MODEL36 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

© TT electronics plc Issue C 04/2017 Page 1 TT Electronics | BI Technologies

4200 Bonita Place, Fullerton, CA USA 92835-1053 |Ph: +1 714-447-2300

www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Features:  6 mm single turn  Open frame  Cermet  RoHS compliant Model Styles Available Electrical Mechanical Resistance Range 100 to 1 MEG Ohms Standard Resistance Tolerance ± 20% Input Voltage, Maximum 100 V Power rating, Watts 0.3 @ 70°C End Resistance, Maximum <500 ohms: 10 Ohms Max; > 500 ohms: 2% Max. Actual Electrical Travel 215° ±5° Insulation Resistance, Minimum 100 Megohms Resolution Essentially infinite Contact Resistance Variation 5% Max. Temperature Coefficient of Resistance ±250 ppm/°C Mechanical Travel 240° ±20° Rotational Torque 30 to 300 gf.cm Weight, Approx. 0.01 oz. Wiper Position Approx. 50% Mechanical Stop Strength 0.5K gf.cm Min. Top Adjust 36F Side Adjust 36K Side Adjust 36W Top Adjust (2.5 mm pin spacing) 36P

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies www.ttelectronics.com | sensors@ttelectronics.com Issue C 04/2017 Page 2 Environmental

Ordering Information

Circuit Diagram Standard Resistance Values, Ohms Operating Temperature Range -30°C to +100°C Rotational Life, 50 Cycles ±10% DR Load Life, 0.3W, 500 Hours, 70°C ±5% DR Resistance to Solder Heat 260°C for 3 sec. Aqueous cleaning not recommended

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies www.ttelectronics.com | sensors@ttelectronics.com Issue C 04/2017 Page 3 Outline Drawings