380SA009NF20

380FA009B08 GLENAIR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

www.glenair.com E-Mail: sales@glenair.comSeries 38 - Page 50 GLENAIR, INC.• 1211 AIR WAY• GLENDALE, CA 91201-2497• 818-247-6000• FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 STYLE F Light Duty (T able IV) JCable Range .416 (10.5) Max STYLE G Light Duty (T able V) CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING TYPE D INDIVIDUAL OR OVERALL SHIELD TERMINATION

380 F S 009 M 16 05 F 6

A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F , G) Cable Entry (Table IV, V) Shell Size (T able I) Finish (Table II) STYLE 2 (STRAIGHT See Note 1) Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) STYLE 2 (45° & 90° See Note 1) .88 (22.4) Max G (Table III) E (T able III) F (T able III) C Typ. (T able I) A Thread (T able I) Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) H (Table III) .072 (1.8) Max KCable Entry 380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile Now Available with the ´NESTORµ Glenair’s Non-Detent, Spring-Loaded, Self- Locking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface.

www.glenair.com E-Mail: sales@glenair.comSeries 38 - Page 51 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 Cable Range Dash No. K Max .656 (16.7) .781 (19.8) .906 (23.0) 1.031 (26.2) 1.156 (29.4) 1.281 (32.5) 1.406 (35.7) 1.531 (38.9) 1.656 (42.1) 1.781 (45.2) Cable Entry Max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F , G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. Dash No. Min .125 (3.2) .250 (6.4) .312 (7.9) .437 (11.1) .562 (14.3) .687 (17.4) .812 (20.6) 1.062 (27.0) J Max .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.843 (46.8) TABLE V: CABLE ENTRY Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.250 (31.8) TABLE IV: CABLE ENTRY 380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile TABLE II: STANDARD FINISHES See Inside Back Cover for Additional Finish Options GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel TABLE III: ELBOW DIMENSIONS A-F-L-S Shell Size Conn. Desig. H E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.445 (36.7) 1.565 (39.8) 1.585 (40.3) 1.655 (42.0) 1.725 (43.8) 1.915 (48.6) 1.915 (48.6) 2.025 (51.4) 2.025 (51.4) 2.195 (55.8) 2.445 (62.1) 2.445 (62.1) F Max 1.500 (38.1) 1.510 (38.4) 1.580 (40.1) 1.660 (42.2) 1.770 (45.0) 1.960 (49.8) 1.960 (49.8) 2.110 (53.6) 2.110 (53.6) 2.160 (54.9) 2.260 (57.4) 2.360 (59.9)