3691.000000 LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Description
0$/3(0$+$,21 .*3&(,4$01(-,1 '-")1 %$" 1(,& 8(!0 2(-,0$1(12 ,2 TE5® -30(,(+3+ 1$" 6(+3+ +1(,1$" 6 +1(, 1$" 6 +1(, +1 6
Applications
Electrical Characteristics for Series % of Ampere Rating Opening Time Agency Approvals Agency Agency File Number Ampere Range Electrical Characteristics Specifications by Item Power Dissipation 1.5 x IN max. (mW) Melting Integral 10 x IN min. (A2s) Agency ApprovalsVoltage Drop 1.0 x IN max. (mV) Amp Code Amp Rating (A) Breaking Capacity Voltage Rating (V) 1100 1160 1200 1315 1400 1500 1630 1.00 1.60 2.00 3.15 4.00 5.00 6.30 300 300 300 300 300 300 300 115 400 600 700 1100 1200 1000 1200 5.80 13.50 21.00 55.00 100.00 90.00 126.00 X X X X X X X X X X X X X 50A@300VAC 50-60Hz/cos =1
Revised: May 5, 2009 Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 164 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Radial Lead Fuses
369 Series
TE5® > Time-Lag > 369 Series Please refer to www.littelfuse.com/series/369.html for current information. 0.001 0.01 0.1 100 1000 10000 100000 CURRENT IN AMPERES TIME IN SECONDS 0.1 1 10 100 1000 .800A 1.25A 1.6 A 2.5A3.15A 4A 5A 6.3A Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: Average Time Current CurvesT emperature Rerating Curve
Revised: May 5, 2009 165© 2009 Littelfuse, Inc. Specifications are subject to change without notice. Radial Lead Fuses TE5® > Time-Lag > 369 Series Please refer to www.littelfuse.com/series/369.html for current information. Tape & Ammopack Short Leads 0000 0440 1,400 1,400 N/A N/A N/A N/A Dimensions Part Numbering System 369 xxxx 0000 Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Packaging Code 0000 Tape/Ammopack (1,400pcs.) 0440 Short Leads - Bulk (1,400pcs.) 8.5 max.4 5.08 0.6 1.5 Holes in PCB 1 + 0.1 0.5 min max. 8 Long Leads (L=18.8mm) Short Leads (L=4.3mm) Climatic Category -40°C / +85°C / 21days Stock Condition +10°C to +60°C relative humidity 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15min. Each (EN60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10g acceleration Product Characteristics Operating Temperature -40°C to +85°C (considerde-rating)Materials Base/Cap: Brown Thermoplastic Polyamide PA6.6, UL 94 V0 Round Pins: Tin-plated Copper Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260°C, ≤ 3s (Wave) 350°C, ≤ 1s (Soldering Iron) Soldering Heat Resistance 260°C, 10s (IEC60068-2-20) 350°C, 3s (Soldering Iron)