4004 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Double Coated Urethane Foam Tapes 4004 • 4008 • 4016 • 4026 4032 • 4052 • 4056 • 4085 Product Data Sheet Product Description Products May, 2006 3M™ Double Coated Urethane Foam Tapes are conformable foams that offer high shear strength and are available with either a high temperature holding acrylic adhesive system or a rubber adhesive system for bonding to various types of surfaces for mounting, joining and holding. Note: The user is responsible for determining whether the tape is fit for a particular purpose and suitable for user’s method of application. 3M™ Double Coated Urethane Foam Tape 4004 3M™ Double Coated Urethane Foam Tape 4008 3M™ Double Coated Urethane Foam Tape 4016 3M™ Double Coated Urethane Foam Tape 4026 3M™ Double Coated Urethane Foam Tape 4032 3M™ Double Coated Black Urethane Foam Tape 4052 3M™ Double Coated Black Urethane Foam Tape 4056 3M™ Double Coated Urethane Foam Tape 4085 1/4 in. 1/8 in. 1/16 in. 1/16 in. 1/32 in. 1/32 in. 1/16 in. 0.045 in. (6.4 mm) thick (3.2 mm) thick (1.6 mm) thick (1.6 mm) thick (0.8 mm) thick (0.8 mm) thick (1.6 mm) thick (1.1 mm) thick

3M ™ Double Coated Urethane Foam Tapes 4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085 Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Double Coated Urethane Foam Tape Adhesive Type:* Units 4004 100 4008 100 4016 100 4026 100 Adhesive Carrier: Polyurethane Foam Polyurethane Foam Polyurethane Foam Polyurethane Foam Thickness: Nominal Thickness: Tolerance: Color: Release Liner: Liner Color: Approximate Density: (Foam Only) Standard Length: Maximum Length: Available Width: Normal Slitting Tolerance: Normal Tensile: (“T” Block) 1 in 2 (6.45 cm 2) Jaw Speed 2 in/min (50 mm/min) Static Shear: inch (mm) inch (mm) inch (mm) lb/ft (kg/m yard (meter) yard (meter) inch (mm) inch (mm) psi (kPa) 0.250 (6.4) 0.215-0.285 (5.46-7.24) Natural 0.003 (0.08) Green Plaid (190) 18 (16.5) 25 (23) 46 (1168) ± 1/32 (± 0.8) 12 (85) 0.125 (3.2) 0.110-0.150 (2.79-3.81) Natural 0.003 (0.08) Green Plaid (240) 36 (32.9) 50 (45.7) 46 (1168) ± 1/32 (± 0.8) 25 (170) 0.0625 (1.6) 0.045-0.080 (1.142-2.03) Natural 0.003 (0.08) Green Plaid (175) 36 (32.9) 100 (91) 46 (1168) ± 1/32 (± 0.8) 50 (345) 0.0625 (1.6) 0.045-0.080 (1.142-2.03) Natural 0.003 (0.08) Green Plaid (290) 36 (32.9) 100 (91) 46 (1168) ± 1/32 (± 0.8) 40 (275) Measured at various temperatures and gram loadings. 72° F (22° C) 120° F (49° C) gms 1000 500 1000 500 1500 1000 2000 1000 (1/2 sq. in. overlap). 150° F (66° C) 500 500 750 1000 Will hold listed weight for 100 hours. 200° F (93° C) 250 250 750 750 Tensile Strength: Elongation: Temperature Resistance: Short Term (Minutes, Hours) Long Term (Days, Weeks) psi (kPa) ° F (° C) ° F (° C) 90 (620) 380 (193) 220 (104) 160 (1100) 380 (193) 220 (104) 140 (965) 100 380 (193) 220 (104) 180 (1240) 100 380 (193) 220 (104) Solvent Resistance: UV Resistance: Cold Flex at -20°F (-30°C): No apparent degradation when exposed to splash tests of most hydrocarbon solvents. No apparent degradation when exposed to 7 days in U.V. chamber. No cracking when flexed around a 1/4 in. (6.4 mm mandrel). Thermal Conductivity: Dielectric Strength: BTU/hr/° F/ft /ft (watt/metre Kelvin) volts/mil (volts/0.025 mm) 0.036 (0.062) 200-300 (200-300) 0.036 (0.062) 200-300 (200-300) 0.036 (0.062) 200-300 (200-300) 0.036 (0.062) 200-300 (200-300) *3M™ Adhesive 100 is a firm acrylic pressure sensitive adhesive system. It features high ultimate bond strength, very good high temperature and solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging.

