4030B

HCC4030B STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

DESCRIPTION

.MEDIUM-SPEED OPERATION – t PHL =tPLH = 60ns (typ.) @ CL = 50pF and VDD –V SS = 10V .LOW OUTPUT IMPEDANCE : 500 Ω (typ.) @ VDD –V SS = 10V .QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE .STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS .5V, 10V, AND 15V PARAMETRIC RATINGS .INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE .100% TESTED FOR QUIESCENT CURRENT .MEETS ALL REQUIREMENTS OF JEDECTEN- TATIVE STANDARDN °13A, ”STANDARD SPE- CIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” The HCC4030B (extended temperature range) and HCF4030B (intermediate temperature range) are monolithic integrated circuit, available in 14-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4030B types consist of four inde- pendent exclusive-OR gates integrated on a single monolithic silicon chip. Each exclusive-OR gate con- sists of four n-channel and four p-channel enhance- ment-type transistors. All inputs and outputs are protected against electrostatic effects. EY (Plastic Package) F (Ceramic Frit Seal Package) (Micro Package) (Plastic Chip Carrier) ORDER CODES : HCC4030 BF HCF4030BM1 HCF4030B EY HCF4030BC1 PIN CONNECTIONS

Symbol Parameter Value Unit V DD * Supply Voltage :HCC Types HCF Types – 0.5 to + 20 – 0.5 to + 18 V V V i Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA P tot Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package-temperature Range 200 100 mW mW Top Operating Temperature :HCC Types HCF Types – 55 to + 125 –4 0t o+8 5 Tst g Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sec- tions of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. FUNCTIONAL DIAGRAM TRUTH TABLE One of Four Identical Gates ABJ Where ”1” = High level ”0” = Low level. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V DD Supply Voltage :HCC Types HCF Types 3t o1 8 3t o1 5 V V V I Input Voltage 0 to V DD V T op Operating Temperature :HCC Types HCF Types – 55 to + 125 –4 0t o+8 5 HCC/HCF4030B

STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Value V I V O |IO |V DD T Low * 25 °CT High *Symbol Parameter Unit IL Quiescent Current HCC Types 0/ 5 5 1 0.02 1 30 µA 0/10 10 2 0.02 2 60 0/15 15 4 0.02 4 120 0/20 20 20 0.04 20 600 HCF Types 0/ 5 5 4 0.02 4 30 0/10 10 8 0.02 8 60 0/15 15 16 0.02 16 120 V OH Output High Voltage 0/ 5 < 1 5 4.95 4.95 4.95 V0/10 < 1 10 9.95 9.95 9.95 0/15 < 1 15 14.95 14.95 14.95 V OL Output Low Voltage 5/0 < 1 5 0.05 0.05 0.05 V10/0 < 1 10 0.05 0.05 0.05 15/0 < 1 15 0.05 0.05 0.05 V IH Input High Voltage V1/9 < 1 10 7 7 7 1.5/13.5 < 1 15 11 11 11 V IL Input Low Voltage V9/1 < 1 10 3 3 3 13.5/1.5 < 1 15 4 4 4 IOH Output Drive Current HCC Types mA HCF Types I OL Output Sink Current HCC Types 0/ 5 0.4 5 0.64 0.51 1 0.36 mA HCF Types 0/ 5 0.4 5 0.52 0.44 1 0.36 I IH,IIL Input Leakage Current HCC Types 0/18 Any Input µA HCF Types 0/15 15 ± 0.3 ±10–5 ± 0.3 ± 1 C I Input Capacitance Any Input 5 7.5 pF *T Low =–5 5 °Cf o rHCC device : – 40°C forHCF device. *T High = + 125°Cf o rHCC device : + 85°Cf o rHCF device. HCC/HCF4030B

DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb =2 5°C, CL = 50pF, RL = 200kΩ , typical temperature coefficient for all VDD = 0.3%/°C values, all input rise and fall time = 20ns) ValueSymbol Parameter Test Conditions V CC (V) Min. Typ. Max. Unit tPLH ,tPHL Propagation Delay Time 5 140 280 ns10 65 130 15 50 100 tTLH ,tTHL Transition Time 5 100 200 ns10 50 100 15 40 80 Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Charac- teristics. Typical Output High (source) Current Charac- teristics. Minimum Output High (source) Current Charac- teristics. HCC/HCF4030B

EVEN-PA RITY-BIT GENERATOR (1-3/4 xHCC/HCF4030B ). EVEN-PAR ITY-CHECKER (2 xHCC/HCF4030B ). ODD-PARITY-BIT GENERATOR (2 xHCC/HCF4030B ). ODD-PARITY CHECKER (2 xHCC/HCF4030B ). HCC/HCF4030B

8-BIT TWO’S COMPLEMENT ADDER-SUBSTRACTOR TYPICAL APPLICATIONS (continued) HCC/HCF4030B

The two’s complement adder-substractor can add or substract any two of the numbers in table 1. For exam- ple : Table 1 :Two’s Complement Numbers and Their Equivalent Decimal Values. a) 2 SIGN + = BIT – 5 X 00000010 2 + Y 11111011 – 5 + CI 0 S 0 11111101 = – 3 CO TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Leakage Current. SIGN b) –2 BIT – = X 1 1111110 – 2 + – 5 Y 1 1111011 – 5 Y 0 0000100 + CL 1 S 1 00000011 = 3 CO X8 X7 X6 X5 X4 X3 X2 X1 X8 X7 X6 X5 X4 X3 X2 X1 00000000=011111111= - 1 00000001=111111110= - 2 00000010=211111101= - 3 00000011=311111100= - 4 11111011= - 5 01111110= 1 2 6 10000001= -127 01111111= 1 2 7 10000000= -128 HCC/HCF4030B

Plastic DIP14 MECHANICAL DATA DIM. mm inch a1 0.51 0.020 B 1.39 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L 3.3 0.130 Z 1.27 2.54 0.050 0.100 P001A HCC/HCF4030B

Ceramic DIP14/1 MECHANICAL DATA DIM. mm inch A 20 0.787 B 7.0 0.276 D 3.3 0.130 E 0.38 0.015 e3 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N 10.3 0.406 P 7.8 8.05 0.307 0.317 Q 5.08 0.200 P053C HCC/HCF4030B

DIM. mm inch A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S8 ° (max.) P013G HCC/HCF4030B

DIM. mm inch A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A HCC/HCF4030B

Information furnished is believed to be accur ate and reliable. However, SGS-THOMSON Microelectronics assumes no respon sability for the consequ ences of use of such information nor for any infringem ent of paten ts or other rights of third parties which may results from its use. No license is grante d by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelec tronics. Specifications mentioned in this publication are subject to chan ge without notice. This publicat ion superse des and replaces all information previou sly supplie d. SGS-THOMSON Microelec tronics produ cts are not autho rized for use as critical compone nts in lifesupport devices or system s without expres s written approval of SGS-THOMSON Microelectonics.  1996 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserve d SGS-THOMSONMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malays ia - Malta - Morocco - The Netherlands - Singap ore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdo m - U.S.A HCC/HCF4030B