4060B BK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Dual Channel Function/Arbitrary Waveform Generators 4060B Series Technical data subject to change © B&K Precision Corp. 2019 www.bkprecision.com Features and benefits n 16-bit resolution, 8 Mpts, 300 MSa/s (DDS),
75 MSa/s (true point-by-point) arbitrary
n Up to 1.2 GSa/s sample rate for sine, square, triangle, and pulse waveforms n Two independent channels with one-button phase synchronization n Channel copy, track, and waveform combine functions n Generate sine waves up to 120 MHz n Harmonic generator function n Linear sweep, logarithmic sweep, and burst functions n Precise pulse width and rise/fall time adjustments n Supports AM/DSB-AM/FM//PM/PSK/FSK/ASK and PWM modulation types n DC signal level up to ±10 V into a high-z load or ±5 V into a 50 Ω load n Variable DC offset n Adjustable duty cycle n Frequency counter n Internal/external triggering n 196 built-in predefined arbitrary waveforms n Store/recall up to 10 instrument settings n LAN and USB device port (USBTMC-compliant) n GPIB connectivity with optional USB-to-GPIB adapter n Front-panel USB host port n Arbitrary waveform editing software included n LabVIEW™ driver is available The 4060B Series Dual Channel Function/Arbitrary Waveform Generators are capable of producing precise sine, square, triangle, pulse, and arbitrary waveforms. This series combines the cost saving benefits of both DDS and true point-by-point arbitrary architectures to meet a wide range of applications that require high signal fidelity and low jitter arbitrary waveform generation capabilities. Dual architecture operation The 4060B Series arbitrary waveform generator (AWG) architecture can be toggled between conventional DDS or true arbitrary mode. Compared to DDS (Fig. 1), true point-by-point AWG implementation offers improved signal integrity by producing lower jitter and less distortion (Fig. 2). All models are capable of generating 16-bit waveforms up to 300 MSa/s in DDS or 75 MSa/s in true arbitrary mode. Model 4062B 4063B 4064B Sine frequency range 1 µHz to 40 MHz 1 µHz to 80 MHz 1 µHz to 120 MHz Square frequency range 1 µHz to 25 MHz The intuitive touchscreen display simplifies control of many features including extensive waveform modulation schemes, linear/logarithmic sweep, burst mode, and variable DC offset. These generators provide system integrators with auxiliary triggering capabilities, and a 10 MHz reference clock for synchronizing multiple instruments. 196 built-in arbitrary waveforms offer a variety of arbitrary test signals for both simple and complex applications. Generate custom arbitrary waveforms and download them to the instrument using the included application software. Alternatively, use the included LabVIEWTM drivers to load .csv or .txt waveform data files directly into the generator’s internal memory. Reference clock (fixed) DDS Circuitry DAC Low jitter clock (variable) Waveform memory DAC Signal conditioning Fig. 1: DDS mode Fig. 2: True point-by-point arbitrary mode Signal conditioning
Dual Channel Function/Arbitrary Waveform Generators 4060B Series www.bkprecision.com Front panel USB host port Save/recall waveforms and instrument setups 4.3-inch LCD Anti-smudge touch screen display makes it easy to jump to different parameters on screen. Numeric keypad Input values directly Rotary control knob Increment and decrement values quickly and precisely Dedicated channel output buttons Channel outputsWaveforms and channel selection keys Function keys Adjust waveform parameters and access built-in waveforms Rear panel LAN interface USB interface Universal AC input No need to change fuses, switches, or jumpers Counter input Measure frequencies up to 200 MHz Auxiliary input/output Sync output, modulation input, external trigger input/output Chassis ground
10 MHz reference clock input/output
Synchronize output signals to a master time base
Dual Channel Function/Arbitrary Waveform Generators 4060B Series www.bkprecision.com Operation highlights The 4060B Series uses 16-bit sampling for enhanced resolution resulting in lower distortion and more accurate waveforms. 16-bit vertical resolution 14-bit 16-bit In DDS mode, these generators are capable of producing arbitrary waveforms at a frequency up to 20 MHz. DDS arbitrary waveforms can also be combined with modulation, sweep, and burst functions. True arbitrary mode uses a variable clock signal to generate precise custom arbitrary waveforms without skipping data points. As shown in the oscilloscope view above, the 8 million point arbitrary waveform is accurately reproduced with high signal fidelity. True arbitrary mode oscilloscope view
1 MHz Pulse
Generate precise true arbitrary waveforms Custom true arbitrary waveform at 75 MSa/s, 8 Mpts Built-in arbitrary waveform at 20 MHz, 300 MSa/s Versatile DDS operation Carrier AM/DSB-AM/FM/ PM/PSK/FSK/ASK PWM Burst Sweep Sine and Square √ √ √ Triangle / Ramp √ √ √ Pulse √ √ Noise √ Arbitrary √ √ √ Modulation types and operating modes These generators are capable of many different modulation types for various applications. High-performance pulse generator This series is equipped with advanced digital signal processing to reduce jitter and produce clean pulse waveforms. Sharp rise/fall times can be set from 8.4 ns up to 22.4 s with adjustment steps as small as 100 ps. The pulse width is adjustable to a minimum of 16.3 ns. Shown above is the oscilloscope view of the pulse width being incremented using the generators rotary control knob.
