383 LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Description
%$4#%$ 2/!#% 1%04)1%,%-32 9)1%#32.+$%1!"+%.1 /+4')-5%12).-2 9!+.'%-&1%% 9+%#31.-)#!++!23 TR5®),%+!'38/% .41)-),4, 2%#!7),4, 2%#)- 2%#!7 ,2)- 2%#!7 ,2)- ,2!7
Applications
Electrical Characteristics for Series % of Ampere Rating Opening Time (8A-10A)
1 Hour, Minimum
120 sec., Maximum 400 ms., Min.; 10 sec., Max. 150 ms., Min.; 3 sec., Max. 20 ms., Min.; 150 ms., Max. Electrical Characteristics for Series % of Ampere Rating Opening Time (1A-6.3A) 150% 210% 275% 400% 1000% Agency Approvals Agency Agency File Number Ampere Range 5007679-1170-0038/92585 JET1896-31007-2001 JET1896-31007-1003 4A - 5A 1A - 5A 6.3A - 10A E67006 1A - 10A Electrical Characteristics Specifications by Item Power Dissipation 1.5 x 1N max. (mW) Melting Integral 10 x 1N min. (A2s) Agency Approvals Voltage Drop 1.0 x 1N max. (mV) Amp Code Amp Rating (A) Breaking Capacity 50-60Hz/cos =1 Max Voltage Rating (V) 1100 1125 1160 1200 1250 1315 1400 1500 1630 1800 2100 1.00 1.25 1.60 2.00 2.50 3.15 4.00 5.00 6.30 8.00 10.00 300 300 300 300 300 300 300 300 300 300 300 100 400 465 490 670 750 900 1200 1250 1400 1600 1600 3.0 4.5 9.0 105 180 260 X X X X X X X X X X X X X X X X X X X X X 100A@300VAC 50A@300VAC 50A@300VAC Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
383 Series, TR5®, Time-Lag Fuse
Revised: May 6, 2009 Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 160 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Radial Lead Fuses
383 Series
TR5® > Time-Lag > 383 Series Please refer to www.littelfuse.com/series/383.html for current information. AMBIENT TEMPERATURE PERCENT OF RATING 23°C 140 120 100 0.001 0.01 0.1 100 1000 10000 100000 CURRENT IN AMPERES TIME IN SECONDS 1.2 1.6A2A2. 3.1 5A 4A5A 10A6.3A8A 0.1 1 10 100 1000 Average Time Current CurvesTemperature Rerating Curve Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters:
Revised: May 6, 2009 161© 2009 Littelfuse, Inc. Specifications are subject to change without notice. Radial Lead Fuses TR5® > Time-Lag > 383 Series Please refer to www.littelfuse.com/series/383.html for current information. Dimensions Part Numbering System Packaging Tape & Ammopack Short Leads 0000 0410 1,000 1,000 N/A N/A N/A N/A 383 xxxx 0000 Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Packaging Code 0000 Tape/Ammopack (1,000pcs.) 0410 Short Leads - Bulk (1,000pcs.) Climatic Category -40°C / +85°C / 21days Stock Condition +10°C to +60°C relative humidity 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15min. Each (EN60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10g acceleration Product Characteristics Operating Temperature -65°C to +125°C (based on internal thermal cycle test up 125°C consider de-rating)Materials Base/Cap: Brown Thermoplastic Polyamide PA6.6, UL 94 V0 Round Pins: tin-plated Copper Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260°C, ≤ 3s (Wave) 350°C, ≤ 1s (Soldering Iron) Soldering Heat Resistance 260°C, 10s (IEC60068-2-20) 350°C, 3s (Soldering Iron)8.5 5.08 0.6 Holes in PCB 1 + 0.1 0.5 min max. 8 Long Leads (L=18.8mm) Short Leads (L=4.3mm)