401-LFPA-4.8 WECO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
401-LFPA-4,8/-6,3Tab/solder connector block 03.19WECO | www.wecogroup.com 6,3 4,8 The combined tab/solder connector blocks are used primarily as connectors, cable splitter or as a base in electrical appliances and in automotive. In the -LF version of the Type 401 a solder connection is located on the opposite side of the flat plug. The solder tags protrude approximately 8,5 mm from the housing. On the solder tag a flat plug sleeve B 2.8 x 0.8 can be inserted. Depending on the application, this type is available with flat connectors 4,8 mm or 6,3 mm width in 1 to 12 pole design. The insulation on the plug side can be done with our insulating ISO 187 on the tab 4,8 mm and ISO 110 with the solder joints. The tab connectors are suitable for flat plugs according to DIN 46247. Part Numbers No. of poles 401-LFPA-4,8 401-LFPA-6,3 Length A * PU 1 11.833.002 31.833.010 11,00 2500 2 12.833.002 32.833.010 23,00 1500 3 13.833.002 33.833.010 35,00 12,00 1000 4 14.833.002 34.833.010 47,00 24,00 800 5 15.833.002 35.833.010 59,00 36,00 200 6 16.833.002 36.833.010 71,00 48,00 250 7 17.833.002 37.833.010 83,00 60,50 250 8 18.833.002 38.833.010 95,00 72,50 250 9 19.833.002 39.833.010 107,00 84,50 200 10 20.833.002 40.833.010 119,00 96,50 150 11 21.833.002 41.833.010 131,00 108,50 150 12 22.833.002 42.833.010 142,00 120,50 150 * = Distance of the two outermost mounting holes General Information Pitch 12 mm No. of poles 1 - 12 Technical Data Overvoltage Category III III II Pollution Severity Level 3 2 2 Rated Voltage 400 V 630 V 1000V Rated Impulse Voltage 6 kV 6 kV 6 kV Rated Insulation Voltage 450 V acc. to EN 60998-1 Rated Current 15 A: with receptacle 4,8; wire 2,5 mm² (14 AWG)
20 A: with receptacle 6,3; wire 6,0 mm² (10 AWG)
Other specifications Rated values apply to use in combination with insulated underlay. Material Moulding PA, natural, V-2 Comparative Tracking Index CTI ≥ 600 Insulating Group I Temperature Range -40°C up to 100°C Tab Tin plated brass Approvals Current [A] Voltage [V] Group AWG [Nm] 15 300 B max. 10 [1][2] 300 150 300 B C D,E max. 10 max. 10 max. 10 [1] [1] [1] [1] max. 14 AWG for solder side [2] max. 16 AWG for solder side Options / Accessories Consecutive numbering Special marking according to drawing Insulating sleeves ISO-110 for solder points and ISO-187 for receptacles Other tab connector variants available upon request, e.g. for the transition from 4.8 to 6.3