3M ™ Double Coated Urethane Foam Tapes 4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085 Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Double Coated Urethane Foam Tape Adhesive Type:* Units 4032 100 4052 100 4056 100 4085 740 Adhesive Carrier: Polyurethane Foam Polyurethane Foam Polyurethane Foam Polyurethane Foam Thickness: Nominal Thickness: Tolerance: Color: Release Liner: Liner Color: Approximate Density: (Foam Only) Standard Length: Maximum Length: Available Width: Normal Slitting Tolerance: Normal Tensile: (“T” Block) 1 in 2 (6.45 cm 2) Jaw Speed 2 in/min (50 mm/min) Static Shear: inch (mm) inch (mm) inch (mm) lb/ft (kg/m yard (meter) yard (meter) inch (mm) inch (mm) psi (kPa) 0.031 (0.8) 0.025-0.040 (0.64-1.02) Natural 0.003 (0.08) Green Plaid (320) 72 (65.8) 175 (160) 46 (1168) ± 1/32 (± 0.8) 60 (75) 0.031 (0.8) 0.025-0.040 (0.64-1.02) Black 0.003 (0.08) Green Plaid (225) 72 (65.8) 175 (160) 46 (1168) ± 1/32 (± 0.8) 75 (515) 0.0625 (1.6) 0.045-0.080 (1.142-2.03) Black 0.003 (0.08) Green Plaid (175) 36 (32.9) 100 (91) 46 (1168) ± 1/32 (± 0.8) 50 (345) 0.045 (1.2) 0.039-0.054 (1.00-1.45) Natural 0.003 (0.08) Tan (352) 72 (65.8) 100 (91) 46 (1168) ± 1/32 (± 0.8) 45 (310) Measured at various temperatures and gram loadings. 72° F (22° C) 120° F (49° C) gms 2000 1500 1500 750 1500 1000 1000 250 (1/2 sq. in. overlap). 150° F (66° C) 1000 750 750 — Will hold listed weight for 100 hours. 200° F (93° C) 1050 750 750 — Tensile Strength: Elongation: Temperature Resistance: Short Term (Minutes, Hours) Long Term (Days, Weeks) psi (kPa) ° F (° C) ° F (° C) 240 (1655) 380 (193) 220 (104) 225 (1550) 110 380 (193) 220 (104) 140 (965) 100 380 (193) 220 (104) 140 (965) 100 200 (93) 125 (152) Solvent Resistance: UV Resistance: Cold Flex at -20°F (-30°C): No apparent degradation when exposed to splash tests of most hydrocarbon solvents. No apparent degradation when exposed to 7 days in U.V. chamber. No cracking when flexed around a 1/4 in. (6.4 mm mandrel). Thermal Conductivity: Dielectric Strength: BTU/hr/° F/ft /ft (watt/metre Kelvin) volts/mil (volts/0.025 mm) 0.036 (0.062) 200-300 (200-300) 0.036 (0.062) 200-300 (200-300) 0.036 (0.062) 200-300 (200-300) 0.036 (0.062) 200-300 (200-300) *3M™ Adhesive 100 is a firm acrylic pressure sensitive adhesive system. It features high ultimate bond strength, very good high temperature and solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging. 3M™ Adhesive 740 is a medium-firm rubber-resin pressure sensitive adhesive system. It features good holding power and adhesion to a wide variety of surfaces including many low surface energy plastics such as polyethylene and polypropylene.

3M ™ Double Coated Urethane Foam Tapes 4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085

Features

  • The natural colored urethane foam tape products vary in color from white to light yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet radiation). This color change is normal and does not affect tape performance.
  • 3M™ Double Coated Urethane Foam Tape 4026 is available in roll form and die- cut pieces. Die-cut pieces of 3M tape 4026 is available in 3/4" or 1" squares, either individual pieces double linered with an extended liner on one side or in pads of 48 squares.
  • 3M™ Double Coated Urethane Foam Tape 4085 combines conformability with high immediate adhesion to most plastics including ABS, polycarbonate, acrylic, polyethylene and polypropylene as well as metal and paint. 3M tape 4085 tears easily which makes it ideal for hand application. Application Techniques • Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
  • To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol * and water (rubbing alcohol) or heptane.
  • Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents. Application Ideas The urethane foam tapes are generally ideal for interior applications or for exterior applications where the tape will be protected from the environment. The urethane foam is open cell. 3M™ Double Coated Urethane Foam Tape 4004 – Bond mirrors to walls or furniture 3M™ Double Coated Urethane Foam Tape 4008 – Bond acoustic panels to walls 3M™ Double Coated Urethane Foam Tape 4016 – Mount interior signs and nameplates 3M™ Double Coated Urethane Foam Tape 4026 – Mount air fresheners and soap dispensers 3M™ Double Coated Urethane Foam Tape 4032 – Attach wire clips to various surfaces 3M™ Double Coated Urethane Foam Tape 4052 – Bond window to microwave oven doors Mount electrical channel to wall surfaces 3M™ Double Coated Urethane Foam Tape 4056 – Mount wall corner protectors 3M™ Double Coated Urethane Foam Tape 4085 – Attach wire clips Attach air fresheners

3M ™ Double Coated Urethane Foam Tapes 4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085 Storage Shelf Life Certification/ Recognition Product Use Note 3M is a trademark of the 3M Company. Store in original cartons at 70°F (21°C) and 50% relative humidity. To obtain best performance, use these products within 24 months from date of manufacture except 3M™ Double Coated Urethane Foam Tape 4085 which is 18 months from date of manufacture. MSDS: 3M has not prepared MSDSs for these products which are not subject to the MSDS requirements of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for use, these products should not present a health and safety hazard. However, use or processing of the products in a manner not in accordance with the directions for use may affect their performance and present potential health and safety hazards. TSCA: These products are defined as articles under the Toxic Substances Control Act and therefore, are exempt from inventory listing requirements. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application. Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations. ISO 9001: 2000 3M Svenska AB Industri Bollstanäsvägen 3 191 89 Sollentuna Tel: 08-92 22 50 Fax: 08-92 22 88 E-post: kundservice@mmm.com www.3M.se/tejp