390-389TZ ENERGIZER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Chemical System: Silver Oxide (Zn/Ag2O) Designation: ANSI-1138SO, IEC-SR54 Nominal Voltage: 1.55 Volts Typical Capacity: 90 mAh* (to 1.2 volts) Capacity Test: 15K ohm continuous drain at 21°C Typical Weight: 1.35 grams (0.048 oz.) Typical Volume: 0.32 cubic centimeters (0.019 cubic inch) Impedance (40 Hz): 5 to 7 ohms Load Cutoff 1.2V (ohm) (hours) 15K 883 Industry Standard Dimensions ENERGIZER 390/389 Typical Performance at Low Discharge Rates Temperature Characteristics SILVER OXIDE Specifications Cross Section * Varies according to the applied load, temperature, and cutoff voltage. at 1.52V (milliamperes) Schedule Typical Drains ©Energizer Holdings, Inc. - Contents herein do not constitute a warranty. Important Notice This datasheet contains typical information specific to products manufactured at the time of its publication. Continuous 0.102 Typical Performance at 21°C (70°F) mm (inches) Typical Discharge Characteristics PRODUCT DATASHEET 1-800-383-7323 / USA 1-800-383-7323 / CANADA 1-800-383-7323 USA/CAN www.energizer.com 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 0 200 400 600 800 1000 Voltage, CCV Service, Hours Schedule: Continuous Typical Drain @1.52V: 0.102 milliamperes Load: 15K ohm DESIGNED FOR USE ON CONTINUOUS LOW DRAIN (HIGH PULSE ON DEMAND) 100 125 -20 0 20 40 Service (%) Temperature (C) Service Effects 100 02468 1 0 1 2 Service (%) Storage Time (yrs) Storage Effects 40 C 20 C Anode Cap Gel Anode Gasket Can Separator Cathode 11.60 (0.457) 11.30 (0.445) R1.60 (0.063) Ref. Typical 0.03 (0.001) Minimum Ref. (applies to top edge of gasket or edge of crimp, whichever is higher) 0.25 (0.010) Maximum Ref. Permissible deflection from a flat 3.80 (0.150) Minimum 2.75 (0.108) 3.05 (0.120) 2.49 (0.098) Ref. 2.75 (0.108) Ref. Form No. EBC - 4351B Page 1 of 1 OBSOLETE