DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
DCS Input/Output Relay Card Series 38BOS6OUTPUT RELAY CARD P. 1 / 2 MODEL & SUFFIX CODE SELECTION 38BOS6–❑ –R MODEL TEST SWITCH 0 :W ithout 1 :W ith (AUTO at the center) POWER INPUT R : 24V DC
ORDERING INFORMATION
Specify code number. (e.g. 38BOS6-1-R)
RELATED PRODUCTS
- Standard Rack (model: 38B❑ ) GENERAL SPECIFICATIONS Construction: rack mounted; terminal access via screw terminals at the front and via connector at the rear; terminal cover provided Connection Input: connector Output: M3.5 screw terminals (nickel-plated steel; torque 0.8 N·m) Power input: supplied from connector Isolation: input or power to output INPUT & OUTPUT ■ INPUT: status output from a controller 24V DC @30mA min. ON resistance ≤200Ω OFF resistance ≥100kΩ ■ OUTPUT: dry contact Rating: 250V AC @3A (cosø=1) 30V DC @3A (resistive load) Minimum switching load: 5V DC @10mA Relay life Mechanical: 5 × 107 cycles Electrical: 105 cycles Relay protection: external protection recommended when driving an inductive load (coil etc.) INSTALLATION Power input: 24V DC ±10%, approx. 60mA (ripple 10% p-p max.) Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90% RH (non-condensing) Mounting: Standard Rack 38B❑ Dimensions: W24×H110×D110 mm Weight: 150 g (0.33 lbs) PERFORMANCE Insulation resistance: ≥100MΩ with 500V DC Dielectric strength: 1500V AC @1 minute (input or power to output to gnd) FRONT VIEW AUTO ON AUTO ON OFFOFF Test SW LED•Ch.1 Output Terminals Test SW LED
- Ch.2 Output Terminals Terminal Cover
Specifications subject to change without notice. P. 2 / 2 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM The jumpers are factory set to the position A – C. INPUT POWER B A JUMPER JP11 B A JP12 B A JUMPER JP21 B A C C C C JP22 AUTO OFF ON TEST SW AUTO OFF ON TEST SW OUTPUT 1 OUTPUT 2 OUTPUT 1 OUTPUT 2 Ch. 1 Ch. 2 CONNECTOR