370XA EMERSON-NETWORKPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Features
The enclosure meets CSA Class I, Division 1 certification and is easy to use. The enclosure comes with the gas chromatograph prewired to an external Class I, Division 1 junction box, reducing the complexity of installation and saving you time and costs. Designed for Extreme Environments UV, sea-water and fungi resistance Ability to lock and lead-seal the enclosure to prevent unauthorized 3rd party access Reduced Installation Costs Small, composite clamshell replaces the need for a conventional single room or dual room analyzer building that is cost prohibitive for lower volume applications Enclosure enables locating the Rosemount 370XA Gas Chromatograph close to the sample point, shortening the heated sample lines Internal tubing and wiring plumbed and connected to the Rosemount 370XA Gas Chromatograph before arriving in the field for easier and quicker field installation Ease of Use No need to remove the Rosemount 370XA Gas Chromatograph from the enclosure to perform routine maintenance as the enclosure is designed with sufficient space and big hands in mind Enclosure’s clamshell lid with stainless steel lid stays and spring loaded retainer chains is easy to lift yet will not close accidentally for increased safety Heat-trace boot entry tubing for sample gas ensures thermal stability to keep the gas sufficiently above its Hydrocarbon Dew Point of the gases to avoid liquid fallout
2 Emerson.com/RosemountGasAnalysis February 2018Rosemount 370XA Enclosure Part Number Ordering Matrix Your part number is determined by your specific needs. Choose options below 370ENC – XXX – XX –XX – XXX – XXX – X Mounting Option F – Frame Bottle Racks NON – None CAR – Rack for 2 x Carrier gas cylinder Calibration Gas Option INT – Mounting for internal LP5 Calibration gas cylinder EXT – Bulkhead connection for external Calibration gas cylinder No. of Streams (SCS needs to be ordered separately) 1G - 1 Stream Plate 2G - 2 Stream Plate 3G - 3 Stream Plate Heater Option E1 – Electric heater, 120 VAC, T3 Class E2 – Electric heater, 230 VAC, T3 Class N1 – No heater Approval CSA – CSA and CSAus, Class I, Division 1 GEN – No Hazardous Area rating on cabinet, Constructed with C1D1 components *GC needs to be ordered as Wall Mount. Sample conditioning system for the Rosemount 370XA GC must also be ordered. Optional Accessories Sample Probe Regulator 2-4-5000-610 (4'') - Genie® Probe Regulator with HSNG/GAG/RLF, ¾'' NPT, 4'' 2-4-5000-617 (7'') - Genie® Probe Regulator with HSNG/GAG/RLF, ¾'' NPT, 7'' 2-3-5000-702 - Genie® Drive Probe with HSNG/GAG/RLF, ¾'' NPT, Adjustable Length Carrier Gas & Calibration Gas Accessories 2-3-5000-050 - Carrier Manifold (Allows for cylinder replacement without GC interruption) 2-4-9500-078 - Regulator, for Carrier cylinder, with CGA 580 fittings, Dual Stage for High Purity gases 2-4-9500-077 - Regulator, for Calibration Gas, CGA-510 fittings (Natural Gas) 2-9-0020-945 - C6+ Calibration gas in LP5 cylinder 2-9-9020-779 - Calibration Heater Blanket, 50 W, Class I, Div.1, Groups C, D (15 x 42) 2-9-0000-994 - Bottle rack (Holds two Carrier cylinders) 7A00013G03 - Rack for 2 x Carrier cylinders and 1x 5-gallon Calibration gas bottle
3Emerson.com/RosemountGasAnalysis February 2018 Rosemount 370XA Enclosure Specifications Please consult Rosemount if your requirements are outside the specifications listed. Improved performance, alternate products and material offerings may be available depending on the application. Dimensions Construction Environmental Temperature: Protection Rating: External Junction Box: NEMA 4X Area Safety Certification Options: GEN: No Hazardous Rating, C1D1 components CSA: CSA and CSAus Class I, Division 1 Optional Heater: Electric, 120 VAC or 230 VAC, 300 W, T3 Total Weight (Excludes Calibration Gas Cylinder) 300 lbs (136 Kg) Material: Enclosure: Hot-pressed glass fiber reinforced polyester Frame: Polyester-epoxy coated, 12 gauge low-carbon steel Dimensions: Enclosure: 24'' H x 52'' W x 24'' D (609 mm H x 1320.8 mm W x 609 mm D) Overall (with lid open): 84'' H x 58'' W x 35'' D (2142 mm H x 1479 mm x 889 mm D) Mounting: Frame Left View Front (Door Opened) Right View
Emerson Automation Solutions 6021 Innovation Blvd. Shakopee, MN 55379, USA +1 800 999 9307 or +1 952 906 8888 +1 952 949 7001 GC.CSC@Emerson.com North America Regional Office Emerson Automation Solutions 8200 Market Blvd. Chanhassen, MN 55317, USA +1 800 999 9307 or +1 952 906 8888 +1 952 949 7001 GC.CSC@Emerson.com Latin America Regional Office Emerson Automation Solutions
1300 Concord Terrace, Suite 400
Sunrise, FL 33323, USA +1 954 846 5030 +1 952846 5121 GC.CSC@Emerson.com Europe Regional Office Emerson Automation Solutions Europe GmbH Neuhofstrasse 19a P .O. Box 1046 CH 6340 Baar Switzerland +1 954 846 5030 +1 952846 5121 GC.CSC@Emerson.com Asia Pacific Regional Office Emerson Automation Solutions Asia Pacific Pte LTD
1 Pandan Crescent
+65 6777 8211 +65 6777 0947 GC.CSC@Emerson.com Middle East and Africa Regional Office Emerson Automation Solutions Emerson FZE P .O. Box 17033 Jebel Ali Free Zone - South 2 +971 4 8118100 +971 4 88665465 GC.CSC@Emerson.com The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount and Rosemount logotype are trademarks of Emerson. All other marks are the property of their respective owners. © 2018 Emerson. All rights reserved. Google.com/+RosemountMeasurement Youtube.com/user/RosemountMeasurement Facebook.com/Rosemount Twitter.com/Rosemount_News Analyticexpert.com Linkedin.com/company/Emerson-Automation-Solutions