3915 ADAFRUIT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Adafruit Circuit Playgr ound Express Enclosure PRODUCT ID: 3915 We've got nice cases for many of our beloved boards, but the Circuit Playground Express has been left out of couture enclosure game. Enter Ada-friend Mike Doell to the rescue! This minimal but elegant acrylic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools required. You can sti ll press all the buttons and slide the switch thanks to a clever plastic widget fitted inside. The case winds around all the touch pads so you can still touch them or attach alligator clips. On the back, we have two slots that can be used to pass through ribbon or webbing up to 1" /2.5mm wide There is also a slim 1/4"-20 nut that is embedded in the center back. This is compatible with any camera mou nting accessory, so if you need a solid attachment, you can use any camera positioning tool or tripod. Since it's crystal clear, you can see all the Ne oPixels shining in glorious color. The light sensor also works just fine and the case w ill not block IR messages going in or out.
Even though there are no microphone or spea ker holes, audio passes through the case via various small openings - we tested it and the difference is barely noticeable. This enclosure is only compatible wi th the Circuit Playground Express! This case will protect your Circuit Playground Express from every day usage, but it is not waterproof or weatherproof. This product co mes as 2 molded plastic halves with the buttons in place. No boards, cables, or accessories are included. TECHNICAL DETAILS Dimensions (assembled): 55.5 x 52.6 x 16.3mm Weight: 15.5g
https://www.adafruit.com/product/3915 11‐19‐18