400 LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Electrical Characteristics

  • Lead-free and R oHS Compliant
  • R educed PCB space requirements
  • Direct solderable or plug- in v ersions
  • Low internal resist ance
  • Shock saf e casing Vibration resist ant
  • Halogen-free % of Ampere Rating Opening Time 150% 1 Hour , Minimum 0% 120 Secs., Maximum 275% 40 0 ms, Minimum; 1 0 Secs., Maximum 0% 150 ms, Minimum; 3 Secs., Maximum 000% 20 ms, Minimum; 1 50 ms, Maximum

1.0×IN max. (mV) Power Dissipation 1.0×IN max. (mW) Melting Integral 10×IN max. (A2s) Agency Approvals 0500 500mA 250V 130A/250VAC* 50-60 Hz cosϕ = 1 .0 165 297 2.17 x x x x 0800 800mA 250V 116 387 6.72 x x x x 110 0 1 .00A 250V 89 432 9.63 x x x x x 1125 1 .25A 250V 76 411 14.44 x x x x x 1160 1 .60A 250V 76 601 21 .75 x x x x x 1200 2.00A 250V 75 758 32.16 x x x x x 1250 2.50A 250V 61 683 61 .94 x x x x x 1315 3.15A 250V 55 921 101.61 x x x x x 1400 4.00A 250V 65 936 133.40 x x x x x 1500 5.00A 250V 56 948 216.50 x x x x x 1630 6.30A 250V 48 926 318.71 x x x x x * Per VDE, appro ved breaking capacit y is at 1 00A, 250V AC The 400 Series is a TE5®, Time-Lag t ype subminiat ure fuse designed f or o vercurrent protection. It is 250V rated and designed in accordance to IEC 60 127-3.

Description

Applications

  • Battery c hargers
  • Consumer electronics Power supplies Industrial controllers Additional Information Datasheet SamplesResources

© 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/14/14 Radial Lead Fuses TE5® > Time-Lag > 400 Series Average Time Current CurvesT emperature Rerating Curve Soldering Parameters - Wave Soldering 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Temperature ( ) - Measured on bottom side of board Time (Seconds) Preheat Time Cooling Time Dwell Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activ ation Temperat ure) (Typical Industr y R ecommendation) Temperature Minimum: 10 0° C Temperat ure Maximum: 15 0° C P reheat Time: 60-180 seconds S older Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperat ure: 350° C +/- 5°C Heating Time: 5 seconds max. Not e: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: 0.5A 0.8A 1.25A 1.6A 2.5A 3.15A 6.3A 0.001 0.01 0.1 100 0 1 10 100 1000 TIME IN SECONDS CURRENT IN AMPERES 100 120 140 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) PERCENT OFRATING 23°C DE-RATING CURVE

© 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/14/14 Radial Lead Fuses TE5® > Time-Lag > 400 Series Materials Base/Cap: Bro wn Thermoplastic P olyamide, UL 94 V-0 R ound Pins: Copper , Tin-plated Lead Pull Strength 1

0 N (IEC 60

068-2-21) Solderability 260ºC, ≤ 3s. (W ave) 350ºC, ≤ 1s. (Soldering Iron) Solder ing Heat Resistance 260ºC, 1 0s. (IEC 60 068-2-20) 350ºC, 3s. (Soldering Iron) Product Characteristics Operating Temperature –40ºC to +85ºC (consider derating) Climatic Cat egory –40ºC to +85ºC/21 da ys (EN 60 St ock Conditions +10ºC to +60ºC relativ e humidit y 75% y early a verage, without de w, maximum v alue f or 30 da ys – 95% Vibration Resistance cy cles at 1 5 min. eac h (EN60 028-2-6) 10–60 Hz at 0.75 mm amplit ude 20–2000 Hz at 1 0 g acceleration Dimensions Part Numbering System Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width

400 Series

Tape & A mmopack N/A 1,400 0000 N/A Short L eads N/A 1,400 0440 N/A 7.5 m m P itch N/A 1,400 0075 N/A 400 xxxx 0000 Series Packaging Code

0000 T ape/Ammopack (1,400 pcs)

0440 Shortleads - Bulk (1,400 pcs)

0075 7 .5mm pitch - Bulk (1,400 pcs) Amp Code Refer to Amp Code column of Electrical Characteristics Table 8.5 0.5 min max. 8L Ø 0.6 5.08 Holes in PCB Long Leads (L=18.8±0.3mm) Short Leads (L=4.3±0.3mm) Holes in PCB 7.5mm Pitch 1 +0.1 7.5±0.3 1 +0.11.5 4.0±1.0 4.0±0.5 max. 4