3851150000

385 LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

WebSite Europe Tel: +49 2302 662-107 Americas Tel: +1 404 699-7820 Asia Tel: +852 26 14-1108 China Tel: +86 21 6432 5146 cURus CCCe 350mA 0350 125V 540 250 90 0.6 32 19 36 • • 500mA 0500 125V 320 220 110 1.2 48 26 61 • • 800mA 0800 125V 160 170 130 2.7 80 42 67 • • 1.00A 1100 125V 105 140 130 4.5 100 52 67 • • 1.25A 1125 125V 75 125 140 6.7 128 65 67 • • 1.50A 1150 125V 60 120 170 9.0 155 78 67 • •

50 A / 125 V AC

cos ϕ = 1.0 FCC Bellcore ITU 8,5 0,5 min max. 818,8 ∅ 0,6 5,08 1 +0,1 1,5 max.4 Dimensions (mm)Dimensions (mm)Dimensions (mm)Dimensions (mm)Dimensions (mm) Limits for Pre-arcing TimeLimits for Pre-arcing TimeLimits for Pre-arcing TimeLimits for Pre-arcing TimeLimits for Pre-arcing Time Holes in PCB InformationInformationInformationInformationInformation Number Number Number Number Number 385 Rated Amp Voltage Breaking Cold Resistance Voltage Drop Power Dissipation Melting Integral Surge Amplitude (A)1 Approvals Current Code Rating Cap acity 0.1 x I N 1.0 x IN 1.0 x IN 10 x IN max. (mΩ) max. (mV) max. (mW) min. (A 2s) TTTTTelecom Interface Protectorelecom Interface Protectorelecom Interface Protectorelecom Interface Protectorelecom Interface Protector Lead FreeLead FreeLead FreeLead FreeLead Free TTTTTime-Current Characteristicime-Current Characteristicime-Current Characteristicime-Current Characteristicime-Current Characteristic Transient Tolerant (T) StandardStandardStandardStandardStandard UL 248-14 CSA C22.2 No. 248.14 ApprovalsApprovalsApprovalsApprovalsApprovals cULus Recognized FeaturesFeaturesFeaturesFeaturesFeatures Surge proof for telecom applications Reduced PCB space requirements Highly defined cut-off times Irreversible physical separation Low internal resistance Flame resistant encapsulated casing CCCe for China import WWWWWebLinksebLinksebLinksebLinksebLinks Further infos see:Further infos see:Further infos see:Further infos see:Further infos see: www.wickmanngroup.com Further application infos seeFurther application infos seeFurther application infos seeFurther application infos seeFurther application infos see Fuseology:Fuseology:Fuseology:Fuseology:Fuseology: www.wickmanngroup.com/download/ fuseology.pdf Rated Current 1.0 x I N 3.0 x I N SpecificationsSpecificationsSpecificationsSpecificationsSpecifications PackagingPackagingPackagingPackagingPackaging 000: Tape/Ammopack (1400 pcs.) MaterialsMaterialsMaterialsMaterialsMaterials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper, Sn plated Operating TOperating TOperating TOperating TOperating T emperatureemperatureemperatureemperatureemperature -40 ºC to +85 ºC (consider de-rating) Climatic CategoryClimatic CategoryClimatic CategoryClimatic CategoryClimatic Category -40 ºC/+85 ºC/21 days Stock ConditionsStock ConditionsStock ConditionsStock ConditionsStock Conditions +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days-95 % Vibration ResistanceVibration ResistanceVibration ResistanceVibration ResistanceVibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Lead Pull StrengthLead Pull StrengthLead Pull StrengthLead Pull StrengthLead Pull Strength 10N (EN 60068-2-21) SolderabilitySolderabilitySolderabilitySolderabilitySolderability 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering iron) Soldering Heat ResistanceSoldering Heat ResistanceSoldering Heat ResistanceSoldering Heat ResistanceSoldering Heat Resistance 260 ºC, 10 s (IEC 60068-2-20) MarkingMarkingMarkingMarkingMarking , TIP , T , Current Rating Unit WeightUnit WeightUnit WeightUnit WeightUnit Weight 0.60 g (approx.) 1 FCC 47 Part 68: Minimum pulse load quantity is 2 pulses at a test generator output of 800V and 10x560µs waveform. ITU-T K.20: Minimum pulse load quantity is 30 pulses at a test generator output of 1000V, 67A and 10x700µs waveform. Bellcore GR-1089: Minimum pulse load quantity is 50 pulses at a test generator output of 1000V and 10x1000µs. CCCCCIRCUITIRCUITIRCUITIRCUITIRCUIT P P P P P ROTECTORSROTECTORSROTECTORSROTECTORSROTECTORS Specifications are subject to change without notice

WebSite Europe Tel: +49 2302 662-107 Americas Tel: +1 404 699-7820 Asia Tel: +852 26 14-1108 China Tel: +86 21 6432 5146 Contact WICKMANN for individual I-t curves IIIIIFaultFaultFaultFaultFault / I / I / I / I / I RatedRatedRatedRatedRated TIP / No. 385385385385385 CCCCCIRCUITIRCUITIRCUITIRCUITIRCUIT P P P P P ROTECTORSROTECTORSROTECTORSROTECTORSROTECTORS 23 4 5 6 7 8 911 0 0.001 0.01 0.1 100 1,000 10,000 100,000 151.5 Test value I-t Characteristics (Min-Max Limit)