4052-D16-T

4052 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

UNISONIC TECHNOLOGIES CO., LTD

4052 CMOS IC

w w w . u n i s o n i c . c o m . t w 1 of 6 Copyright © 2010 Unisonic Technologies Co., LTD QW-R502-013.D DIFFERENTIAL 4-CHANNEL ANALOG MULTIPLEXERS/ DEMULTIPLEXERS „ DESCRIPTION The UTC 4052 is differential 4-channel analog multiplexers/ demultiplexers for application as digitally–controlled analog switches. The device has two binary control inputs and an inhibit input. It feature low ON impedance and very low OFF leakage current. Control of analog signals up to the complete supply voltage range can be achieved. „ FEATURES * Wide Analog Voltage Range: VDD–VEE = 3V~18V. (Note: VEE must be≦VSS) * Break-Before-Make Switching Eliminates Channel Overlap. * Linearized Transfer Characteristics * Implement an DP4T Switch Effectively. * Pin to Pin Replacement for CD4052 „ ORDERING INFORMATION Ordering Number Normal Lead Free Plating Halogen Free Package Packing 4052-D16-T 4052L-D16-T 4052G-D16-T DIP-16 Tube 4052-P16-R 4052L-P16-R 4052G -P16-R TSSOP-16 Tape Reel 4052-S16-T 4052L-S16-T 4052G-S16-T SOP-16 Tube 4052-S16-R 4052L-S16-R 4052G -S16-R SOP-16 Tape Reel

UNISONIC TECHNOLOGIES CO., LTD 2 of 6 www.unisonic.com.tw Q W - R 5 0 2 - 0 1 3 . D „ PIN CONFIGURATION „ PIN DESCRIPTION PIN No. SYMBAL NAME AND FUNCTION 13, 3 X,Y Commons Input/Output

6 INH Inhibit Input

7 V EE Supply Voltage

8 V SS Ground

10,9 A,B Binary Control Inputs 12,14,15,11 X0~X3 X Channel Inputs/Outputs 1,5,2,4 Y0~Y3 Y Channel Inputs/Outputs

16 V DD Positive Supply Voltage

Note: Control Inputs referenced to VSS. Analog Inputs and Outputs reference to VEE. VEE must be ＜VSS.

UNISONIC TECHNOLOGIES CO., LTD 3 of 6 www.unisonic.com.tw Q W - R 5 0 2 - 0 1 3 . D „ ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage (Referenced to VEE, VSS≧VEE) VDD -0.5 ~ +18 V Input or Output Voltage (DC or Transient) (Referenced to VSS for Control Inputs and VEE for Switch I/O) VIN, VOUT -0.5 ~ VDD +0.5 V Input Current (DC or Transient), per Control Pin I IN ±10 mA Switch Through Current I SW ±25 mA 700 mW Power Dissipation Derating above 65°C PD 7 mW/°C Junction Temperature T J 125 °C Operating Temperature Range T OPR -40 ~ +125 °C Storage Temperature Range T STG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. „ ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT SUPPLY REQUIREMENTS (Voltages Referenced to VEE) Power Supply Voltage Range V DD VDD – 3≧VSS≧VEE 3 18 V VDD=5V 0.005 5 µA VDD=10V 0.010 10 µAQuiescent Current per Package VDD=15V IQ Control Inputs: VIN = VSS or VDD Switch I/O: VEE ≦VI/O ≦VDD, and ΔVsw≦500mV(Note 2) 0.015 20 µA VDD=5V (0.07 µA/kHz) f + I Q µA VDD=10V (0.20 µA/kHz) f + I Q µA Total Supply Current (Dynamic Plus Quiescent, Per Package) V DD=15V ID(AV) Ta=25°C only (The channel component, (VIN-VOUT)/RON, is excluded.) (0.36 µA/kHz) f + IQ µA SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE) Recommended Peak to Peak Voltage Into or Out of the Switch VI/O Channel On or Off 0 V DD VPP Recommended Static or Dynamic Voltage Across the Switch (Note2) ΔVsw Channel On 0 600 mV Output Offset Voltage V O(OFF) VIN = 0V, No Load 10 µV VDD=5V 250 1050 Ω VDD=10V 120 500 Ω ON Resistance VDD=15V RON ΔVsw≦500mV (Note2) VIN = VIL or VIH (Control), and VIN = 0 to VDD (Switch) 80 280 Ω VDD=5V 25 70 Ω VDD=10V 10 50 Ω ΔON Resistance Between Any Two Channels in the Same Package VDD=15V ΔRON 10 45 Ω Off Channel Leakage Current I OFF VIN = VIL or VIH (Control) Channel to Channel or Any One Channel, V DD=15V ±0.05 ±100 nA Capacitance, Switch I/O C I/O Inhibit = V DD 10 pF Capacitance, Common O/I C O/I Inhibit = V DD 17 pF Capacitance, Feedthrough (Channel Off) C I/O Pins Not Adjacent Pins Adjacent 0.15 0.47 pF CONTROL INPUTS – INHIBIT A, B, C (Voltages Referenced to VSS) VDD=5V 2.25 1.5 V VDD=10V 4.50 3.0 V Low Level Input Voltage VDD=15V VIL R ON= per spec, IOFF = per spec 6.75 4.0 V VDD=5V 3.5 2.75 V VDD=10V 7.0 5.50 V High Level Input Voltage VDD=15V VIH R ON= per spec, IOFF = per spec 11 8.25 V Input Leakage Current I LEAK V IN= 0 or VDD, VDD=15V ±0.00001 ±0.1 µA Input Capacitance C IN 5.0 7.5 pF

