UTC4053 UTC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

UTC UNISONIC TECHNOLOGIES CO., LTD. 1 www.unisonic.com.tw QW-R502-036,A ANALOG MULTIPLEXERS/ DEMULTIPLEXERS

DESCRIPTION

The UTC 4053 are Triple SPDT analog multiplexers for application as digitally–controlled analog switches.

FEATURES

  • Analog Voltage Range (VDD – VEE) = 3.0 ~ 18 V Note: VEE must be≦VSS * Linearized Transfer Characteristics * Pin–to–Pin Replacement for CD4053 DIP-16 SOP-16 TSSOP-16 *Pb-free plating product number: 4053L PIN CONFIGURATIONS Y1 1 Z INH VEE VSS X VDD Y A B C UTC 4053

UTC UNISONIC TECHNOLOGIES CO., LTD. 2 www.unisonic.com.tw QW-R502-036,A UTC 4053 Triple 2–Channel Analog Multiplexer/Demultiplexer

6 INHIBIT

C B A 14 Y X COMMONS OUT/IN V DD = PIN 16 VSS = PIN 8 VEE = PIN 7 CONTROLS SWITCHES IN/OUT Note: Control Inputs referenced to VSS, Analog Inputs and Outputs reference to VEE. VEE must be≦VSS. ABSOLUTE MAXIMUM RATINGS* PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage (Referenced to VEE, VSS≧VEE) VDD -0.5 ~ +18.0 V Input or Output Voltage (DC or Transient) (Referenced to VSS for Control Inputs and VEE for Switch I/O) Vin, Vout -0.5 ~ V DD +0.5 V Input Current (DC or Transient), per Control Pin I in ±10 mA Switch Through Current I SW ±25 mA Power Dissipation. Per Package** P D 500 mW Storage Temperature T stg -65 ~ +150 ℃ Lead Temperature (8 - Second Soldering) T Lead 260 ℃ * Maximum Ratings are those values beyond which damage to the device may occur. ** Temperature Derating: “DIP and SOP” Packages: – 7.0 mW/℃ From 65 ℃ ~ 125 ℃

ELECTRICAL CHARACTERISTICS

(Ta=25℃, unless otherwise indicated.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP# MAX UNIT SUPPLY REQUIREMENTS (Voltages Referenced to VEE) Power Supply Voltage Range V DD VDD – 3.0≧VSS≧VEE 3.0 18 V Quiescent Current per Package I DD Control Inputs: Vin = VSS or VDD Switch I/O: VEE ≦VI/O ≦VDD, and ∆Vswitch≦500mV* VDD=5.0V VDD=10V VDD=15V 0.005 0.010 0.015 5.0 µA Total Supply Current (Dynamic Plus Quiescent, Per Package) ID(AV) Ta=25℃ only (The channel component, (Vin - Vout)/Ron, is not included.) V DD=5.0V VDD=10V VDD=15V (0.07 µA/kHz) f + I DD Typical (0.20 µA/kHz) f + IDD (0.36 µA/kHz) f + IDD µA

UTC UNISONIC TECHNOLOGIES CO., LTD. 3 www.unisonic.com.tw QW-R502-036,A PARAMETER SYMBOL TEST CONDITIONS MIN TYP# MAX UNIT CONTROL INPUTS – INHIBIT A, B, C (Voltages Referenced to VSS) Low – Level Input Voltage V IL Ron= per spec, Ioff = per spec VDD=5.0V VDD=10V VDD=15V 2.25 4.50 6.75 1.5 3.0 4.0 V High – Level Input Voltage V IH Ron= per spec, Ioff = per spec VDD=5.0V VDD=10V VDD=15V 3.5 7.0 2.75 5.50 8.25 V Input Leakage Current Iin Vin= 0 or V DD, VDD=15V ±0.00001 ±0.1 µA Input Capacitance Cin 5.0 7.5 pF SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE) Recommended Peak–to–Peak Voltage Into or Out of the Switch VI/O Channel On or Off 0 V DD V PP Recommended Static or Dynamic Voltage Across the Switch** (Figure 3) ∆Vswitch Channel On 0 600 mV Output Offset Voltage V OO Vin = 0V, No Load 10 µV ON Resistance Ron ∆Vswitch≦500mV* Vin = VIL or VIH (Control), and Vin = 0 to VDD (Switch) VDD=5.0V VDD=10V VDD=15V 250 120 1050 500 280 Ω ΔON Resistance Between Any Two Channels in the Same Package ∆Ron VDD=5.0V VDD=10V VDD=15V Ω Off–Channel Leakage Current (Figure 8) Ioff Vin = VIL or VIH (Control) Channel to Channel or Any One Channel, V DD=15V ±0.05 ±100 nA Capacitance, Switch I/O C I/O Inhibit = V DD 10 pF Capacitance, Common O/I C O/I Inhibit = V DD 17 pF Capacitance, Feedthrough (Channel Off) C I/O Pins Not Adjacent Pins Adjacent 0.15 0.47 pF #Data labeled “Typ” is not to be used for design purposes, but is intended as an indication of the IC’s potential performance. * For voltage drops across the switch ( ∆Vswitch) > 600 mV ( > 300 mV at high temperature), excessive V DD current may be drawn, i.e. the current out of the switch may contain both V DD and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded. (See second page of this data sheet.)

17 MHz

10 R1 = 1 kΩ, RL = 10 kΩ Control

  • The formulas given are for the typical characteristics only at 25℃.

Figure 1. Switch Circuit Schematic

UTC UNISONIC TECHNOLOGIES CO., LTD. 5 www.unisonic.com.tw QW-R502-036,A TRUTH TABLE Control Inputs Select ON Switches Inhibit C B A UTC 4053 0 0 0 0 0 1 0 1 0 0 1 1 Z 0 Y 0 X 0 Z 0 Y 0 X 1 Z 0 Y 1 X 0 Z 0 Y 1 X 1 1 0 0 1 0 1 1 1 0 1 1 1 Z 1 Y 0 X 0 Z 1 Y 0 X 1 Z 1 Y 1 X 0 Z 1 Y 1 X 1 1 x x x None x = Don’t Care Figure 2. UTC 4053 Functional Diagram VEE VDD16 VSS8 7 B 10 C A 11 6INH LEVEL CONVERTER BINARY TO 1 - OF - 2 DECODER WITH INHIBIT X0 12 X1 13 Y0 2 Y1 1 Z0 5 Z1 3 14 X 15 Y 4 Z -100 300 350 200 INPUT VOLTAGE, Vin (VOLTS) 250 150 100 300 350 200 INPUT VOLTAGE, Vin (VOLTS) "ON" RESISTANCE, RON (OHMS)250 150 100 "ON" RESISTANCE, RON (OHMS) VDD = 7.5 V VEE = - 7.5 V VDD = 5.0 V VEE = -5.0 V Ta =25℃ Ta =25℃ -100 300 350 200 INPUT VOLTAGE, Vin (VOLTS) "ON" RESISTANCE, RON (OHMS)250 150 100 VDD = 2.5 V VEE = - 2.5 V Ta =25℃

UTC UNISONIC TECHNOLOGIES CO., LTD. 6 www.unisonic.com.tw QW-R502-036,A UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.