn-Channel Bandwidth BW 100 MHz TA = +25°C TA = +25°CRL = 50Ω , CL = 5pF, f = 1MHz, Figure 4Off Isolation (Note 7) VISO -58 dB TA = +25°CRL = 50Ω , CL = 5pF, f = 1MHz, Figure 5Crosstalk (Note 8) VCT -86 dB TA = +25°Cf = 1MHz, Figure 6NO Capacitance C(OFF) 9 pF TA = +25°Cf = 1MHz, Figure 6COM Off Capacitance CCOM(OFF) 9 pF TA = +25°Cf = 1MHz, Figure 6COM On Capacitance CCOM(ON) pF V Supply Current I+ VIN = 0V or V+, all channels on or off TA = TMIN to TMAX -1 0.001 1 µA Total Harmonic Distortion THD TA = TMIN to TMAX 0.03 % TA = +25°C LOGIC INPUT SUPPLY DYNAMIC

Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches PARAMETER SYMBOL MIN TYP MAX (Note 2) UNITS Analog Signal Range VCOM, VNO 0V + V CONDITIONS (Note 3) On-Resistance RON 45 75 Ω V+ = 4.5V, I COM = -1.0mA, VNO = 3.5V Turn-On Time tON 43 125 nsVNO = 3V On-Channel Bandwidth BW 100 MHzSignal = 0dBm, 50Ω in and out, Figure 4 Turn-Off Time tOFF 18 75 nsVNO = 3V Positive Supply Current I+ -1 1 µA Charge Injection (Note 3) Q 21 0 pCVGEN = 0V, RGEN = 0V, CL = 1.0nF, Figure 3 TA = +25°C TA = +25°C TA = +25°C TA = +25°C TA = +25°C TA = +25°C TA = TMIN to TMAX TA = TMIN to TMAX -100 100 On-Resistance Match Between Channels (Note 4) ∆RON 0.3 4 Ω V+ = 5V, ICOM = -1.0mA, VNO = 3V On-Resistance Flatness (Notes 3, 5) RFLAT(ON) Ω V+ = 5V, I COM = -1.0mA, VNO = 1V, 3V NO Off Leakage Current (Note 6) INO(OFF) -1 1 nA V+ = 5.5V, V COM = 0V, VNO = 4.5V COM Off Leakage Current (Note 6) ICOM(OFF) -1 1 nA V+ = 5.5V, V COM = 0V, VNO = 4.5V COM On Leakage Current (Note 6) ICOM(ON) -2 2 nA V+ = 5.5V, V COM = 5V, VNO = 4.5V -6 6 -200 200 52 100 -6 6 -100 100 TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX C, E M C, E M C, E M -12 12 TA = +25°C TA = +25°C TA = TMIN to TMAX TA = TMIN to TMAX 175 125 TA = +25°C V+ = 5.5V, VIN = 0V or V+, all channels on or off ELECTRICAL CHARACTERISTICS—Single +5V Supply (V+ = 5V ±10%, V- = 0V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) 125 TA = TMIN to TMAX ANALOG SWITCH DYNAMIC SUPPLY C, E M MAX4066 MAX4066A MAX4066 MAX4066A MAX4066 MAX4066A -0.1 0.1 -0.2 0.2 -0.1 0.1

Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches PARAMETER SYMBOL MIN TYP MAX (Note 2) UNITS Analog Signal Range VCOM, VNO 0V + V CONDITIONS (Note 3) Channel On-Resistance RON 170 Ω V+ = 3V, I COM = -1.0mA, VNO = 1.5V Turn-On Time (Note 3) tON 80 185 nsV+ = 3V, V NO or VNC = 1.5V Turn-Off Time (Note 3) tOFF 28 150 nsV+ = 3V, V NO or VNC = 1.5V Positive Supply Current I+ -1 0.001 1 µA Charge Injection (Note 3) Q 21 0 pCCL = 1.0nF, VGEN = 0V, RGEN = 0V V+ = 3.6V, VIN = 0V or V+, all channels on or off TA = +25°C TA = +25°C TA = +25°C TA = +25°C TA = TMIN to TMAX TA = TMIN to TMAX TA = TMIN to TMAX 225 230 200 ANALOG SWITCH DYNAMIC SUPPLY Note 2:The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 3:Guaranteed by design. Note 4:∆RON = RON (max) - RON (min). Note 5:Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 6:Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C. Note 7:Off Isolation = 20log10 (VCOM / VNO), VCOM = output, VNO = input to off switch. Note 8:Between any two switches. ELECTRICAL CHARACTERISTICS—Single +3V Supply

Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches (TA = +25°C, unless otherwise noted.) 140 150 120 100 02 468 1 0 1 2 1 4 1 6 ON-RESISTANCE vs. VCOM MAX4066-01 VCOM (V) RON (Ω ) A: V+ = 2.5V B: V+ = 3.0V C: V+ = 5V D: V+ = 10V E: V+ = 15V A B V- = 0V C D E 02 468 1 0 1 2 1 4 1 6 ON-RESISTANCE vs. VCOM AND TEMPERATURE MAX4066-02 VCOM (V) RON (Ω ) A: TA = -55°C B: TA = +25°C C: TA = +85°C D: TA = +125°C D C B A V+ = 5V 100 0.0001 -50-75 125 OFF LEAKAGE CURRENT vs. TEMPERATURE MAX4066-03 TEMPERATURE (°C) OFF LEAKAGE (nA) 0.01 0.001 -25 0 75 0.1 50 100 V+ = 5.5V VCOM = 0V VNO = 4.5V 100 0.0001 -50-75 125 ON LEAKAGE CURRENT vs. TEMPERATURE MAX4066-04 TEMPERATURE (°C) ON LEAKAGE (nA) 0.01 0.001 -25 0 75 0.1 50 100 -60 1 10 100 300 FREQUENCY RESPONSE -50 MAX4066-07 FREQUENCY (MHz) LOSS (dB) -40 -20 -30 -10 -60 -40 -20 PHASE (degrees) ON PHASE ON RESPONSE OFF ISOLATION V+ = 5V INPUT = 0dBm 50Ω IN AND OUT 2468 1 0 1 20 CHARGE INJECTION vs. VCOM MAX4066-05 VCOM (V) VCTE (pC) A: V+ = 12V B: V+ = 5V C: V+ = 3V B A C 100 0.0001 -50-75 125 SUPPLY CURRENT vs. TEMPERATURE MAX4066-06 TEMPERATURE (°C) I+ (µA) 0.01 0.001 -25 0 75 0.1 50 100 V+ = 5.5V 100 0.01 10 100 1k 10k 20k TOTAL HARMONIC DISTORTION vs. FREQUENCY 0.1 MAX4066-08 FREQUENCY (Hz) THD (%) V+ = 12V 5Vp-p SIGNAL 600Ω IN AND OUT

ings may cause permanent damage to the devices. Figure 1. Overvoltage Protection Using Two External Blocking

Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches COM3 COM4 NO4 COM1 NO2 COM2 IN2 NO1 V+ IN1 IN4 IN3 GND NO3 0.108" (2.74mm) 0.065" (1.65mm) TRANSISTOR COUNT: 69 SUBSTRATE CONNECTED TO V+ PART MAX4066EPD MAX4066ESD MAX4066MJD -55°C to +125°C -40°C to +85°C -40°C to +85°C TEMP. RANGE PIN-PACKAGE

14 CERDIP**

MAX4066A CPD 0°C to +70°C 14 Plastic DIP MAX4066ACSD 0°C to +70°C 14 Narrow SO MAX4066ACEE 0°C to +70°C 16 QSOP MAX4066AEPD -40°C to +85°C 14 Plastic DIP MAX4066AESD -40°C to +85°C 14 Narrow SO MAX4066AEEE -40°C to +85°C 16 QSOP MAX4066AMJD -55°C to +125°C 14 CERDIP** * Contact factory for dice specifications. ** Contact factory for availability. MAX4066AC/D 0°C to +70°C Dice*

Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches DIM A B C E e eA eB L MIN 0.015 0.125 0.055 0.016 0.045 0.008 0.005 0.300 0.240 0.100 0.300 0.115 MAX 0.200 0.175 0.080 0.022 0.065 0.012 0.080 0.325 0.310 0.400 0.150 MIN 0.38 3.18 1.40 0.41 1.14 0.20 0.13 7.62 6.10 2.54 7.62 2.92 MAX 5.08 4.45 2.03 0.56 1.65 0.30 2.03 8.26 7.87 10.16 3.81 INCHES MILLIMETERS Plastic DIP PLASTIC DUAL-IN-LINE PACKAGE (0.300 in.) DIM D D D D D D PKG. P P P P P N MIN 0.348 0.735 0.745 0.885 1.015 1.14 MAX 0.390 0.765 0.765 0.915 1.045 1.265 MIN 8.84 18.67 18.92 22.48 25.78 28.96 MAX 9.91 19.43 19.43 23.24 26.54 32.13 INCHES MILLIMETERSPINS C A A2 E1D E eA eB B 0° - 15°A1L e 21-0043A DIM A B C E e H L MIN 0.053 0.004 0.014 0.007 0.150 0.228 0.016 MAX 0.069 0.010 0.019 0.010 0.157 0.244 0.050 MIN 1.35 0.10 0.35 0.19 3.80 5.80 0.40 MAX 1.75 0.25 0.49 0.25 4.00 6.20 1.27 INCHES MILLIMETERS 21-0041A Narrow SO SMALL-OUTLINE PACKAGE (0.150 in.) DIM D D D MIN 0.189 0.337 0.386 MAX 0.197 0.344 0.394 MIN 4.80 8.55 9.80 MAX 5.00 8.75 10.00 INCHES MILLIMETERSPINS 1.270.050 L 0°-8° HE D e A A1 C 0.101mm 0.004in. B

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 12 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600 © 1996 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. MAX4066/MAX4066A Low-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches DIM A B C D E e H h L N S α MIN 0.061 0.004 0.055 0.008 0.0075 0.150 0.230 0.010 0.016 MAX 0.068 0.0098 0.061 0.012 0.0098 0.157 0.244 0.016 0.035 MIN 1.55 0.127 1.40 0.20 0.19 3.81 5.84 0.25 0.41 MAX 1.73 0.25 1.55 0.31 0.25 3.99 6.20 0.41 0.89 INCHES MILLIMETERS 21-0055A QSOP QUARTER SMALL-OUTLINE PACKAGE DIM D S D S D S D S MIN 0.189 0.0020 0.337 0.0500 0.337 0.0250 0.386 0.0250 MAX 0.196 0.0070 0.344 0.0550 0.344 0.0300 0.393 0.0300 MIN 4.80 0.05 8.56 1.27 8.56 0.64 9.80 0.64 MAX 4.98 0.18 8.74 1.40 8.74 0.76 9.98 0.76 INCHES MILLIMETERSPINS L α H E E D e A C B S N h x 45° SEE VARIATIONS SEE VARIATIONS SEE VARIATIONS 0.635 BSC0.25 BSC