3P0210000 CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

M Thumbwheel & Pushwheel M–11 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com 3P Series Miniature Pushwheel Switches Features/Benefits

  • Snap-in front mount design for easy assembly
  • 10 position models available Typical Applications
  • Test & measurement equipment
  • Industrial machinery
  • Computer peripherals Specifications CONTACT RATING: CARRY: 1 AMP continuous. SWITCH: 0.4 VA max., 100 mA max., 28 V DC max. OPERATING VOLTAGE: 50 mV to 28 V DC. ELECTRICAL LIFE: 100,000 actuations. CONTACT RESISTANCE: Below 300 m Ω typ. @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. (dry). DIELECTRIC STRENGTH: 500 Vrms min. @ sea level between common terminal and any output. OPERATING TEMPERATURE: –10ºC to 65ºC. Materials HOUSING: Polycarbonate (UL 94V-0). PUSHWHEEL: Polycarbonate (UL 94V-0). PUSHBUTTON: Polycarbonate (UL 94V-0). ROTOR CONTACTS: Gold over nickel over copper alloy. STATOR CONTACTS: Hard gold over nickel over copper on epoxy fiberglass. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Note: All models listed are RoHS compliant. See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages M-12 thru M-15. For additional options not shown in catalog, consult Customer Service Center. Consult factory for illumination availability. Series 3P Miniature pushwheel Number of Sections

0 Switch section

0 No Iens

2 Dust lens

21 BCD 1-2-4-8

23 Complement of BCD 1-2-4-8

0 Short PCB

1 Extended PCB

N Short PCB with solder pins* (.100” spacing) P Extended PCB with solder pins* (.200” spacing)

9 Any combination

0 Matte black housing, gloss black wheel,

white marking, black pushbutton Mounting Style

0 Snap-in, front mount

3 Snap-in, front mount

  • Note: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant). Termination option P (RoHS compliant) replaced termination option A (Non-RoHS compliant).

M Thumbwheel & Pushwheel M–12 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com 3P Series Miniature Pushwheel Switches SERIES NUMBER OF SECTIONS FUNCTION CODE Available Terminations: 0, 1, N See figs. 2 & 3, page N-19. Available Terminations: P, 0, 1, N See figs. 2 & 3, page N-19. N = Number of sections.

23 COMPLEMENT OF BCD 1-2-4-8,

10 POSITION

21 BCD 1-2-4-8, 10 POSITION

3P MINIATURE PUSHWHEEL SWITCH 1-4 Number of switch sections in assembly, includes endplates. 0 Switch section only, no endplates. NOTE: For terminal location diagrams, see page M-14. NOTE: Endplates and blank sections available separately, see page M-14.

M Thumbwheel & Pushwheel M–13 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com 3P Series Miniature Pushwheel Switches MOUNTING STYLE TERMINATIONS N = Number of sections. N = Number of sections. Signal traces cut, except for common(s). For terminal location numbers, see next page.

9 ANY COMBINATION OF TERMINATION

CONFIGURATIONS OR SPECIAL TERMINATIONS P EXTENDED PCB, TYPE 1 WITH SOLDER PINS

1 EXTENDED PCB WITH PROVISION

N SHORT PCB, TYPE 0 WITH SOLDER PINS0 SHORT PCB

3 SNAP-IN FRONT MOUNT WITH SPACER,

SECTION PITCH: .400 (70,16) EACH SECTION, LAST SECTION .300 (7,62)

0 SNAP-IN FRONT MOUNT,

SECTION PITCH: .300 (7,62) EACH SECTION Recommended panel thickness: .039-.156 (0,99-3,95) Recommended panel thickness: .039-.156 (0,99-3,95) Specify on configuration form, page M-15 and consult Customer Service Center. PC Board 1/32" (0,79) thick. For terminal location numbers, see next page. Signal traces cut, except for common(s). NOTE: All terminal holes shown may not be present for all function codes, consult Customer Service Center. ** Note: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant). Termination option P (RoHS compliant) replaced termination option A (Non-RoHS compliant).

M Thumbwheel & Pushwheel M–14 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com 3P Series Miniature Pushwheel Switches TERMINATIONS Fig. 1 Solder Pins Fig. 2 Terminal Location Numbers COLOR/MARKING/STOPS 0 MATTE BLACK HOUSING (Gloss black wheel with white characters, black pushbuttons, no stops.) DUST LENS 2 DUST LENS (Protects character face of the wheel from abrasion and dust.)

0 NO LENS

Blank sections, .300 THK. PART NO.

663702000 BLACK

PART NO. 657800000 Spacers, .100 THK. (Makes section pitch .400) PART NO.

663602000 BLACK

complee assembly. PART NO.

623502000 LEFT-BLACK

623602000 RIGHT-BLACK

LEFT-with hole RIGHT-with pin

M Thumbwheel & Pushwheel M–15 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com 3P Series Miniature Pushwheel Switches QUALITY CONTROL INSTRUCTIONS PRODUCTION APPROVAL DATE C&K PART NUMBER REV. INITIALS DATE CATALOG PART NO. COMPANY NAME CUSTOMER PRINT REVISION:ADDRESS TEL.# CUSTOMER CONTACT DATE ORIGINATED BY SALES REP. DETAILS: Q.C. APPROVAL DATE Configuration Form GRAY SHADED AREAS TO BE FILLED IN BY CUSTOMER SERVICE. C&K PART NUMBER PUSHWHEEL SECTIONS DESCRIBE IN APPROPRIATE ROW SPECIAL INSTRUCTIONS OR SPECIFICATIONS: 3 P FUNCTION CODE – TERMINATIONS– COLOR/MARKING/STOPS/SEAL – ILLUMINATION FOR SWITCHES WITH MORE THAN 11 SECTIONS, CONTINUE ON ADDITIONAL SHEETS. ENTER OPTION CODES IN APPROPRIATE BOXES. FUNCTION CODES INCLUDE BLANK SECTIONS (SEE PAGE M-17). NO. OF SEC.

3 P –

P