397 ENERGIZER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Chemical System: Silver Oxide (Zn/Ag2O) Designation: ANSI-1164SO/1163SO, IEC-SR59 Nominal Voltage: 1.55 Volts Typical Capacity: 33 mAh* (to 1.2 volts) Capacity Test: 45K ohm continuous drain at 21°C Typical Weight: 0.5 grams (0.018 oz.) Typical Volume: 0.13 cubic centimeters (0.008 cubic inch) Impedance (40 Hz): 15 to 25 ohms Load Cutoff 1.2V (ohm) (hours) 45K 971 Industry Standard Dimensions ENERGIZER 397/396 Typical Performance at Low Discharge Rates Temperature Characteristics SILVER OXIDE Specifications Cross Section * Varies according to the applied load, temperature, and cutoff voltage. at 1.53V (milliamperes) Schedule Typical Drains ©Energizer Holdings, Inc. - Contents herein do not constitute a warranty. Important Notice This datasheet contains typical information specific to products manufactured at the time of its publication. Continuous 0.034 Typical Performance at 21°C (70°F) mm (inches) Typical Discharge Characteristics PRODUCT DATASHEET 1-800-383-7323 / USA 1-800-383-7323 / CANADA 1-800-383-7323 USA/CAN www.energizer.com 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 0 250 500 750 1000 Voltage, CCV Service, Hours Schedule: Continuous Typical Drain @1.53V: 0.034 milliamperes Load: 45K ohm DESIGNED FOR USE ON CONTINUOUS LOW DRAIN HIGH PULSE ON DEMAND 100 125 -20 0 20 40 Service (%) Temperature (C) Service Effects 100 02468 1 0 1 2 Service (%) Storage Time (yrs) Storage Effects 40 C 20 C Anode Cap Gel Anode Gasket Can Separator Cathode 7.90 (0.311) 7.55 (0.297) R0.64 (0.025) Ref. Typical 0.08 (0.003) Minimum Ref. (applies to top edge of gasket or edge of crimp, whichever is higher) 0.25 (0.010) Maximum Ref. Permissible deflection from a flat 2.30 (0.091) 2.60 (0.102) 2.33 (0.092) Ref. 2.08 (0.082) Ref. 3.00 (0.118) Minimum Form No. EBC - 4354B Page 1 of 1 OBSOLETE