4000UV 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
September, 2019 3M™ Marine Adhesive/Sealant Fast Cure 4000 UV Product Description 3M™ Marine Adhesive/Sealant 4000 UV is a one-part adhesive sealant that cures to form a rm, rubbery waterproof seal. Its exibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking. Designed for marine applications above and below the waterline. Its superior UV resistance properties makes this an ideal cosmetic adhesive sealant. Product Features
3M™ Marine Adhesive/Sealant Fast Cure 4000 UV Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Uncured Physical Properties Property Values Notes Color White/Black Colors may vary from nearly white to yellow/amber. Adhesive performance is not aected by color variation. Density 11.7 lb/gal Base Polyether Consistency Medium Paste Typical Performance Characteristics Property Values Test Condition Notes Shore A Hardness 39 Service Temperature Range -40 to 90 °C -40 to 190 °F Application Temperature 4 to 38 °C 40 to 100 °F Table continued on next page Overlap Shear Strength Substrate Substrate Notes Failure mode 13.3 kg/cm² 190 lb/in² Oak Woods 85/15 (Cohesive/Adhesive) 14.8 kg/cm² 210 lb/in² Maple Woods 80/20 (Cohesive/Adhesive) 13.3 kg/cm² 190 lb/in² Fir Woods 70/30 (Cohesive/Adhesive) 11.2 kg/cm² 160 lb/in² Mahogany Woods 60/40 (Cohesive/Adhesive) 15.8 kg/cm² 225 lb/in² Aluminum Metals 80/20 Cohesive/Adhesive
3M™ Marine Adhesive/Sealant Fast Cure 4000 UV Typical Performance Characteristics (continued) Overlap Shear Strength Substrate Substrate Notes Failure mode 14.0 kg/cm² 200 lb/in² Fiberglass Plastics/Polymers Cohesive 17.6 kg/cm² 250 lb/in² Gelcoat Plastics/Polymers Cohesive 180° Peel Adhesion Substrate 60 oz/in Gelcoat 57 oz/in Fiberglass 70 oz/in Aluminum 50 oz/in Mahogany Temperature Resistance Substrate Substrate Notes {17.6,55/45 (Cohesive/Adhesive)} kg/cm² {250,55/45 (Cohesive/Adhesive)} lb/in² Fir Woods {28.1,95/5 (Cohesive/Adhesive)} kg/cm² {400,95/5 (Cohesive/Adhesive)} lb/in² Aluminum Metals {19.3,Cohesive} kg/cm² {275,Cohesive} lb/in² Gelcoat Plastics/Polymers {22.8,80/20 (Cohesive/Adhesive)} kg/cm² {325,80/20 (Cohesive/Adhesive)} lb/in² Fiberglass Plastics/Polymers Environmental Resistance:
3M™ Marine Adhesive/Sealant Fast Cure 4000 UV Typical Physical Properties Property Values Notes Approximate Coverage 36.6 lineal m 120 lineal ft 10.5 oz. [310 mm Cartridge]; 1/8 in (3 mm) bead Product Construction Product Uses 3M Marine Adhesive Sealant 4000 UV may be used in typical bedding and sealing applications including berglass hull, wood to berglass, porthole frames, deck ttings, moldings, thru hull and deck hardware. Handling/Application Information Application Ideas Typical Marine Adhesive Sealant Applications: Portlights Hatches Thru-hulls Rails Metal Hardware Moldings Wood Teak Fiberglass Gelcoat Porthole Frames Directions for Use *Higher temperature and humidity conditions will accelerate the tack free time and cure. Please plan accordingly.
3M™ Marine Adhesive/Sealant Fast Cure 4000 UV Storage and Shelf Life Trademarks 3M is a trademark of 3M Company. References Property Values 3m.com Product Page www.3M.com/sealants Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=4000 UV This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.
3M™ Marine Adhesive/Sealant Fast Cure 4000 UV Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.