3799 ADAFRUIT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Black Miniature Metal Webcam Cover PRODUCT ID: 3799 Let's just say, hypothetically, that some one wanted to take over your webcam and observe your every move. And let's just say you didn't want them to - because, hypothetically , you were building an open-source white hat firewall, or an CircuitPython chaos inciter, or you can only do one pull-up and just ate a whole bag of Bugles. Then maybe spending a couple bucks on a webcam blocking sticker wouldn't seem so ridiculous. They're pitch black, like an eye-hole-free balaclava for your monitor's built-in webcam, and have an inset, minimal black cover to rep your privacy concerns. The metal slider is supe r-thin so your laptop can easily shut even if you have the fanciest new Applebook. Also works great on phones and tablets with a flat glass camera area. Unlike our other Webcam Cover-ups, these have a neat, tiny sliding window, so the camera is not permanently covered.
Instructions: 1. Clean the camera surface. 2. Remove the 3M tape backing. 3. Place the webcam cover over the camera. 4. Press firmly and hold for a few seconds. It will be fully adhered after 24 hours! Again, we're not claiming anyone's watchi ng you. All we're saying is that they might be - and isn't that good enough? TECHNICAL DETAILS Webcam cover: 11.5 x 7 x 0.8mm https://www.adafruit.com/product/3799 5‐31‐18