104MLR100K ILLINOISCAPACITOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com Polyphenylene sulphide MLR Epoxy Dipped Radial Lead Metallized Polyphenylene Sulphide Film Capacitors Operating Temperature Range Capacitance Tolerance -40°C to +125°C ±10% at 1kHz, 20°C Damp Heat Test Load Life Test Insulation Resistance Rated Voltage VDC 100 Dissipation Factor (max) at 20°C 15000MΩ Minimum, 100VDC applied for 60 seconds 1,000 hours at 125% of rated VDC and at 105°C Capacitance Change Dissipation Factor Insulation Resistance ≤5% of initial measured value ≤200% of maximum specified value >50%of mimimum specified value ≤5% change from initial value. ≤0.005 at 1kHz and 25°C >33%of minimum specification Self-inductance ≤1 nH/mm along the capacitor pitch and lead wire length. Capacitance Drift Factor Temperature Coefficient ≤1.0% up to 40°C after 2 years 0 ppm/°C, ± 100ppm/°C Dielectric Electrodes Leads Vacuum deposited metal layers Wound Metalized film Lead free Tinned copper wire Coating Flame retardant epoxy sealed resin (UL 94V-O) Freq. (kHz) 1 .1% .3%100 Construction Dielectric Strength 150% of rated WVDC applied between the terminals for 60 seconds 200% of rated WVDC applied to the terminals and the case for 1 to 5 seconds
- Automotive
- Audio
- Polycarbonate alternative
- Temperature stable
- High temperature
- RoHS compliant For T> +105°C the applied voltage must be decreased by 1.5% per °C Capacitance Change Dissipation Factor Insulation Resistance 500 hours at 40°C ±2°C with 90-95% relative humidity and 100% of rated WVDC PART NUMBERWVDC Capacitance (µF) dv/dt (v/µs) Maximum RMS current 1kHz,20°C. LxHxT (mm) 0.18 100 184MLR100K 15 0.1 13x10x6 8.0 0.6 0.22 100 224MLR100K 15 0.09 13x10x6 8.0 0.6 0.27 100 274MLR100K 15 0.072 13x11x7 8.0 0.6 0.33 100 334MLR100K 15 0.05 13x12x8 9.0 0.6 0.36 100 364MLR100K 15 0.04 13x12x8 9.0 0.6 S (mm) d (mm) T max d L max S±1.5 H max min. G
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com MLR Enviromental and frequency characterisitc graphs Epoxy dipped Radial lead Metallized Polphenylene Sulphide Film Capacitors Frequency Character Capacity Change (%) 103 104 2 5 5 21 0 5 106 5 2 4 -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 0.2 0.3 0.4 0.5 -0.1 0.1 -40 -30 -20 -10 100 20 30 40 50 60 70 80 90 100 110 120 130 (°C) Capacity Change (%) Temperature vs Capacitance Temperature Frequency (Hz) Dissiapation Factor (%) 103 104 2 5 5 21 0 5 106 5 2 0.01 0.1 1.0 Temperature vs tanδ Dissipation Factor (tanδ) vs Frequency.