Dual Channel Function/Arbitrary Waveform Generators 4060B Series www.bkprecision.com Operation highlights Sweep Perform linear or log sweep functions with up or down directional control. The sweep source can be set to internal, external, or manual. Flexible phase control Phase-lock maintains phase deviation over both channels. In independent mode, the phase deviation between CH1 and CH2 changes at random allowing for smoother frequency transitions. Harmonics function Quickly output harmonics up to the 16th order with independent amplitude and phase settings. Channel combine function Create complex waveforms by internally adding each channel’s waveform and outputting the combined waveform on channel 1 or 2. Channel tracking function Customize channel coupling using frequency, amplitude, and phase. Enable automatic tracking between channels using deviation or ratio. Channel copy and sync function With the push of a button, all waveform parameters can be quickly copied between channels. Phase between channels can be adjusted. Frequency counter Displays mean, min, max, and many other frequency characteristics with an input frequency range of 0.1 Hz to 200 MHz. Generate waveforms with ease The provided waveform editing software can be used to create point-by-point arbitrary waveforms via freehand or waveform math functions. The standard LAN and USBTMC-compliant interfaces on the rear panel allow users to easily interface with a PC to load these waveforms into internal memory. The front panel also offers a convenient USB host port to save/recall instrument settings and waveform files on a USB flash drive.
Dual Channel Function/Arbitrary Waveform Generators 4060B Series www.bkprecision.com Specifications Model 4062B 4063B 4064B Channels 2 Frequency Characteristics Sine 1 µHz to 40 MHz 1 µHz to 80 MHz 1 µHz to 120 MHz Square 1 µHz to 25 MHz Triangle, Ramp 1 µHz to 1 MHz Pulse 1 µHz to 25 MHz Gaussian Noise (-3 dB) > 120 MHz Arbitrary 1 µHz to 20 MHz Accuracy ± 1 ppm (1 year) Resolution 1 µHz Note: All specifications apply to the unit after a temperature stabilization time of 30 minutes over an ambient temperature range of 23 °C ± 5 °C. Arbitrary Characteristics Built-in Waveforms 196 Waveform Length 8 points to 8 M points Vertical Resolution 16 bits Sampling Rate 300 MSa/s (DDS mode)
75 MSa/s (true arbitrary mode)
Time (typical) 4.5 ns (DDS mode) 8.5 ns (true arbitrary mode) Jitter (rms) < 150 ps (1 Vpp, into 50 Ω load, true arbitrary mode) Non-volatile Memory Storage 80 MB file system Output Characteristics Amplitude Range(1) (into open circuit) 2 mVpp to 20 Vpp ( ≤ 20 MHz) 2 mVpp to 10 Vpp ( > 20 MHz) Amplitude Resolution Up to 4 digits Amplitude Accuracy (10 kHz, 0 V offset) ± (1% + 1 mVpp) Amplitude Flatness (reference to 10 kHz Sine, 2.5 Vpp) ± 0.3 dB (50 Ω load, DC to 100 MHz) ± 0.4 dB (50 Ω load, 100 MHz to 120 MHz) Cross Talk < -60 dBc (between channels) Offset Range (DC) ± 5 V (into 50 Ω load) ± 10 V (into open circuit) Offset Resolution (DC) Up to 4 digits Offset Accuracy (DC) ± (1% + 2 mV), into open circuit Output Impedance (typical) 50 Ω Output Protection Overvoltage (see user manual for details) Waveform Characteristics Harmonic Distortion (sine, 0 dBm input, typical) DC to 10 MHz, < -65 dBc
10 MHz to 20 MHz, < -60 dBc
20 MHz to 40 MHz, < -55 dBc
40 MHz to 60 MHz, < -50 dBc
60 MHz to 80 MHz, < -45 dBc
80 MHz to 100 MHz, < -40 dBc
100 MHz to 120 MHz, < -38 dBc
