ZB4BS94412 SCHNEIDER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Head for emergency switching off push button, Harmony XB4, red Ø 40 stop, Ø22 mm trigger and latching key release ZB4BS94412 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 151.50 USD Main Range of product Harmony XB4 Product or Component Type Head for emergency switching off push-button Device short name ZB4 Bezel material Chromium plated metal Mounting diameter 0.87 in (22 mm) Sale per indivisible quantity 1 Shape of signaling unit head Round Type of operator trigger action and mechanical latching Reset Key release Operator profile Red mushroom Ø 40 mm, unmarked Type of Keylock Ronis 421E Key withdrawal position Center Head type Standard Complementary CAD overall width 1.57 in (40 mm) CAD overall height 1.57 in (40 mm) CAD overall depth 3.11 in (79 mm) Product Weight 0.22 lb(US) (0.098 kg) Resistance to high pressure washer 1015.26 psi (7000000 Pa) 131 °F (55 °C) 0.1 m Mechanical durability 300000 cycles Electrical composition code C7 4 single front mounting C8 4 single and double front mounting C11 3 single front mounting C15 1 single front mounting C10 4 single and double front mounting Device presentation Basic element Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications * Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price. Oct 18, 2021
Ambient Air Temperature for Storage Ambient Air Temperature for Operation Electrical shock protection class Class I IEC 61140 IP degree of protection IP66 IEC 60529 IP67 IP69 IP69K NEMA degree of protection NEMA 13 NEMA 4X NEMA 4 NEMA 12 IK degree of protection IK03 IEC 50102 Standards EN/IEC 60947-5-1 GB 14048.5 EN/ISO 13850 EN/IEC 60947-5-5 IEC 60364-5-53 EN/IEC 60947-5-4 EN/IEC 60947-1 UL 508 EN/IEC 60204-1 CSA C22.2 No 14 JIS C8201-5-1 JIS C8201-1 Product Certifications LROS (Lloyds register of shipping) CSA UL Listed DNV BV GL Vibration resistance 5 gn 2…500 Hz)IEC 60068-2-6 Shock resistance 30 gn 18 ms) half sine wave acceleration IEC 60068-2-27 50 gn 11 ms) half sine wave acceleration IEC 60068-2-27 Ordering and shipping details Category 22468 - PUSHBUTTONS,22MM(METAL) NEW Discount Schedule CS2 GTIN 3389110122985 Nbr. of units in pkg. 1 Package weight(Lbs) 3.46 oz (98 g) Returnability No Country of origin CZ Packing Units Unit Type of Package 1 PCE Package 1 Height 3.46 in (8.8 cm) Package 1 width 1.73 in (4.4 cm) Package 1 Length 2.13 in (5.4 cm) Offer Sustainability Sustainable offer status Green Premium product Oct 18, 2021
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information Contractual warranty Warranty 18 months Oct 18, 2021
Oct 18, 2021
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board Connection by Faston Connectors (1) Diameter on finished panel or support (2) 40 mm min. / 1.57 in. min. (3) 30 mm min. / 1.18 in. min. (4) Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0 +0.4 / 0.88 in. 0 +0.016) (5) 45 mm min. / 1.78 in. min. (6) 32 mm min. / 1.26 in. min. Oct 18, 2021
Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer’s Side) A: 30 mm min. / 1.18 in. min. B: 40 mm min. / 1.57 in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: 30 mm min. B: 40 mm min. Dimensions in in. Oct 18, 2021
A: 1.18 in. min. B: 1.57 in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max. Installation Precautions
- Minimum thickness of circuit board: 1.6 mm / 0.06 in.
- Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
- Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws: ○ with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) Panel (2) Printed circuit board Mounting of Adapter (Socket) ZBZ 01•
- 1 2 elongated holes for ZBZ 006 screw access
- 3 8 × Ø 1.2 mm / 0.05 in. holes
- 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
- 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01• Oct 18, 2021
Electrical Composition Corresponding to Code C7 Oct 18, 2021
Electrical Compositions Corresponding to Code C8 Oct 18, 2021
Electrical Compositions Corresponding to Code C10 Oct 18, 2021
Oct 18, 2021
Electrical Composition Corresponding to Code C15
1 N/O
1 N/C
1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C
Oct 18, 2021
Oct 18, 2021