405 BITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

BI Technologies Corporation

4200 Bonita Place, Fullerton, CA 92835 USA

Phone: 714 447 2345 Website: www.bitechnologies.com Linear Actuation, Low Cost Conductive Plastic Precision Potentiom eter / Position Sensor M odel 405 Series ELECTRICAL 1 1 Specifications subject to change without notice. 2 Linearity is measured between 1% and 99% of input voltage. 3 Special hybrid TCR available to ±100 ppm/°C for narrower range of resistance. 4 Measured with 10 VDC CW to CCW and slider at 50% of electrical travel. Resistance Range see Table 1 Standard Resistance Tolerance ±20% Minimum Practical Resistance Tolerance ±10% Independent Linearity 2 see Table 1 Minimum Practical Independent Linearity see Table 1 Input Voltage 400 VDC maximum, not to exceed power rating Power Rating see Table 1 for Watts at 85°C, derating to 0 at 125°C Dielectric Withstanding Voltage 1,000 V rms Insulation Resistance 1,000 Megohms minimum at 500 VDC Output smoothness 0.1% maximum at 10” to 18” per minute Actual Electrical Travel see Table 1 Electrical Continuity Travel within mechanical travel End Voltage maximum 0.5% of input voltage Resolution essentially infinite Temperature Coefficient of Resistance 3 -400 +/-400 ppm/°C typical Temperature Coefficient of Output Voltage 4 ±10 ppm/°C typical July 29, 2014 Model 405 page 1 of 3 Model # Shaft Termination Style Weight (grams) 405 1/8” plain Wire Leads 28 + (16 x mechanical travel) M ODEL STYLES AVAILABLE Total Mechanical Travel see Table 1 Actuating Force 10 oz. maximum Shaft Rotation continuous Backlash 0.003” maximum Static Stop Strength 10 lb. minimum M ECHANICAL RoH S 2 com pliant Pb

BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com July 29, 2014 Model 405 page 2 of 3 ENVIRONM ENTAL (M IL-PRF-39023) ORDERING INFORM ATION Model Series Resistance Prefix Resistance Value Optional Feature Code (see table) Optional Non-standard Tolerance 405 200 R 10K T10 L1.0 2G FEATURE CODES M odel 405 Linearity Tape LT Two Gangs (dual section) 2G Threaded shaft (5-40 UNC-3A) TS Operating Temperature Range -40°C to +125°C dynamic, -55°C to +125°C static Load Life 5 million shaft actuations at rated power & 70°C, maximum 10% ΔR Electrical Travel (see Table 1) Electrical Travel (Inches) 1” 2” 3” Ordering # 100 200 300 Standard Resistance Range (Ohms) 1K to 300K 2K to 600K 3K to 900K Hybrid (low TCR) resistance range (Ohms) 400 to 30K 700 to 60K 1K to 90K Standard Independent Linearity ±1.5% ±1.5% ±1.0 Minimum Practical Independent Linearity 1.0 1.0 0.75 Power Rating (Watts) 0.75 1.0 1.5 Mechanical Travel (Inches) 1.060” 2.060” 3.060” Table 1 CIRCUIT DIAGRAM Optional Non-standard Linearity

BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com July 29, 2014 Model 405 page 3 of 3 M odel 405 OUTLINE DRAW ING