(1) This specification will be divided by 2 while applied to a 50 Ω load. (2) Modulation schemes not available in DC mode. Waveform Characteristics (continued) Total Harmonic Distortion (sine) < 0.075% (10 Hz to 20 kHz at 0 dBm) Spurious (non-harmonic) ≤ 50 MHz, -70 dBc max. > 50 MHz, -65 dBc max. Rise/Fall Time (square) < 9 ns (10% to 90% at 1 Vpp, into 50 Ω load) Variable Duty Cycle (square) 0.001% to 99.999% (depending on frequency setting) Jitter (rms) Cycle to Cycle (square) 150 ps (1 Vpp, into 50 Ω load, typical) Ramp Symmetry 0% to 100% Ramp Linearity < 1% of peak output (triangle, ramp at 1 kHz, 1 Vpp, 100% symmetry) Pulse Pulse Width 16.3 ns minimum Rise/Fall Time 8.4 ns to 22.4 s (1 Vpp, 10% to 90%, into 50 Ω load) Duty Cycle Range 0.001% to 99.999% (depending on frequency setting) Overshoot < 3% (100 kHz, 1 Vpp) Jitter (rms) Cycle to Cycle 150 ps (1 Vpp, into 50 Ω load) Burst Waveform Sine, square, ramp, pulse, arbitrary, noise Type Cycle (1 to 1,000,000 cycles), infinite, gated Start/Stop Phase 0º to 360º Internal Period 1 µs to 1000 s Gated Source Internal, external trigger Trigger Source Internal, external, manual Phase Offset Range -360º to 360º Resolution 0.1º AM, FM & PM Modulation Characteristics Carrier(2) Sine, square, ramp, arbitrary Source Internal, external Modulation Waveform Sine, square, ramp, noise, arbitrary AM Modulation Depth 0% to 120% FM Frequency Deviation 0 to 0.5 x (maximum output frequency) PM Phase Deviation 0º to 360º ASK & FSK Modulation Characteristics Carrier(2) Sine, square, ramp, arbitrary Source Internal, external Modulation Waveform 50% duty cycle square waveform
Dual Channel Function/Arbitrary Waveform Generators 4060B Series www.bkprecision.comv120919 Specifications (continued) Model 4062B, 4063B, 4064B DSB-AM Modulation Characteristics Carrier(2) Sine, square, ramp, arbitrary Source Internal, external Modulation Waveform Sine, square, ramp, noise, arbitrary PWM Modulation Characteristics Source Internal, external Modulation Waveform(2) Sine, square, ramp, noise, arbitrary Internal Modulation Frequency 1 mHz to 1 MHz Sweep Characteristics Waveforms(2) Sine, square, ramp, arbitrary Sweep Shape Linear or logarithmic, up or down Sweep Time 1 ms to 500 s Sweep Trigger Internal, external, manual Harmonic Output Characteristics Maximum Order 16 Type Even, odd, all Auxiliary Input / Output Sync Out TTL compatible(4) Output impedance: 100 Ω (typical) Maximum frequency: 10 MHz Minimum pulse width: 50 ns (typical) Modulation Input ± 12 Vpp (typical) for 100% modulation Input impedance: 10 kΩ Frequency range: 0 kHz to 50 kHz Trigger Input Level TTL compatible(3) Slope Rising or falling, selectable Pulse Width > 100 ns Impedance > 100 kΩ Latency 100 ns maximum (sweep mode) 600 ns maximum (burst mode) Output Voltage Level TTL compatible(4) Pulse Width > 500 ns Impedance 100 Ω (typical) Maximum Frequency 1 MHz Reference Clock Input Frequency range: 10 MHz (typical) Minimum voltage input: 1.4 Vpp Input impedance: 5 kΩ Output Frequency range: 10 MHz (typical) Voltage level: 3.3 V (typical), 2 V (minimum) Output impedance: 50 Ω Frequency Counter Measurement Frequency, period, positive/negative pulse width, duty cycle Measurement Range 100 mHz to 200 MHz (DC coupling)
10 Hz to 200 MHz (AC coupling)
100 mVrms to ± 2.5 V (< 100 MHz, DC coupling) 200 mVrms to ± 2.5 V (100 MHz to 200 MHz, DC coupling) 100 mVrms to 5 Vpp (< 100 MHz, AC coupling) 200 mVrms to 5 Vpp (100 MHz to 200 MHz, AC coupling) Input Impedance 1 MΩ (typical) Coupling AC, DC, HF REJ (≥ 250 kHz filter) Environmental and Safety Temperature Operating: 32 °F to 104 °F (0 °C to 40 °C) Storage: -4 °F to 140 °F (-20 °C to 60 °C) Humidity < 86 °F (30 °C), ≤ 90 % RH Altitude Operating: below 10,000 ft (3,048 m) Storage: below 49, 212 ft (15,000 m) Electromagnetic Compatibility EMC Directive 2014/30/EU, EN61326-1:2013 Safety Low voltage directive (LVD) 2014/35/EU, EN61010-1:2010 General Display 4.3” TFT color (24-bit) LCD touch screen I/O Interfaces USBTMC device, LAN, USB host port Storage Memory 10 instrument settings AC Input 100 to 240 VAC ± 10 %, 50/60 Hz 100 to 120 VAC ± 10 %, 400 Hz Power Consumption 50 W maximum Dimensions Weight 7.6 lbs (3.43 kg) Warranty 3 years Standard Accessories AC power cord, user manual (downloadable), USB type A-to-B cable, BNC coaxial cable, certificate of calibration Optional Accessories USB-to-GPIB adapter (model AK40G) (2) Modulation schemes not available in DC mode. (3) VIH = 2 V to 5.5 V, VIL = 0.5 V to 0.8 V (4) VOH = 3.8 V (IOH = -8 mA), VOL = 0.44 V (IOL = 8 mA)