380FA006NF14

380AA006B08 GLENAIR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

www.glenair.com E-Mail: sales@glenair.comSeries 38 - Page 28 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 J (Table III) G (Table IV) H (Table IV) B (Table I) STYLE M Medium Duty - Dash No. 01-04 (Table X) STYLE D Medium Duty (Table X) YCable Range X Cable Range .135 (3.4) Max Z .850 (21.6) Max Cable RangeY STYLE M Medium Duty - Dash No. 10-28 (Table X)

380 F S 006 M 16 10 D 6

A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (M, D) Cable Entry (Table X) Shell Size (Table I) Finish (Table II) E (Table IV) F (Table IV) B (Table I) A Thread (Table I) J (Table III) CONNECTOR DESIGNATORS A-B*-C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 DIRECT COUPLING TYPE C OVERALL SHIELD TERMINATION STYLE 2 (STRAIGHT See Note 1) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) B (Table I) 380-006 EMI/RFI Non-Environmental Backshell Heavy-Duty with Strain Relief Type C - Direct Coupling - Low Profile

www.glenair.com E-Mail: sales@glenair.comSeries 38 - Page 29 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 © 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324 TABLE X: CABLE ENTRY Dash No. X Max .850 (21.6) .850 (21.6) .850 (21.6) .850 (21.6) .760 (19.3) .760 (19.3) 1.073 (27.3) 1.323 (33.6) 1.323 (33.6) 1.572 (39.9) Min .062 (1.6) .125 (3.2) .250 (6.4) .375 (9.5) .375 (9.5) .438 (11.1) .562 (14.3) .750 (19.1) .875 (22.2) 1.125 (28.6) Max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .938 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) Y Max .781 (19.8) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.281 (32.5) 1.500 (38.1) 1.719 (43.7) 2.062 (52.4) 2.312 (58.7) 2.719 (69.1) Cable Range Z Max .593 (15.1) .718 (18.2) .843 (21.4) .968 (24.6) 1.192 (30.3) 1.380 (35.1) 1.535 (39.0) 1.848 (46.9) 2.255 (57.3) 2.505 (63.6) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only.) 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight back- shells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. 380-006 EMI/RFI Non-Environmental Backshell Heavy-Duty with Strain Relief Type C - Direct Coupling - Low Profile TABLE IV: ELBOW DIMENSIONS G Max .636 (16.2) .636 (16.2) .710 (18.0) .731 (18.6) .825 (21.0) .988 (25.1) 1.087 (27.6) 1.325 (33.7) 1.337 (34.0) 1.827 (46.4) 2.027 (51.5) H Max 1.858 (47.2) 1.858 (47.2) 1.978 (50.2) 1.998 (50.7) 2.357 (59.9) 2.447 (62.2) 2.617 (66.5) 2.852 (72.4) 3.022 (76.8) 3.272 (83.1) 3.272 (83.1) F Max 1.848 (46.9) 1.848 (46.9) 1.908 (48.5) 1.968 (50.0) 2.347 (59.6) 2.457 (62.4) 2.647 (67.2) 2.922 (74.2) 2.972 (75.5) 3.072 (78.0) 3.162 (80.3) E Max .567 (14.4) .567 (14.4) .630 (16.0) .692 (17.6) .755 (19.2) .848 (21.5) 1.036 (26.3) 1.130 (28.7) 1.255 (31.9) 1.317 (33.5) 1.348 (34.2) Elbow Size TABLE Il: STANDARD FINISHES See Inside Back Cover for Additional Finish Options GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel Shell Size A-E-F J-H-L-S 1.180 (30.0) 1.180 (30.0) 1.180 (30.0) 1.180 (30.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) 1.610 (40.9) 1.610 (40.9) 1.610 (40.9) 1.610 (40.9) D-B-G-K 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.560 (39.6) 1.750 (44.5) 1.750 (44.5) 2.190 (55.6) J Max - Conn. Designator TABLE III: FRONT ADAPTER C 1.735 (44.1) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6) 1.915 (48.6)