36PS SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

www.sensata.com Copyright © 2018 Sensata Technologies, Inc. 36PS SERIES | PRESSURE SWITCHES AUTOMATIC RESET TECHNICAL SPECIFICATIONS Features and Benefits Introduction

Applications

  • Hermetically Sealed Sensor
  • Snap Acting/Automatic Reset
  • Wide Temperature Range
  • Environmentally Sealed and Vented
  • Factory Calibrated Set Points
  • Compact and Lightweight for Direct Mounting
  • Excellent Set Point Repeatability & Temperature Stability
  • Narrow Tolerance and Hysteresis
  • High Vibration Capability Sensata’s 36PS pressure switch offers a number of design features that ensure accurate, reliable performance in low pressure, dry circuit applications. The all-metal construction of this hermetically sealed “free disc” switch allow the product to remain extremely stable over life. Compatible with most fluids, this product is rated up to 1M cycles. Sensata Technologies has been a leading global supplier of pressure sensors and switches for over 50 years.
  • Construction Equipment
  • Agricultural Equipment
  • Compressors and Pumps
  • Hydraulics and Pneumatics
  • Engine Controls
  • Process Control
  • Automation Systems
  • Industrial Systems
  • Marine Engine/Equipment Operating Pressure 500 psig (34 bar) Proof Pressure* 600 psig (41 bar) Burst Pressure 5000 psig (345 bar) Life at Rate Current 1,000,000 cycles 0-300 psig/milliamp load 100,000 cycles 0-500 psig full amperage Electrical Ratings 5 mA @ 9 Vdc to 2A @ 28 Vdc 5.8 FLA/34.8 LRA @ 120 Vac 2.9 FLA/15.0 LRA @ 240/277 Vac Dielectric Strength 750 Vrms Open Contacts

1500 Vrms Terminals to Fittings (ground)

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. Lead Wire Material #16 & #18 AWG 600 V 105ºC 1/32” PVC Quick Connects .250” x 0.032” straight male spa Others upon request; call Sensata Ambient Temperature -40ºF to 257ºF (-40ºC to 125ºC) (4% setpoint shift @ 100ºC) Fluid Temperature -65ºF to 275ºF (-53.9ºC to 135øC) All dimensions in millimeters [Inch] (Additional configurations are available. Contact Sensata: sensors@sensata.com) TYPICAL PHYSICAL CHARACTERISTICS Typical Standard Fittings All dimensions in millimeters [Inch] (Additional fittings are available. Contact Sensata: sensors@sensata.com)

www.sensata.com CONTACT US Americas +1 (800) 350 2727 sensors@sensata.com switches@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 pressure-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 3 Rev:03/30/18 Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Common Port Fittings 1/8”– 27 NPTF male 3/8”– 24 UNF male o-ring 1/4”– 18 NPTF male 9/16”– 18 UNF male o-ring 1/4” SAE male flare M 10 x 1 male o-ring 1/4” SAE female flare 1/4” O.D. copper or stainless steel braze tube WARNINGS HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury