400AA002M08 GLENAIR | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

www.glenair.com E-Mail: sales@glenair.comSeries 40 - Page 10 GLENAIR, INC.• 1211 AIR WAY• GLENDALE, CA 91201-2497• 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 Shown with Style L Strain Relief

400 F S 002 M 16 06 L 6

A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G, L) Cable Entry (T ables V, VI) Shell Size (Table I) Finish (Table II) B (Table I) A Thread (Table I) CONNECTOR DESIGNATORS A-B*-C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 DIRECT COUPLING STYLE 2 (STRAIGHT See Note 1) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) E (Table IV) F (Table IV) J (Table III) J (Table III) G (Table IV) H (Table IV) Ground Spring Shown with Style G Nut STYLE L Light Duty (Table VI) .850 (21.6) Approx. Cable Range L STYLE G Light Duty (Table V) .072 (1.8) Approx. KCable Entry STYLE F Light Duty (Table VI) LCable Range .416 (10.5) Approx. B (Table I) B (Table I) 400-002 TAG® Ring Backshell with Strain Relief Direct Coupling - Low Profile

www.glenair.com E-Mail: sales@glenair.comSeries 40 - Page 11 GLENAIR, INC.• 1211 AIR WAY• GLENDALE, CA 91201-2497• 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 Dash No. K Max .545 (13.8) .670 (17.0) .795 (20.2) .920 (23.4) 1.045 (26.5) 1.170 (29.7) 1.295 (32.9) 1.420 (36.1) 1.670 (42.4) Cable Entry Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) TABLE V: CABLE ENTRY Cable RangeL Max .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) Dash No. Min .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .625 (15.9) .750 (19.1) .875 (22.2) Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) TABLE VI: CABLE ENTRY TABLE IV: ELBOW DIMENSIONS G Max .636 (16.2) .709 (18.0) .734 (18.6) .829 (21.1) .990 (25.1) 1.000 (25.4) 1.325 (33.7) 1.325 (33.7) 1.325 (33.7) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.250 (57.2) E Max .630 (16.0) .630 (16.0) .692 (17.6) .755 (19.2) .848 (21.5) 1.036 (26.3) 1.130 (28.7) 1.130 (28.7) 1.130 (28.7) See inside back cover fold-out or pages 13 and 14 for Tables I and II. Elbow Size F Max 1.720 (43.7) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.970 (50.0) 2.170 (55.1) 2.310 (58.7) 2.310 (58.7) 2.310 (58.7) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. Shell Size A-D-E-F J-H-L-S 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) B-G-K 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.416 (36.0) 1.416 (36.0) 1.416 (36.0) 1.416 (36.0) 1.416 (36.0) 1.416 (36.0) 1.416 (36.0) 1.416 (36.0) 1.687 (42.9) J Max - Conn. Designator TABLE III: FRONT ADAPTER C 1.735 (44.1) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 400-002 TAG® Ring Backshell with Strain Relief Direct Coupling - Low Profile