UNISONIC TECHNOLOGIES CO., LTD 4 of 6 www.unisonic.com.tw Q W - R 5 0 2 - 0 1 3 . D „ DYNAMIC ELECTRICAL CHARACTERISTICS (CL = 50pF, Ta=25°C, VEE≦VSS, unless otherwise specified) PARAMETER SYMBOL VDD–VEE Vdc TEST CONDITIONS MIN TYP MAX UNIT 30 75 ns 12 30 ns Propagation Delay Times Switch Input to Switch Output (R L = 10 kΩ) tPLH, tPHL t PLH, tPHL =(0.17 ns/pF)CL + 21.5ns tPLH, tPHL =(0.08 ns/pF)CL + 8.0ns tPLH, tPHL =(0.06 ns/pF)CL + 7.0ns 10 25 ns 300 600 ns 155 310 ns Inhibit to Output tPHZ, tPLZ tPZH, tPZL L=10kΩ, VEE=VSS) Output “1” or “0” to High Impedance, or High Impedance to “1” or “0” Level 125 250 ns 325 650 ns 130 260 ns Control Input to Output t PLH, tPHL R L = 10 kΩ, VEE = VSS 90 180 ns Total Harmonic Distortion THD 10 R L = 10KΩ, f = 1 kHz, VIN = 5 VPP 0.07 % Bandwidth BW 10 RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p, CL = 50pF, 20 Log (VOUT/VIN) = -3dB)

17 MHz

Attenuation 10 RL=1KΩ, VIN = 1/2 (VDD–VEE) p–p fIN = 30MHz -50 dB Channel Separation 10 RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p fIN = 3MHz -50 dB Crosstalk, Control Input to Common O/I

10 R1 = 1kΩ, RL = 10kΩ Control

tTLH = tTHL = 20ns, Inhibit = VSS 75 mV Note: 1. Data of “TYP” is intended as an indication of the IC’s potential performance. 2. For voltage drops across the switch( ΔVsw)>600mV (>300mV at high temperature), excessive VDD current may be drawn, i.e. the current out of the switch may contain both VDD and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded.

UNISONIC TECHNOLOGIES CO., LTD 5 of 6 www.unisonic.com.tw Q W - R 5 0 2 - 0 1 3 . D „ TEST CIRCUIT VDD VEE VEE VDDVDD VDD OUT/IN OUT/ININ/OUT CONTROL IN/OUT LEVEL CONVERTED CONTROL Switch Circuit Schematic „ TRUTH TABLE TRUTH TABLE Control Inputs Inhibit B A Select ON Switches

1 XX None

UTC 4052 Functional Diagram INH A B 8V s s 7 V EE X Y

16 V DD

• X=Don't Care

UNISONIC TECHNOLOGIES CO., LTD 6 of 6 www.unisonic.com.tw Q W - R 5 0 2 - 0 1 3 . D „ TYPICAL CHARACTERISTICS "ON" Resistance, RON(Ω) "ON" Resistance, RON(Ω) "ON" Resistance, RON(Ω) "ON" Resistance, RON(Ω) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.